Mass flows and river response in rapid uplifting regions – A case of lower Yarlung Tsangpo basin,southeast Tibet,China

The fluvial geomorphology in tectonically active (particularly rapid uplift) regions often undergoes continuous change. The rapid uplift is coincident with high erosion rates; consequently, incised valleys are formed. Mass flows (for example, avalanches, landslides, and debris flows) in incised valleys can markedly influence fluvial processes and even reshape valley geomorphology. However, these processes and long-term evolution corresponding to mass flows require further clarification. Field campaigns were carried out in the region near the Yigong Tsangpo and Palong Tsangpo Rivers (hereafter the Yigong and Palong Rivers), the two largest tributaries of the lower Yarlung Tsangpo River, to examine the feedback between fluvial processes and mass flows. Remote sensing images from recent decades were used to compare the channel morphology before and after typical mass flows (particularly catastrophic ones). The morphology of the lower Yigong River has evidently been impacted by landslides, while that of the Palong River has mainly been shaped by glacial processes and debris flows. At present, the morphology of the latter consists of alternating sections of gorges and wide valleys, with a staircase-like longitudinal profile. The gorge sections exhibit single and deeply incised channels with a high-gradient channel bed and terraces. In contrast, the wide valley sections consist of lakes, braided or anabranching channels, gentle bed gradients, and thick alluvial deposits. Debris flows occur more frequently in gullies in the reaches of the gorge sections and rarely in gullies along the wide valley sections. The occurrence of mass flow events has resulted in an imbalance of the previous (quasi-)equilibrium in the river morphology; however, this has triggered negative feedback that is driving the transient river morphology to a new state of (quasi-)equilibrium.     

采用复合单元法模拟裂隙多孔介质变饱和流动

采用复合单元法建立了模拟裂隙多孔介质变饱和流动的数值模型。该模型具有以下特点：裂隙不需要离散成特定单元，而是根据几何位置插入到孔隙基质单元中形成复合单元；在复合单元中，分别建立裂隙流和孔隙基质流的计算方程，二者通过裂隙?基质界面产生联系并整合成复合单元方程；复合单元方程具有和常规有限单元方程相同的格式，因此，可以使用常规有限单元方程的求解技术。采用欠松弛迭代、集中质量矩阵以及自适应时步调节等技术，开发了裂隙多孔介质变饱和流动计算程序。通过模拟一维干土入渗和复杂裂隙含水层内的流动问题，验证了该模型的合理性和适用性。模拟结果为进一步认识非饱和裂隙含水层地下水流动特性提供了理论依据。     

孔隙尺度多孔介质流体流动与溶质运移高性能模拟

深入探究孔隙尺度下的流体流动特性和溶质运移规律对石油开采、农田养分管理、地下水污染修复有着重要意义。以人工构建的多孔介质结构和同步辐射X射线显微CT扫描的土壤团聚体(分辨率3.7μm)为研究对象,在空间节点数多达64 000 000的情况下,基于格子Boltzmann模型和GPU并行技术计算得到多孔介质流体运动和溶质运移过程的关键参数,并据此探究多孔介质空间异质性对水力学特性的影响。通过对3组不同结构的多孔介质比较发现,结构复杂程度最高的土壤样品和不规则堆叠的圆球结构的渗透率在100 mD(即10^-13m^2)量级,远低于规则堆叠的圆球结构(>20 000 mD);土壤的迂曲度为1.40~1.60,明显高于规则堆叠的圆球结构。研究结果表明,渗透率大的样品具有较小的迂曲度,这与结构的空间异质性有较强的关系;土壤的渗透率和迂曲度呈现各向异性;在水力梯度一定的前提下,渗透率较大的样品,纵向弥散系数也较大;同时,结构的异质性也会影响溶质的穿透曲线。本研究提出的模拟方法可在土壤结构中进行高效的水流运动和溶质运移模拟,可用于土壤多孔介质在孔隙尺度下的水力学特性研究。     

