Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

Integration of local–global upscaling and grid adaptivity for simulation of subsurface flow in heterogeneous formations

We propose a methodology, called multilevel local–global (MLLG) upscaling, for generating accurate upscaled models of permeabilities or transmissibilities for flow simulation on adapted grids in heterogeneous subsurface formations. The method generates an initial adapted grid based on the given fine-scale reservoir heterogeneity and potential flow paths. It then applies local–global (LG) upscaling for permeability or transmissibility [7], along with adaptivity, in an iterative manner. In each iteration of MLLG, the grid can be adapted where needed to reduce flow solver and upscaling errors. The adaptivity is controlled with a flow-based indicator. The iterative process is continued until consistency between the global solve on the adapted grid and the local solves is obtained. While each application of LG upscaling is also an iterative process, this inner iteration generally takes only one or two iterations to converge. Furthermore, the number of outer iterations is bounded above, and hence, the computational costs of this approach are low. We design a new flow-based weighting of transmissibility values in LG upscaling that significantly improves the accuracy of LG and MLLG over traditional local transmissibility calculations. For highly heterogeneous (e.g., channelized) systems, the integration of grid adaptivity and LG upscaling is shown to consistently provide more accurate coarse-scale models for global flow, relative to reference fine-scale results, than do existing upscaling techniques applied to uniform grids of similar densities. Another attractive property of the integration of upscaling and adaptivity is that process dependency is strongly reduced, that is, the approach computes accurate global flow results also for flows driven by boundary conditions different from the generic boundary conditions used to compute the upscaled parameters. The method is demonstrated on Cartesian cell-based anisotropic refinement (CCAR) grids, but it can be applied to other adaptation strategies for structured grids and extended to unstructured grids.     

大洋粘土制备白炭黑后的铝回收实验研究

为了回收大洋粘土制备白炭黑后残液中的Al3 ,并获得氧化铝超细粉体,实验选用NH3.H2O为沉淀剂,在常温下采用沉淀法使残液中Al3 以氢氧化铝形式沉淀并去除其它杂质离子,然后将得到的沉淀在1200℃灼烧,保温1h。利用IR和XRD测试了产物的物相组成和结构,证实实验可以获得纯度较高的α-Al2O3;而SEM和粒度分析结果显示产物粒度细小,部分颗粒可以达到纳米级;BET结果显示Al2O3的比表面积可达32m2/g。根据氧化铝结构和性能等优选的实验条件为大洋粘土的进一步开发利用提供了参考依据。     

Application of membrane technology for water treatment： Ultrasound-associated cleaning of fouled microfiltration membranes

The use of membranes is a widely employed, versatile, and effective separation process. One of the limiting aspects in applying microfiltration （MF） for wastewater treatment is that of problems with membrane fouling and consequent flux reduction. Membrane fouling occurs by the irreversible deposition of retained particles, colloids, macromolecules, salts, etc. at the membrane surface and/or inside the membrane. The predominant fouling mechanisms observed with MF membranes are classified as three categories： the build-up of a cake layer on the membrane surface, blocking of membrane pores, and adsorption of fouling material on the membrane surface or in the pore walls. Although many techniques have been developed to overcome fouling, studies on membrane cleaning still seem to be insufficient for practical membrane filtration systems. Current membrane cleaning technologies include hydraulic, chemical, and mechanical methods. Ultrasound （US） has been widely used as a method of cleaning materials because of the cavitation phenomenon. In this study, US cleaning technique was applied to removing the fouling of polyvinglidenefluoride （PVDF） MF membrane, which was used to treat yeast cell and isolated soybean protein （ISP） solution, respectively. The US employed 40 kHz frequency and the output power of 1.43-2.85 W/cm^2. The evolution of the cleaning effect is followed by the measurements of the flux recovery rate （FRstat） and the cleaning time cycle. Results showed that the membrane property, which was fouled by yeast cell solution, could be recovered by water cleaning with US irradiation. And the cleaning time with the same FRstat decreased with the increase of US intensity.     

Exploring the spatial and temporal dynamics of land use in Xizhuang watershed of Yunnan, southwest China

Over the last two decades, China has introduced a series of agricultural and forestland use reforms, aiming to feed the largest population in the world and maintain ecological services locally and nationally. This paper studies the impacts of local government-driven reforestation on land use and land cover change, as well as its further impacts on livelihoods of upland farmers in Xizhuang watershed. An analysis of aerial photographs and ASTER satellite imagery from 1987 to 2002, respectively, showed that the forest has significantly increased at the expense of decreasing farmland. However, the monoculture reforestation of pine has caused both biophysical and socio-economic consequences. This case study also shows forestry decentralization in China remains incomplete. Land use and land cover change is also a political economic issue. Some of the reforms designed to protect forest resources have had a negative impact on rural livelihoods.     

多因素复杂系统最佳因素权重确定的一种新思路——以深港西部通道工程深圳湾公路大桥为例

为了客观地反映各因素对目标问题的影响程度,本文首次提出了最佳因素权重概念。定义最佳因素权重为研究区域内系统质量处于极限状态时的各因素权重之组合。结合深港西部通道工程深圳湾公路大桥桥址比选方案,详细说明了本方法的研究思路及其确定方法。通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。