Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.     

The new wave overtopping database for coastal structures

Significant effort has been made to generate a homogeneous database on wave overtopping consisting of more than 10,000 irregular wave overtopping tests from more than 160 independent projects or test series, each described by means of 31 parameters. Many coastal structures, including dikes, rubble mound breakwaters, berm breakwaters, caisson structures and combinations have been considered and have been schematised for inclusion in the database. All these overtopping tests are represented by over 300,000 numbers in the database.     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

琼东南盆地深水区断层垂向输导及成藏模式

In the Qiongdongnan Basin, faults are well developed.Based on the drilling results, the traps controlled two or more faults are oil-rich. However, when only one fault cut through the sand body, there is no sign for hy-drocarbon accumulation in the sandstone. In terms of this phenomenon, the principle of reservoir-forming controlled by fault terrace is proposed, i.e., when the single fault activates, because of the incompressibility of pore water, the resistance of pore and the direction of buoyancy, it is impossible for hydrocarbon to ac-cumulate in sandstone. But when there are two or more faults, one of the faults acts as the spillway so the hydrocarbon could fill in the pore of sandstone through other faults. In total five gas bearing structures and four failure traps are considered, as examples to demonstrate our findings. According to this theory, it is well-advised that south steep slope zone of Baodao-Changchang Depression, south gentle slope zone of Lingshui Depression, north steep slope zone of Lingshui Depression, and north steep slope zone of Baodao Depression are the most favorable step-fault zones, which are the main exploration direction in next stage.     

北部湾三维潮流场数值研究(英文)

本文对北部湾三维潮波进行了数值研究,并将所得结果与现有观测资料作了比较。通过比较发现两者相当一致。文中还绘制了M_2和K_1分潮的同潮图,并对其作了讨论。可以断定,北部湾的日潮优势是由日潮共振所引起的。M_2和K_1分潮流的水平分布表明,强流区位于它们各自的蜕化无潮点附近。还讨论了分潮流的铅直结构,可以看出这种结构十分接近实际分潮流场的特征。     

A New Probability of Detection Model for Updating Crack Distribution of Offshore Structures

1 .IntroductionNondestructiveinspection (NDI)isveryimportantforensuringthereliabilityofoffshorestructuresintheirservicelives (Lauraetal.,1 996 ) .Itiswellknownthatdetectionofflawsinvolvesconsider ablestatisticaluncertainties.Asaresult,theprobabilityofdetection (POD)forallflawsofagivensizehasbeenusedintheliteraturetodefinethecapabilityofaparticularNDItechniqueinagivenen vironment.SincethedataofPODusuallyscatterlargely ,itisdifficulttodeterminewhichmodelfitstheavailabledatabest.Thismodelun…     

珠江口东南近海海区污损生物研究

为研究珠江口东南近海海区污损生物状况,于1986年5月至1987年6月,在香港东南约114和160km,水深为95和113m处布设了两个生物浮标站,并对距香港约172km,水深为115m处的Marex水文气象浮标上的污损生物群落进行调查.此次调查共采集和鉴定出污损生物78种,其中在浸海只有3个月的试板上,主要有柄蔓足类、水螅和藻类,优势种是细板条茗荷、茗荷和直杯螅.至于浸海时间达6～12个月的浮标(包括沉标)及锚链系统,其上还有相当数量的多种双壳类软体动物、无柄蔓足类和苔藓动物等硬性污损生物附着.在种类垂直分布方面,污损生物群落组成随深度发生明显变化.     

基于拉格朗日拟序结构的黑潮区域海流运输结构提取和分析

海流的拉格朗日运动对于研究物质输送有着重要意义,拉格朗日拟序结构(LCSs)作为研究海流结构的新型方法,相比于传统欧拉方法更为客观。本文提出了一种新的计算LCSs束的方法,基于25年的平均速度场,利用变分方法计算得到黑潮区域的气候态LCSs,并通过简化合并的方法得到了气候态LCSs束,该LCSs束能够突出地显示出海流特性和运输模式,其代表的平均拉格朗日环流有很强的约束作用,且具有鲁棒性。最终我们获得了气候态下12个月份的流场结构图,揭示了月周期性拉格朗日环流规律。本文还利用虚拟粒子输运、多年浮标轨迹以及气候态温盐异常3种方法进行了验证,与拉格朗日运输模式相吻合,证明了海流拉格朗日拟序结构的准确性和可靠性。     

基于拉格朗日拟序结构的吕宋海峡表层水交换研究

黑潮通过吕宋海峡入侵南海呈现明显的瞬态特征。以往的研究通常将黑潮在吕宋海峡附近的流态分为几种不同类型。本文基于表层地转流计算得到的有限时间李雅普诺夫指数场（FTLE）,展示了拉格朗日视角下的吕宋海峡上层水交换特征。从FTLE场提取的拉格朗日拟序结构（LCSs）很好地识别了吕宋海峡附近的典型流态和旋涡活动。此外,这些LCSs还揭示了吕宋海峡周围复杂的输运路径和流体域,这些特征得到了卫星跟踪浮标轨迹的验证,且从流速场中是无法直接识别的。FTLE场显示,吕宋海峡附近表层水体的输运形态主要可分为四类。其中,黑潮直接向北流动的“跨越”形态和顺时针旋转的“流套”形态的发生频次明显高于直接进入南海的黑潮分支“渗入”形态和南海水流出至太平洋的“外流”形态。本文还进一步分析了黑潮在吕宋海峡处的涡旋脱落事件,突出强调了LCSs在评估涡旋输运方面的重要性。反气旋涡旋的脱落个例表明,这些涡旋主要源自黑潮“流套”,涡旋脱落之前可有效地俘获黑潮水。LCS所指示的输运通道信息有助于预测最终被反气旋涡所挟卷水体在上游的位置。而在气旋涡的形成过程中,LCS的分布特征表明,大部分气旋涡并未与黑潮水的输运路径相连通。因此,气旋涡对从太平洋到南海的上层水交换的贡献较小。     

Floating and fixed artificial habitats: Spatial and temporal patterns of benthic communities in a coral reef environment

While natural marine habitats with motion capabilities, e.g., kelps and seaweeds, have been studied alongside their associated fouling communities, little is known of the effect of motion on the communities of floating artificial habitats such as buoys, rafts, and pontoons, particularly in tropical systems. Hydrodynamic features greatly differ between floating and fixed artificial substrata, which in turn affect the structure of their associated communities. This study tested the hypothesis that floating and fixed artificial installations in a tropical reef system (Eilat, Red Sea) would support different benthic communities throughout space and time. Specifically, we examined differences in communities recruited onto settlement plates between floating and fixed installations deployed at three different sites, along a two-year monitoring period. The three sites exhibited distinct differences in species assemblages between the monitoring dates (6, 12, 18 and 24 months post deployment), mainly between the first and the last two dates. The average level of dissimilarity between floating and fixed installations increased over time at all sites. Over 50% of the dissimilarity between the floating and fixed installations resulted from five taxonomic groups i.e., bryozoans, bivalves, barnacles, sponges, including the amount of bare space on the settlement plates. The contribution of these groups to the dissimilarity changed both temporally within each site, and spatially among sites. The observed differences were related to the hydrodynamic characteristics of floating and fixed habitats, interacting with biotic features such as predation, successional processes and seasonality; and abiotic features including small-scale spatial changes, light, and position in the water column.