风浪作用下水生植物对水流结构的影响——以太湖中两种典型沉水植物为例

为研究风浪作用下水生植物对水流结构的影响,选取太湖中两种典型沉水植物(苦草与马来眼子菜)为研究对象,分别对苦草植物斑块与马来眼子菜植物斑块内外水体的瞬时流速进行野外现场测量,利用瞬时流速的能量谱分布将波浪流速与紊动流速分离,分别分析水生植物对时均流速、波浪流速以及紊动能的影响。风浪影响下,水体中存在流向与测量时近水面处盛行风向一致的水流;波浪流速以垂向流速为主,且波浪流速自水面向床底逐渐减小;紊动能在水面处达到最大值,并向床底方向逐渐减小。与无植被条件相比,苦草与马来眼子菜的存在减小了时均流速、波浪流速以及紊动能。两种植物形态上的差异,导致其对水流结构的影响不同:苦草叶片阻流面积在冠层中部达到最大,使得时均流速与波浪流速在苦草中部位置的减小程度最大;马来眼子菜叶片主要集中于冠层顶部(水面附近),其对时均流速以及波浪流速的减小作用在水面处达到最大。     

黄山第四纪泥砾沉积物分形结构特征与成因机制分析

黄山第四纪泥砾沉积物粒度组成的分维值介于２７０８～２７３５之间,非常接近古泥石流堆积物粒度组成的典型分维值２７５．结合沉积特征,表明该沉积物属第四纪间冰缘环境下的稀性泥石流沉积,其形成过程与季风型冰缘环境有关     

油气成藏流体动力系统分析原理及应用

阐述了油气成藏流体动力系统分析的基本原理,把油气成藏流体动力系统分为重力驱动型、压实驱动型、滞流型和封存型四种类型。结合国内外的研究实例,分析了不同类型流体动力系统油气藏形成和分布的规律,强调在不同类型的流体动力系统中,油气藏形成的机理不同,在成藏动力学研究中有不同的侧重点。加强重力驱动型和封存型流体动力系统动力系统油气成藏条件研究对我国南方海相盆地和其它勘探程度较高的盆地深部的油气勘探具有重要意义。     

扩散波的时空反演与洪水实时预报技术

以扩散波方程描述天然河道中的洪水波运动规律。将数学物理反问题理论和离散反演算法与河道流量演算相结合提出了扩散波实时预报的方法。该法的特点是在求解流量场Ｑ（ｘ,ｔ）的同时反演计算扩散波波速Ｃ（ｘ,ｔ）和扩散系数Ｄ（ｘ,ｔ）,根据不断监测的新信息系列,直接利用原偏微分方程进行参数的实时校正和预报过程实时修正。     

土壤水全时空调控的初步探讨

农业是第一用水大户,有利利用土壤是实现黑龙港地区农业可持续发展的关键,本文分析了黑龙港地区主要作物需水与降水的关系,建立了作物生长条件包气带流动系统的概念,并以此为基础提出了土壤水全时空调控的概念,探讨了土壤水全时空调控的涵义与措施,指出土壤水调控是一系统工程,必须多种措施有机结合,简单介绍了王瞳试验场开展的田间土壤水调控试验成果。     

湘黔地区中奥陶世海平面上升的沉积响应

中奥陶世克拉道克阶(Caradocian)在全球范围内为海侵期,体现在全球范围广泛的黑色页岩沉积及笔石动物的大规模繁盛,湘黔地区这一时期地层发育完全,从碳酸盐台地-斜坡-外陆架盆地均有不同程度的响应。在台地区表现为碳酸盐台地的淹没,斜坡区表现为碳酸盐重力流及黑色页岩、粉砂岩沉积,形成碳酸盐与陆源碎屑的混合沉积,而在外陆架盆地区表现为黑色岩系大规模发育及笔石的大量繁盛。     

Accounting for Estimation Optimality Criteria in Simulated Annealing

This paper presents both estimation and simulation as optimization problems that differ in the optimization criteria, minimization of a local expected loss for estimation and reproduction of global statistics (semivariogram, histogram) for simulation. An intermediate approach is proposed whereby an initial random image is gradually modified using simulated annealing so as to better match both local and global constraints. The relative weights of the different constraints in the objective function allow the user to strike a balance between smoothness of the estimated map and reproduction of spatial variability by simulated maps. The procedure is illustrated using a synthetic dataset. The proposed approach is shown to enhance the influence of observations on neighboring simulated values, hence the final realizations appear to be better conditioned to the sample information. It also produces maps that are more accurate (smaller prediction error) than stochastic simulation ignoring local constraints, but not as accurate as E-type estimation. Flow simulation results show that accounting for local constraints yields, on average, smaller errors in production forecast than a smooth estimated map or a simulated map that reproduces only the histogram and semivariogram. The approach thus reduces the risk associated with the use of a single realization for forecasting and planning.