余姚—丽水断裂带嵊州地区燕山期主要构造特征

余姚—丽水断裂带是浙东南地区活动时间长、延伸远、发育比较宽的一条NE—NNE展布的断裂构造带,在浙江嵊州地区上火山岩系磨石山群和下火山岩系永康群中构造形迹表现十分明显。余姚—丽水断裂带由一系列NE—NNE向控制区内白垩纪盆地形成与发展的正断层,以及NE—NNE走向、自北西向南东逆冲的叠瓦状断层和轴迹呈NE—NNE向的褶皱组成。通过对其构造活动特征及控制新老地层的时序关系研究,结合区域构造活动规律和时空演化关系等综合分析认为: 正断层形成时间较早,控制白垩纪盆地的形成和发展,与早白垩世岩石圈伸展减薄形成的拉张作用密切相关; 叠瓦状逆冲断层及斜歪褶皱、紧闭同斜褶皱等褶、断构造组合形成于晚白垩世之后,其动力学机制可能与古太平洋构造域向太平洋构造域的转换效应有关。研究成果为深入探讨浙东地区燕山期构造演化提供了新的素材和资料。     

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查新进展

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查项目取得的新进展及主要成果为: 根据岩石组合、动植物化石及同位素年龄等,重新厘定、划分了16个岩石地层填图单位,在多个组段沉积岩层位中首次发现丰富的动、植物化石,建立了各地层年代学格架; 将侵入岩重新解体划分为4个填图单元,并建立了侵入岩年代学格架; 新发现1处规模较大的韧性变形带,主要为逆—左行走滑韧性断层,时代归属于中三叠世末期,为额尔古纳河—阿龙山NE向韧性变形域的南部延伸; 新发现矿(化)点20处,其中金属矿点3处,金属矿化点6处,非金属矿点9处,非金属矿化点2处; 总结了该区成矿规律,圈定了成矿远景区及找矿靶区。     

西藏雅鲁藏布江缝合带中段日喀则地幔橄榄岩中发现金刚石等异常矿物

本文报道了雅鲁藏布江缝合带中段日喀则蛇绿岩地幔橄榄岩中发现与该带东西段蛇绿岩岩体中相似的金刚石和特殊地幔矿物群。日喀则地幔橄榄岩体以方辉橄榄岩为主,含少量二辉橄榄岩和纯橄岩,辉石岩和辉长岩呈脉状产在方辉橄榄岩中。通过重砂分选实验,在465kg的方辉橄榄岩大样中发现了30余种特殊矿物群,包括金刚石、自然金、自然铬、自然铜等自然元素矿物类;碳硅石等碳化物类;方铁矿、赤铁矿、磁铁矿、刚玉、铬尖晶石、金红石、锡石、黑钨矿等氧化物类;镍黄铁矿、方铅矿、辉钼矿、辉锑矿、闪锌矿、毒砂等硫化物类;Ag-Au等合金矿物类;橄榄石、辉石、锆石等硅酸盐岩类;白钨矿等钨酸盐岩类;萤石等氟化物类。金刚石和自然金、自然铬、自然铜连同碳硅石的发现表明岩体存在强还原环境,这套特殊矿物组合指示日喀则地幔橄榄岩可能与雅鲁藏布缝合带其他蛇绿岩一样,经历了深地幔演化过程。     

阿留申俯冲带几何学特征及运动学成因模式

阿留申俯冲带位于环太平洋俯冲带最北端,是东太平洋型俯冲和西太平洋俯冲的过渡区域。该俯冲带火山岛弧距离海沟的距离从东向西逐渐增大,而形成地球上独特的岛弧火山链与海沟V字型斜交的现象。这一现象的运动学成因目前并没有统一的认识。本文通过对阿留申俯冲带几何形态数据、运动学数据进行整理分析,尝试运用构造赤道理论探讨该现象形成的运动学背景。阿留申俯冲带的几何学数据表明:从俯冲带东段(175°E)至俯冲带西段(155°W),火山岛弧距俯冲海沟的距离从80 km增加至250 km。与此同时,俯冲板片的倾角由60°减小至30°。板块的运动学分析表明:相对北美板块,太平洋板块的东段的运动矢量为48 mm/a,向北运动;逐渐转变为西段的78mm/a,向西北方向运动。相对于软流圈,太平洋板块的运动方向没有改变,始终向西北方向运动,速率向西逐渐增加。因此,在俯冲带的东段太平洋板块的绝对运动方向和相对运动方向存在30°左右的夹角,而这个夹角在西段几乎不存在。太平洋板块的绝对运动方向和相对运动方向之间的夹角不同,会导致软流圈对俯冲板片的反作用力差异,从而形成不同的俯冲角度和俯冲带宽度。太平洋板块相对北美板块和相对地幔的速度方向夹角的变化被认为是引起阿留申火山弧与海沟"V"字型斜交的运动学成因。     

