中国大陆7级以上地震频次场时空异常特征

本文以地震频次作为地震活动的变量,通过自然正交函数展开方法,计算中国大陆7级以上强震前的地震活动频次场,提取出强震前时间因子和空间等值线的异常。结果表明,强震前时间因子出现超过均方差的高值或低值异常,异常多数分布在频次场的前4个典型场,具有多分量特点,第1个典型场异常贡献率最大(占总场40%～60%),绝大部分强震前5～8年出现长期异常,部分强震前1～2年出现中期异常,少数强震前3月出现短临异常的特征。区域频次等值线出现的高梯度旋涡区域是异常危险区,等值线值大于0.9且具有活动构造的危险区往往是强震的发震位置。另外,地震频次场与传统方法的区域地震活动频次(3月)震例对比,表明频次场时间因子异常具有自己的独特优越性和缺陷,并讨论了这些方法的差异性。     

柴达木盆地北缘冷湖七号构造油气成藏过程与模式

本文在对冷湖七号油气成藏条件综合分析的基础上,依据构造发育史与烃源岩生、排烃史,结合流体包裹体均一温度,分析了冷湖七号构造油气藏形成期次和过程,总结了东、西2个构造高点的油气成藏模式。研究结果表明:①冷七1井N12层包裹体主要为含烃盐水包裹体和气态烃有机包裹体,其均一温度明显分为60~70℃和110~130℃两个峰值区,对应地质时间分别为N21—N22时期和N2末—现今。结合源岩生、排烃史和构造演化史分析表明N12—N22时期为冷湖七号油气成藏的主要时期;②冷湖七号东高点N21气藏形成机理与模式为:断控同生隆起—单源供烃—不整合、断裂输导—浮力驱动—次生型断裂遮挡油气成藏模式;西高点E3油藏形成机理与模式为:同生隆起—双源供烃—不整合、断裂输导—浮力驱动—残留型原生油藏成藏模式。     

页岩气水平井TOC测井评价新方法

由于存在地层缺失、井眼穿层不断变化、重点层段测井曲线较少、井眼环境复杂、测井响应值与储层参数关系较为复杂等特点,页岩气储层水平井测井解释难度较大.针对该问题,本文采用“水平井钻遇地层模型—水平井间及水平井与直井响应差异分析—水平井曲线校正—基于直井的参数评价模型”的评价技术流程,进行页岩气水平井TOC测井评价.在测井评...     

井筒电加热改善水平井蒸汽吞吐效果机理实验

针对稠油水平井蒸汽吞吐面临入井渗流阻力大、产量水平低、吞吐递减率高、采收率偏低等问题,提出了电加热辅助水平井蒸汽吞吐方法.首先根据水平井蒸汽吞吐过程中的电加热与蒸汽复合传热特征,建立了电加热辅助蒸汽吞吐三个阶段的(注汽阶段、焖井阶段、生产阶段)储层升温解析模型,在此基础上,设计并开展了电加热辅助蒸汽吞吐和常规水平井吞吐...     

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

混合表面活性剂存在下镓与O—Cl—PF显色反应的研究

本文研究了在pH 6.5-7.8的(CH_2)_6N_4-HCl缓冲介质中,CDMAA和TritonX-100对Ga与o-Cl-PF和F~-显色反应的增敏作用。结果表明,Ga-o-Cl-PF-F-CDMAA-TritonX-100多元配合物λ_(max)为565nm,表观摩尔吸光系数ε=1.74×10~5L·mol~(-1)·Cm~(-1),Ga含量在0～6.0μg/25ml范围内符合比尔定律,用合成样和标样进行本方法考验,结果满意。     

Nitrogen and sulfur species in Antarctic aerosols at Mawson,Palmer Station,and Marsh (King George Island)

