On salinity regimes and the vertical structure of residual flows in narrow tidal estuaries

An examination is made of the circulation in narrow estuaries subject to a predominant tidal forcing. Velocity structures are derived separately for residual flow components associated with (a) river flow, (b) wind stress, (c) a well-mixed longitudinal density gradient and (d) a fully stratified saline wedge. Dimensionless parameters are introduced to indicate the magnitude of each component and these parameters are evaluated for 9 major estuaries, thereby revealing their sensitivity to each component.For a channel of constant breadth and depth, formulae are deduced for the length of saline intrusion, L. Comparisons with observed data show that such formulae may be used with confidence to predict changes in L arising from variations in river flow, tidal range or channel depths.The level of stratification is shown to be related to a product of two parameters, one associated with velocity structure and a second involving the square of the ‘flow ratio’ $\text{u}\text{u}\text{?}$ (i.e. residual velocity/amplitude of the tidal velocity). This relationship provides a simple classification system for estuarine stratification which can be used to indicate the sensitivity of any particular estuary to changing conditions.     

Origin of Fe-Ti Oxide Ores in Mafic Intrusions: Evidence from the Panzhihua Intrusion, SW China

Economic concentrations of Fe–Ti oxides occur as massive,conformable lenses or layers in the lower part of the Panzhihuaintrusion, Emeishan Large Igneous Province, SW China. Mineralchemistry, textures and QUILF equilibria indicate that oxidesin rocks of the intrusion were subjected to extensive subsolidusre-equilibration and exsolution. The primary oxide, reconstructedfrom compositions of titanomagnetite in the ores and associatedintergrowths, is an aluminous titanomagnetite (Usp₄₀) with 40wt % FeO, 34 wt % Fe₂O₃, 16·5 wt % TiO₂, 5·3 wt% Al₂O₃, 3·5 wt % MgO and 0·5 wt % MnO. This compositionis similar to the bulk composition of the oxide ore, as inferredfrom whole-rock data. This similarity strongly suggests thatthe ores formed from accumulation of titanomagnetite crystals,not from immiscible oxide melt as proposed in earlier studies.The occurrence of oxide ores in the lower parts of the Panzhihuaintrusion is best explained by settling and sorting of densetitanomagnetite in the ferrogabbroic parental magma. This magmamust have crystallized Fe–Ti oxides relatively early andabundantly, and is likely to have been enriched in Fe and Tibut poor in SiO₂. These features are consistent with fractionationof mantle-derived melts under relatively high pressures (10kbar), followed by emplacement of the residual magma at 5 kbar.This study provides definitive field and geochemical evidencethat Fe–Ti oxide ores can form by accumulation in ferrogabbro.We suggest that many other massive Fe–Ti oxide depositsmay have formed in a similar fashion and that high concentrationsof phosphorus or carbon, or periodic fluctuation of fO₂ in themagma, are of secondary importance in ore formation. KEY WORDS: ELIP; Fe–Ti oxide ore; layered intrusion; Panzhihua; QUILF     

利用卫星遥感资料对南海北部陆架海洋表层温度锋的分析

利用7年(1993～1999)月平均的SST卫星遥感资料，分析了南海北部陆架区域海洋表层温度锋在一年中的逐月变化特征，表明南海北部陆架海洋表层温度锋存在明显的季节内变化。结合风场的卫星遥感资料，分析了东北季风对南海北部陆架温度锋的影响，表明东北季风风速的增加有利于温度锋强度的增强。通过对黑潮南海流套入侵较强的1999年2月与流套入侵较弱的1998年2月的SST卫星遥感资料的对比分析，考察了黑潮南海流套的入侵对南海北部陆架温度锋的影响，结果表明黑潮流套的较强入侵能够增加陆架温度锋的强度，对温度锋的走向也会产生一定的影响。     

Periodic Intrusion of Cold Water from the Pacific Ocean into the Bottom Layer of the Bungo Channel in Japan

A cold-water intrusion, called a “bottom intrusion”, occurs in the lower layer of the Bungo Channel in Japan. It is an intrusion from the shelf slope region of the Pacific Ocean margin in the south of the channel. In order to reveal the fundamental characteristics of the bottom intrusion, we conducted long-term observations of water temperature at the surface and bottom layers of the channel and 15-day current observations at the bottom of the shelf-break region. The long-term water temperature data indicated that the bottom intrusion occurs repeatedly between early summer and late autumn, and its reiteration between early and mid-summer causes a local minimum of water temperature in the lower layer in mid-summer. Moreover, the data revealed that most of the bottom intrusions occurred in neap tidal periods. The current meter recorded a bottom intrusion with a speed of approximately 15 cm⋅s⁻¹. The current meter also revealed that the intruded cold water slowly retreated back to the shelf slope region after the intrusion. This revised version was published online in July 2006 with corrections to the Cover Date.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