车排子凸起与沙湾凹陷过渡带的构造模型

车排子凸起位于准噶尔盆地扎伊尔山前,是夹持在南部四棵树凹陷和东部沙湾凹陷之间的三角构造带。然而对这个三角构造带是原地掩伏构造,山前推覆构造,还是走滑构造控制形成的认识存在争议。目前对于车排子凸起与沙湾凹陷过渡带的构造变形特征以及变形机制的认识尚不清楚。而过渡带是研究该区构造变形与演化的良好区域,精细研究该区域构造几何学与运动学对于揭示其构造变形机制以及认识盆山之间的关系具有积极作用,并对于该区油气勘探具有重要意义。本文以研究区的连片三维地震资料为基础,运用不整合面识别、轴面分析及平衡剖面等方法,对车排子凸起与沙湾凹陷过渡带进行精细的构造解析、建模与构造复原。研究表明,过渡带发育下二叠统（P₁j-P₁f）,中二叠统（P₂x-P₂w）,上二叠统（P₃w）,三叠系（T）,侏罗系（J）,白垩系（K）与古近系-第四系（E-Q）7个构造变形层序。发育佳木河组底部及石炭系内部滑脱层。深部（前二叠系）构造楔发育于整个过渡带,其个数和几何学形态的变化直接影响了上覆背斜形态。构造楔在早二叠世开始楔入,挤压作用持续至三叠纪末期。晚三叠世发育生长地层,显示了P-T构造层褶皱变形的时间,随后三叠纪末期,过渡带受到来自西北缘造山带方向的逆冲推覆构造的叠加作用,表现在后缘发育一系列叠瓦构造,推覆距离约为8 km,南部逆冲断层上盘二叠系-三叠系被剥蚀完全,北部残余少量下二叠统佳木河组。     

陕西凤太矿集区多金属成矿作用的构造控制

陕西凤县-太白(简称凤太)矿集区铅、锌、金、银、铜多金属资源丰富,已发现二十余个大中小型矿床。在大地构造位置上,凤太矿集区位于南秦岭造山带北缘,紧邻商丹缝合带。以往的工作缺乏对矿集区整体的构造研究,本次工作通过比较系统的构造测量和解析,提出在南秦岭晚三叠世碰撞造山过程中,凤太矿集区南北两条边界断裂带的左行走滑运动导致在区内衍生了NNE向主压应力场,从而形成了NWW向复式褶皱、脆韧性剪切带、断裂和节理(纵向破裂)、B型线理,以及NNE向断裂和节理(横向破裂)、劈理、张裂隙等一系列构造组合,所有构造形迹都是在统一构造应力场下随着构造层次不断抬升,脆韧性和脆性递进变形叠加的产物,共同构成了一个大型压扭性走滑双重构造变形系统。在构造几何学上,凤太矿集区整体上表现为一个隔档式复式褶皱,由一组NWW向紧闭复背斜和一组相对宽缓复向斜组成。区内的多金属成矿作用、岩浆活动、动力变质变形作用的同位素年龄数据集中于230~190Ma。综合地质演化和成矿作用的研究成果,提出在南秦岭碰撞造山过程中引发的动力变质变形作用和岩浆活动提供了成矿元素和成矿流体,在温压梯度以及浮力效应的驱动下向上运移至走滑双重构造变形系统中的有利扩容空间中发生充填型和交代型矿化,即凤太矿集区多金属矿床是区域大规模变形变质-岩浆活动-流体作用的产物,是在构造作用这一主导因素控制下形成的一个多金属后生热液成矿系统。     

Late Quaternary Slip Rate of the Xiugou Segment,Eastern Kunlun Fault Zone

The Eastern Kunlun fault zone (EKLF) is a large left-lateral strike-slip fault, whose slip rate is meaningful to seismic hazard assessment and geodynamics of the Tibetan Plateau. Previous studies suggested that the late Quaternary average slip rate was stable and uniform (10~13 mm/a) in the central and western segment of the EKLF. But there were a few researches of accurate slip rate in the central segment on the EKLF. Therefore, we focused on an offset and well preserved alluvial fan from Xiugou basin, located in the east of Xidatan-Dongdatan, to make it clear. Moreover, we used high-resolution satellite images and digital elevation model extracted from SPOT7 stereo image pairs to restore the offset alluvial fan, and combined terrestrial cosmogenic nuclides method, including 13 quartz-rich samples from this fan surface, 1 quartz-rich sample from the main active channel bed and 1 ¹⁰Be depth profile from this fan edge to eliminate the ¹⁰Be concentration of inheritance accurately, with 1 optically stimulated luminescence sample to obtain the reliable age of this alluvial fan together. Referring to field observations, this alluvial fan was offset left-laterally by (1 862±103) m, and its age is (76.55±3.20)~(106.37±3.38) ka which can be determined through the actual geologic setting and improving chi-square test. Thus, we used the Monte Carlo method to obtain a left-lateral slip rate of (20.3+3.5/-2.3) mm/a with 68% confidence envelopes since the late Pleistocene in the Xiugou basin. As a result, combining with the results of previous studies, the left-lateral slip rate indicated that the obviously decreasing activity transferred from late Pleistocene to Holocene on the central segment of the EKLF.     