High volume bulk aerosol samples were collected continuously at three Antarctic sites: Mawson (67.60° S, 62.50° E) from 20 February 1987 to 6 January 1992; Palmer Station (64.77° S, 64.06° W) from 3 April 1990 to 15 June 1991; and Marsh (62.18° S, 58.30° W) from 28 March 1990, to 1 May 1991. All samples were analyzed for Na⁺, SO ₄ ^2– , NO ₃ ^– , methanesulfonate (MSA), NH ₄ ⁺ ,²¹⁰Pb, and⁷Be. At Mawson for which we have a multiple year data set, the annual mean concentration of each species sometimes vary significantly from one year to the next: Na⁺, 68–151 ng m^–3; NO ₃ ^– , 25–30 ng m^–3; nss SO ₄ ^2– , 81–97 ng m^–3; MSA, 19–28 ng m^–3; NH ₄ ⁺ , 16–21 ng m^–3;²¹⁰Pb, 0.75–0.86 fCi m^–3. Results from multiple variable regression of non-sea-salt (nss) SO ₄ ^2– with MSA and NO ₃ ^– as the independent variables indicates that, at Mawson, the nss SO ₄ ^2– /MSA ratio resulting from the oxidation of dimethylsulfide (DMS) is 2.80±0.13, about 13% lower than our earlier estimate (3.22) that was based on 2.5 years of data. A similar analysis indicates that the ratio at Palmer is about 40% lower, 1.71±0.10, and more comparable to previous results over the southern oceans. These results when combined with previously published data suggest that the differences in the ratio may reflect a more rapid loss of MSA relative to nss SO ₄ ^2– during transport over Antarctica from the oceanic source region. The mean²¹⁰Pb concentrations at Palmer and Marsh and the mean NO ₃ ^– concentration at Palmer are about a factor of two lower than those at Mawson. The²¹⁰Pb distributions are consistent with a²¹⁰Pb minimum in the marine boundary layer in the region of 40°–60° S. These features and the similar seasonalities of NO ₃ ^– and²¹⁰Pb at Mawson support the conclusion that the primary source regions for NO ₃ ^– are continental. In contrast, the mean concentrations of MSA, nss SO ₄ ^2– , and NH ₄ ⁺ at Palmer are all higher than those at Mawson: MSA by a factor of 2; nss SO ₄ ^2– by 10%; and NH ₄ ⁺ by more than 50%. However, the factor differences exhibit substantial seasonal variability; the largest differences generally occur during the austral summer when the concentrations of most of the species are highest. NH ₄ ⁺ /(nss SO ₄ ^2– +MSA) equivalent ratios indicate that NH₃ neutralizes about 60% of the sulfur acids during December at both Mawson and Palmer, but only about 30% at Mawson during February and March.     

应用地震资料设计水平井轨迹

应用三维地震资料设计水平井的轨迹,用人工合成记录标定层位和岩性并进行精细的构造解释和储层横向预测,对测区速度场进行研究,利用Geoquest 人机联作解释系统编绘层拉平图、转弯测线剖面图,不整合面构造图,各套油层顶面构造图,沿地层倾向设计水平井的轨迹.经两口井钻探,钻遇不整合面的误差0.19%—0.39%,一口井平均钻遇油层204m,相当9口直井的效益.用地震资料设计巷道水平井的关键是油层标定、深度标定和确定油层走向,用人机联作系统绘制水平切片图、反射波振幅图、油层顶构造图,设计了在油层内钻探的巷道井.经钻探,钻遇不整合面的误差0.07%,在真厚度8.23m 的油层内钻进563m.     

钛-氨三乙酸-对氯苯基荧光酮-CTMAB四元配合物的分光光度法研究

本文研究Ti(Ⅳ)-氨三乙酸(NTA)-对氯苯基荧光酮(p-ClPF)-CTMAB四元配合物的显色条件。结果表明,在pH5.8—6.6形成了摩尔比为Ti(Ⅳ):NTA:p-ClPF:CTMAB=1:1:3:3的四元配合物,借此反应测定钛,灵敏度高,其ε_(573nm)=2.1×10~5L·mol~(-1)·cm~(-1)。Ti(Ⅳ)浓度在0—1.4μg/10ml范围服从比耳定律。已用本法直接测定了岩矿和铝合金中的Ti,结果满意。