燕山东段地区与花岗岩有关的几个问题探讨

详细研究了燕山东段地区花岗岩类的侵入时代、产出形式和成因类型 ,指出该区与花岗岩有关的三个金属成矿系列。     

Effects of geology and human activity on the dynamics of salt-water intrusion in three coastal aquifers in southern Spain

 Mathematical modelling of salt-water intrusion processes in three aquifers on the southern coast of Spain (Río Verde, Río Vélez and Castell de Ferro) reveals that, although all three systems are subject to the same climate and seasonal over-exploitation, geological and human factors have very different effects on the dynamics of contamination. In the Río Verde aquifer, the most important influence is the high volume of extractions occurring during the dry season; in Río Vélez, the intrusion is strongly controlled by infiltration of water from the river to the aquifer, and, in the Castell de Ferro system, an intensely karstified carbonate massif lying in contact with both the sea water and the detrital aquifer represents the main entrance point for influx of sea water and subsequent washing of the aquifer. We have undertaken a mathematical simulation of various possible measures to counteract intrusion, according to the specific characteristics of the process in each aquifer. These measures include artificial recharge, use of natural recharge from the river as a hydraulic barrier, and the construction of a low-permeability barrier. Received: 5 December 1995 · Accepted: 12 April 1996     

冀西北东坪金矿床含金石英脉石英流体包裹体Rb-Sr等时线及其地质意义

用石英流体包裹体Ｒｂ－Ｓｒ等时线法测得产于碱性岩体中具有超大型潜力的东坪金矿床含金石英脉的年龄为（１０３±８）Ｍａ，远晚于赋矿岩体的就位时间（元古宙），显示了成岩与成矿是两期不同构造运动的产物，两者之间没有直接的成因联系。８７Ｓｒ／８６Ｓｒ示踪结果显示成矿物质主要来源于赋矿碱性岩体。研究结果认为，东坪金矿是后期与大气降水热液有关的改造成矿作用的产物。     

关于侵入岩体中金矿床成因研究若干问题的讨论

各时代、不同类型侵入岩中的金矿床是金矿的主要类型。关于金矿床与岩体的成因关系目前尚存在不同的看法，但传统的岩浆热液成因观点仍居统治地位，其原因往往在于不少研究者把岩液热液成因当成了固定模式应用于具体矿床的研究，而不是建立在综合研究的基础之上。本文结合近年来金矿的研究进展，强调侵入岩中金矿床的研究的研究要综合考虑成岩成矿的时代与时差，成矿流体和成矿物质的来源等各方面因素。金矿床定年的进展研究表明，矿     

The Shape and Volume of the Skaergaard Intrusion, Greenland: Implications for Mass Balance and Bulk Composition

Re-examination of the Skaergaard intrusion in the context ofits regional setting, combined with new data from explorationdrilling, has resulted in a revised structural model for theintrusion. It is modelled as an irregular box, c. 11 km fromnorth to south, up to 8 km from east to west, and 3·4–4km from the lower to the upper contact. The walls of the intrusionare inferred to follow pre-existing and penecontemporaneoussteep faults, and the floor and roof seem largely controlledby bedding planes in the host sediments and lavas, similar toregional sills. The suggested shape and volume are in agreementwith published gravimetric modelling. Crystallization alongall margins of the intrusion concentrated the evolving meltin the upper, central part of the intrusion, best visualizedas an ‘onion-skin’ structure inside the box. Thetotal volume is estimated to c. 280 ± 23 km³, of which13·7% are referred to the Upper Border Series (UBS),16·4% to the Marginal Border Series (MBS) and 69·9%to the Layered Series (LS). In the LS, the Lower Zone (LZ) isestimated to constitute 66·8%, the Middle Zone (MZ) 13·5%and the Upper Zone (UZ) 19·7%. The new volume relationshipsprovide a mass balance estimate of the major and trace elementbulk composition of the intrusion. The parental magma to theSkaergaard intrusion is similar to high-Ti East Greenland tholeiiticplateau basalts with Mg number c. 0.45. The intrusion representsthe solidification of contemporary plateau basalt magma trappedand crystallized under closed-system conditions in a crustalreservoir at the developing East Greenland continental margin. KEY WORDS: bulk composition; emplacement; mass proportions; Skaergaard intrusion; structure