岩石受压破裂的ULF和LF电磁前兆信号

实验观测到了4类岩性、18块样品在单轴压力下直至破裂发生全过程中的ULF和LF电磁前兆信号。这些不同频率的信号是零散出现的，其形态为一组组脉冲，宽度为4ms～16ms，幅度为0．1mV～1．4mV。实验发现具同一谐振频率的天线收到的信号频次与其相对于裂缝的位置和方位有关。结果还表明，电磁前兆信号的频度与岩样强度有关，抗压强度高的岩样电磁前兆信号多。微破裂可能产生了偶电层，在破裂过程中向外辐射，产生了LF频段的磁信号，ULF磁信号则主要由压磁效应产生。     

最大熵原理与地震频度-震级关系

地震是一种随机事件 ,它的发生具有极大的不确定性 ,因而可以用熵来进行描述。地震以最无序的方式在各地发生 ,意味着地震熵达到了极大值。古登堡 (Gutenberg)和里克特 (Richter)根据资料和经验得出的地震频度 -震级关系式实际上是在给定的约束条件下 ,当地震熵取极大值时得到的一种负指数分布。文中从最大熵原理得出了同一形式的地震频度 -震级关系 ,使它的来源从理论上得到了解释     

首都圈地区中等地震前小震活动异常特征分析

近年来首都圈地区以中等地震活动为主，本文用反映地震频率、能量、平均震级的基本参量如频率、缺震、断层总面积、地震活动度等研究该区中等地震前的活动性异常特征，发现这些异常对1999－2001年首都圈地区的中等地震有较好的对应关系，当同时出现三项低值异常后，有震预后准确率较高。这些方法对首都圈地区中等地震的短期预报有重要作用，2001年12月28日滦县M14．2级地震就是用该方法在震前做了较成功的预测。由于参量指标与地震间的映震效果具有一定的阶段性和区域性，需要用发展变化的眼光，时刻跟踪并不断调整改进所使用的参量指标，才能更好地捕获地震信息。     

面波群速度频散计算中滤波的数值实验研究

面波群速度计算中容易出现长周期部分时间域分辨率低的问题，因此，如何提高时间域的分辨率很重要。本文将引入等误差滤波的方法就改进群速度计算中滤波效果进行数值试验。结果表明，采用等误差滤波能明显提高群速度长周期部分的分辨率，对准确地测定长周期部分的群速度有重要意义。     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

时频测控技术的发展

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。     

从118.75 GHz附近六通道亮温反演大气温度廓线的数值模拟研究

为了能在静止气象卫星上实现微波被动遥感探测大气温度廓线,并保持一定的地面空间分辨率(如视场小于60 km),就需要使用高频微波及大天线.欧洲和美国下一代静止气象卫星上都已考虑采用118.75 GHz附近通道.为了充分了解118.75 GHz附近通道遥感反演温度廓线的能力,为仪器研制及今后资料的解释反演提供必要的基础数据,作者开展了采用118.75 GHz附近六个通道遥感反演大气温度廓线的数值模拟研究.统计反演的数值试验表明,118.75 GHz附近六通道对温度垂直分布有一定的遥感反演能力;温度反演较好的层次对应于权重函数峰值所在的位置.     

VLBI观测的电离层延迟改正模型研究

电离层是大气层中的一个电离区域，高度范围大约在60－1000km。电磁波信号穿越电离层时其传播速度会发生变化，传播路径也会略微发生弯曲，从而使信号的传播时间乘以在真空中的光速不等于信号源至测站的几何距离。对VLBI观测来讲，电离层引起的差异可达近百米百米。文中从电磁波的传播原理出发，讨论了信号传播速度和传播路径变化引起的VLBI观测延迟；对目前采用的各种电离层延迟模型进行了分析总结；并指出单频率VLBI观测应顾及高阶项和路径弯曲的影响或使用区域性电离层延迟改正模型。     

陕西气象信息数据库应用平台综合设计

硬盘一旦出现故障，对每一个使用电脑的人来说简直就是一场灾难，因为硬盘里的数据比硬盘本身的价值更大，如何将其损失降到最低限度，这是非常值得研究的。