Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

小波分析理论在GPS技术中的应用

在GPS数据处理中 ,存在着误差影响、影响波的干扰、周跳和数据量大等问题。误差影响和影响波的干扰实质是在接收卫星信号时受到其它因素的影响 ;周跳是由于卫星信号的失锁而造成信号的不连续 ;数据量大是因为GPS观测需要采样间隔小又连续观测所致。由于小波理论具有时频分析、波形分解、特征提取和快速小波变换等特性 ,应用小波变换和波形分解可以解决误差影响和影响波的干扰的问题 ;应用特征提取可以解决周跳检测问题 ;应用快速小波变换可进行数据压缩     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

Fluid infiltration during contact metamorphism of interbedded marble and calc-silicate hornfels, Twin Lakes area, central Sierra Nevada, California

Abstract In the Twin Lakes area, central Sierra Nevada, California, most contact metamorphosed marbles contain calcite + dolomite + forsterite ± diopside ± phlogopite ± tremolite, and most calc-silicate hornfelses contain calcite + diopside + wollastonite + quartz ± anorthite ± K-feldspar ± grossular ± titanite. Mineral-fluid equilibria involving calcite + dolomite + tremolite + diopside + forsterite in two marble samples and wollastonite + anorthite + quartz + grossular in three hornfels samples record P± 3 kbar and T± 630° C. Various isobaric univariant assemblages record CO₂-H₂O fluid compositions of χCO₂= 0.61–0.74 in the marbles and χCO₂= 0.11 in the hornfelses. Assuming a siliceous dolomitic limestone protolith consisting of dolomite + quartz ° Calcite ± K-feldspar ± muscovite ± rutile, all plausible prograde reaction pathways were deduced for marble and hornfels on isobaric T-XCO₂ diagrams in the model system K₂O-CaO-MgO-Al₂O₃-SiO₂-H₂O-CO₂. Progress of the prograde reactions was estimated from measured modes and mass-balance calculations. Time-integrated fluxes of reactive fluid which infiltrated samples were computed for a temperature gradient of 150 °C/km along the fluid flow path, calculated fluid compositions, and estimated reaction progress using the mass-continuity equation. Marbles and hornfelses record values in the range 0.1–3.6 × 10⁴ cm³/cm² and 4.8–12.9 × 10⁴ cm³/cm², respectively. For an estimated duration of metamorphism of 10⁵ years, average in situ metamorphic rock permeabilities, calculated from Darcy's Law, are 0.1–8 × 10^?6 D in the marbles and 10–27 × 10^?6 D in the hornfelses. Reactive metamorphic fluids flowed up-temperature, and were preferentially channellized in hornfelses relative to the marbles. These results appear to give a general characterization of hydrothermal activity during contact metamorphism of small pendants and screens (dimensions ± 1 km or less) associated with emplacement of the Sierra Nevada batholith.     

Hα Photometry of Two Contact Binaries

We carried out optical and Hα photometry of two contact binaries (V861 Herculis, EQ Tauri). The light curve modeling revealed stellar spots in both contact systems and strong Hα excess in the position of the observed stellar spots. A correlation was found between the V−R and R−H_α colour indices of V861 Her.     

On the Period Variation of the W UMa-type Contact Binary V502 Ophiuchi

The variation in the orbital period of the W UMa type contact binary V502 Oph is analyzed. The orbital period exhibits a wavelike variation with a periodicity of 23.0 years and an amplitude of △P = 1.24×10~(-6) days superimposed on secular decrease of dP/dt = 1.68×10-7 day per year. The long-term decrease may be accompanied by the contraction of the secondary at a rate of 83 m per year and a mass transfer rate from the primary to the secondary of 4.28×10~8 M per year. The short-term oscillation may be explained by the presence of a third component. Orbital elements of the third body and its possible mass are presented.     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

动荷载作用下海底粉土的孔压响应及其动强度

本文选用近海分布较广的粉土为研究对象 ,利用室内动三轴试验结果 ,找出动荷载作用下粉土的动应力应变关系 ,分析模拟波浪荷载作用下粉土中的孔压响应、临界循环次数 ,确定波浪作用下粉土的应力状态、破坏临界循环次数 ,判断不同深度处的粉土发生液化的可能性及发生液化所需要的时间 ;研究粉土在动荷载作用下的强度降低 ,为海上工程设计和施工提供科学依据。     

动力定位系统与单波束测深仪在科考船定点作业中的应用

科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响，导致工作效率降低，原位测量精度下降，甚至影响作业安全。动力定位系统 （DP） 具有自动定位功能，能够抵抗外界环境因素的影响，可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深，也可反映水下设备深度信息，可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上，分析 DP 系统与单波束测深仪工作原理，以“向阳红 01”船为载体，在定点作业时开启 DP 系统与单波束测深仪，发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全，可为其他科考船定点作业提供参考。