自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

Overbreak and underbreak in underground openings Part 2: causes and implications

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.     

The origin of accretionary lapilli

Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively.     

Structure and energy transfer of unstable hot star winds

Due to the instability of the radiation line force, the winds of hot, luminous stars should show a pronounced time-dependence resulting from the nonlinear growth of initially small perturbations. Following the method of Owocki, Castor & Rybicki (1988), we describe the time-dependent wind structure obtained with an independently developed code. Under the central assumption ofisothermality, our results are in very good agreement with the ones by Owocki et al. We find that the response of the wind to periodic base perturbations remains largely periodic, at least up tor 2...3R _* , with no clear evidence of stochastic behaviour.In order to test the foregoing assumption of isothermality and to compute the X-ray emission from models of structured winds, we have also incorporated theenergy equation into our simulations. We encountered the numerical problem that all radiative cooling zones collapse because of the oscillatory thermal instability (cf. Langer et al. 1981). We present a method to hinder this collapse by changing the cooling function at low temperatures. The resulting wind showsresolved cooling zones; but, for a supergiant wind relatively close to the star (r 10R _* ), the macroscopic wind structure is very similar to isothermal calculations. Most of the hot material is caused by shell-shell collisions.     

新疆地区夏季平流层低层风场特征分析及数值模拟

利用2017年6—8月的FNL再分析资料分析了新疆地区夏季平流层低层风场的时空演变特征，开展了平流层低层风场的高分辨率数值模拟和检验。结果表明：新疆地区夏季平流层纬向风随时间的变化存在经向差异，同时准零风层开始和结束的时间也存在经向差异，准零风层开始时间南部地区早于北部地区，而准零风层结束时间则相反。整个夏季新疆地区上空的准零风层处于70～40 hPa之间，其高度随时间呈先降低而后升高的变化趋势。准零风层数值模拟结果表明，模拟的准零风层参数与探空资料分析结果相比二者存在一致的变化趋势，准零风层起始高度的平均绝对误差为467 m，该高度对应的风速均方根误差为1.75 m/s。     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

The Earthquake Readiness Scale: The Development of a Valid and Reliable Unifactorial Measure

Preparedness is a key dependent variable in many studies examining people’s response to disasters such as earthquakes. A feature of many studies on this issue, however, is the lack of attention given to psychometric issues when constructing measures of preparedness. With regard to earthquake preparation, for example, many studies could be greatly improved by the use of a valid and reliable measure of preparedness. This research developed such a measure that assessed both low-level preparedness, such as having an emergency kit, and high-level preparedness, such as altering home structures to mitigate damage. Studies of Wellington (New Zealand) residents using two samples totalling n=652 showed that 23 items measuring these different aspects of earthquake preparation could be combined into a reliable, valid, unifactorial scale. This brief scale should have utility in multivariate studies of earthquake preparation, either as a dependent variable, where preparation is the outcome variable of primary interest, or as one of several independent variables, where preparation and other measures predict another outcome variable.     

WAFS产品中GRIB资料中国区产品评估

为了给使用WAFS产品的用户提供量化参考依据，选取WAFS产品中常用区域和层次的GRIB数据，利用由国家气象中心提供的风、温客观分析网格点资料，与WAFS中同时刻的预报场产品（风、温网格点资料），用均方根误差进行数字化形式分析比较。结果表明：WAFS提供的风、温预报，通常是短时效的风、温预报比长时效的风、温预报更接近客观分析场；低层的预报比高层的预报更接近客观分析场；风的预报以v矢量的预报优于u矢量的预报；风的误差主要来源于u矢量的误差。