Geochronology,Geochemistry and Petrogenesis of the Pungco Ophiolite,TibetEI北大核心CSCD

Although the middle section of the Bangong-Nujiang suture zone has been intensively investigated, its tectonic framework and evolution is still controversy. The Pungco ophiolite has a relative complete ophiolitic complex, which is an ideal specimen for studying this tricky problem. LA-ICP-MS U-Pb dating of zircons from the diabasic rock yielded an age of 159.0±2.1 Ma. This age suggests that the Pungco ophiolite was formed in the Late Jurassic, indicating the development of the Late Jurassic ophiolite in the third ophiolitic subzone. The whole-rock major and trace element compositions of diabasic and basaltic rocks exhibit mixed arc and N-MORB geochemical characteristics. Two diabasic samples have (87Sr/86Sr)i values of 0.7055 and 0.7063 and εNd(t) values of 11.28 and 11.84, respectively. The geochemical signatures and formation age of the Pungco ophiolite suggest that this ophiolite was probably produced in an active continental fore-arc setting. It originated from a N-MORB-like depleted mantle source with the involvement of subducted-slab fluids. Considering the regional geological background, the Pungco ophiolite was likely generated during the southward subduction of the Bangong-Nujiang Tethyan oceanic lithosphere beneath the Lhasa terrane, and belongs to a regional archipelagic arc-basin system together with the other Early Jurassic-Early Cretaceous ophiolites from the northern Tibet Lake district. © 2018, Science Press. All right reserved.     

Geochemistry of Khor Um-Safi ophiolitic serpentinites,central Eastern desert,Egypt: Implications for neoproterozoic arc-basin system in the Arabian-Nubian shield

Serpentinites in the Eastern Desert of Egypt are the most distinctive lithological unit in the Arabian–Nubian Shield (ANS) ophiolite sequence which associated with major suture zones. Khor Um-Safi (KUS) serpentinites represent dismembered fragments of ophiolitic rocks located in the central Eastern Desert (CED) of Egypt.KUS serpentinites exhibit affinity to the typical metamorphic peridotites with harzburgitic protolith compositions. Their opaque mineral assemblage (pentlandite, heazlewoodite and magnetite) is similar to that observed in oceanic serpentinites and implies serpentinization under highly reducing conditions. They have refractory major element compositions with Al₂O₃ contents comparable to oceanic and active margin peridotites as well as Pan-African serpentinites. The Cr and TiO₂ contents reflect evolution within a supra-subduction zone (SSZ) environment. This implication is confirmed by the Al₂O₃/SiO₂ and MgO/SiO₂ ratios which akin to ANS ophiolitic peridotites in fore-arc setting. Their enrichment in compatible trace elements (Cr, Ni and Co) reveals a depleted mantle peridotite protolith.Modelling trace elements indicates that they represent the mantle residues from 15 to 20 % melting of spinel peridotite at oxygen fugacity conditions of the QFM + 1 buffer. This range of melt extraction is consistent with the typical range of SSZ peridotite. Oxygen fugacity estimation suggests evolution under more oxidizing regime similar to modern fore-arc basin system. Moreover, this implication indicates that the KUS mantle represents arc lithosphere interacted with arc melt.     

鲜水河断裂带乾宁段岩石特征与内部结构及其物理-化学性质

断裂带的变形行为和断层滑移机制是目前地震研究关注的热点,断裂带岩石特征、内部结构与物理化学性质是确定断层蠕滑或粘滑行为以及断层滑移机制的基础和关键。本文以鲜水河断裂带乾宁段地表出露的断裂岩为研究对象,通过野外地质调查、室内光学显微镜、扫描电镜、粒度统计、粉末X射线衍射分析（XRD）和薄片X射线荧光光谱分析（XRF）等多种研究方法,对鲜水河断裂带岩石特征、结构构造、物性、矿物成分及化学元素分布开展了详细的分析,并探讨了相关变形行为和滑移机制。分析表明：（1）断裂带核部主要由黑色断层泥、浅黄色及黄色断层角砾岩和灰色碎裂岩、灰色断层角砾岩组成,呈单核对称结构;（2）黑色断层泥厚3~5cm,具有快速滑动结构特征,表现为断层粘滑行为。断层泥可划分出13个滑移带,最窄滑移带厚约40μm,至少代表13期古地震事件;（3）断层泥主要由伊利石、高岭石和石英等矿物组成,其中边部伊蒙混层含量异常高,为最新一次古地震的主滑移带。由于伊利石和伊蒙混层（或蒙脱石）为主要黏土矿物的断层泥渗透率低、孔隙流体压力大,以及发现断层泥楔入脉,表明地震过程中断层滑动存在热增压弱化机制;（4）从断层泥不同滑动带中碎块蚀变程度和矿物分布特征来看,地震主滑动带有向碎裂岩方向迁移的趋势。推测断层在滑动过程中,更趋向于向弱矿物含量高（如伊利石、伊蒙混层）、强矿物含量低（如方解石、高岭石）的围岩一侧迁移。