湘中雪家坡脆韧性剪切构造岩地球化学特征

在１∶５万黄材幅区调中，对脆韧性剪切构造岩进行的岩石化学、微量元素、稀土元素研究表明，由中细粒含斑二云母二长花岗岩改造为糜棱岩化花岗岩、初糜棱岩、绢云母糜棱岩、硅化糜棱岩、千糜岩、糜棱片岩等，其化学成分发生了不同程度的改变。化学元素的分散、聚集或不变，既受原岩控制（继承性），又受变形强度和流体的成分、性质、活动性等控制（变化性）。     

内蒙古西拉木伦断裂带韧性变形特征

西拉木伦断裂带在早二叠世末发生了韧性右行走滑，形成了包括韧性右行走滑带、韧性压扁带及弱韧性变形带在内的韧性变形带。据动力和运动分析，表明该韧性变形带为一普通剪切带，其中韧性右行走滑带在平面上以简单剪切为主，韧性压扁带在平面上以纯剪切为主。     

Radon,Lung Cancer Risk and Environmental Geology in Gejiu Area

The incidence of lung cancer in the Gejiu area of Yunnan Province ranks the first in the world.The radon level(indoor,soil) was measured in the Gejiu area by the SSNTD method from 1990 to 1996,The result indicates an extensive high-level of indoor radon in that area though U and Th are lower in local limestones,The indoor radon level of houses located in the geologic fault zone is 6 times high that 2km far from the fault zone.The reason probably is that the radon level of soil in the fault is 6-8 times high that 1 km far from the faults.our data indicate that a lower range of radon levels,0-100Bq.m^-3,exists in healthy families.However,a higher radon level,over 800 Bq.m^-3,is often found corresponding to that of cancer patients‘ homes(the house-owners are suffering from either lung cancer or leukaemia or liver cancer),Obviously,an increase in lung cancer incidence follows an increase in indoor radon level,The risk of cancer induced by indoor radon is no longer an inference,but a fact.     

Streambank fish-shelter structures help stabilize tributary streams in Wisconsin

 A significant proportion of stream sediment yield in North America comes from stream channel and bank erosion. One method used for stream stabilization is the bank installation of timber and stone fish-shelter structures, but there is little evidence for their potential effectiveness. Nine to nineteen years of precise survey data from Coon Creek, Wisconsin, however, show that fish structures enhance sediment deposition along the stream and may retard lateral migration of channels. Such structures have greater utility for sediment control when streams are eroding away a high bank and replacing it with a lower bank. Received: 18 October 1996 · Accepted: 4 February 1997     

蚀变带元素地球化学成矿预测法──以金龙山微细浸染型金矿为例

金矿化作用伴围岩蚀变，且多受断裂控制，反映在地球化学上出现某些元素的异常。在已发现一害矿化体并掌握一般控制矿特征的地区，利用已有工程在蚀变带内连续捡块采样，分析有关批示元素，总结有关的地球化学指标，建立地球化学预测模式，对已知矿体及外围异常进行了地球化学评价。     

松江河电厂小山水电站导流洞出口边坡稳定性分析

小山水电站导流洞出口边坡其地质结构为下部中侏罗世安山岩（αＪ２），其上覆盖了第三纪末第四纪初的玄武岩（βＮ～Ｑ），两者间为不整合接触，不整合面夹有０．１～０．６ｍ厚的粘土状及碎石粘土状夹层，产状倾向河床，倾角±２５°。在上覆玄武岩层中见有高倾角的宽张裂隙带，与不整合面一起构成松动岩体，不整合面为底滑面。通过边界条件的分析和稳定计算，松动岩体的抗滑系数Ｋ＝３．１０２，边坡是稳定的。在施工过程中采取了相应的安全保护措施，导流洞出口提前２８ｍ进洞，节约挖方量６００００ｍ３，提前了工期。经三年多的施工到运行，边坡无异常变化，表明该项优化设计是可行的。     

导水裂隙带高度预测途径探讨

导水裂隙带高度是设计防水煤（岩）柱尺寸的主要技术参数，是煤矿防治水工作的重要内容。详细论述了其研究现状及发展趋势，并提出了履岩体地质环境，履岩体力学环境和数值模拟技术三位一体的综合预测评价方法。     

Structure of the Mount Raymond transverse zone at the southern end of the Wyoming salient, Sevier fold-thrust belt, Utah

The Mount Raymond transverse zone (MRTZ) forms the east-west-trending boundary between the Wyoming salient of the Sevier fold-thrust belt and the Uinta/Cottonwood arch in north-central Utah. Major faults in the zone dip 40° to 45° north. Our structural analysis indicates that the MRTZ contains both contractional and extensional structures. The contractional structures (thrusts and related folds) initially formed as part of a southeast-verging, northeast-trending thrust system. This system gradually curved and merged to the north with the east-verging Absaroka thrust system in the apex of the Wyoming salient. The contrast in trend between structures in the MRTZ and those in the apex of the Wyoming salient reflects the initial curvature of the salient. This curve formed because the stratigraphic sequence involved in thrusting thinned gradually southward, toward the axis of a proto-Uinta arch. The present east-west trend of the MRTZ developed during Laramide uplift of the Unita/Cottonwood arch, an event which tilted the faults into their present position. Cenozoic crustal extension subsequently reactivated segments of the MRTZ. In sum, the evolution of the MRTZ illustrates how post-thrusting processes can affect the map-view geometry of thrust belts to create transverse zones.     

Interpretation of S-wave data from Tai’an-Xinzhou DSS profile and its relationship with Xingtai earthquakes

On the basis of S wave information from Tai’an-Xinzhou DSS profile and with reference to the results from P-wave interpretation, the 2-D structures, including S-wave velocity V _s, ratio γ between V _p and V _s; and Poisson’ s ratio σ, are calculated; the structural configuration of the profile is presented and the relevant inferences are drawn from the above results. Upwarping mantle districts (V _s≈4.30 km/s) and sloping mantle districts (V _s≈4.50 km/s) of the profile with velocity difference about −4% at the top of upper mantle are divided according to the differences of V _s, γ and σ in different media and structures, also with reference to the information of their neighbouring regions; the existence of Niujiaqiao-Dongwang high-angle ultra-crustal fault zone is reaffirmed; the properties of low and high velocity blocks (zones) including the crust-mantle transitionalzone and the boudary indicators of North China rift valley are discussed. A comprehensive study is conducted on the relation of the interpretation results with earthquakes. It is concluded that the mantle upwarps, thermal material upwells through the high-angle fault, the primary hypocenter was located at the crust-mantle juncture 30.0∼33.0 km deep, and additional stress excited the M _S=6.8 and M _S=7.2 earthquakes at specific locations around 9.0 km below Niujiaqiao-Dongwang, the earthquakes took place around the high-angle ultra-crustal fault and centered in the brittle media and rock strata with low γ and low σ values. This subject is part of the 85-907-02 key project during the “8th Five-Year Plan” from the State Science and Technology Commission.     

40Ar/39Ar geochronology and exhumation of mylonitized metamorphic complex in Changle-Nanao ductile shear zone

New⁴⁰Ar/³⁹Ar plateau ages from rocks of Changle-Nanao ductile shear zone are 107.9 Ma(Mus), 108.2 Ma(Bi), 107.1 Ma(Bi), 109.2 Ma(Hb) and 117.9 Ma(Bi) respectively, which are concordant with their isochron ages and record the formation age of the ductile shear zone. The similarity and apparent overlap of the cooling ages with respective closure temperatures of 5 minerals document initial rapid uplift during 107–118 Ma following the collision between the Min-Tai microcontinent and the Min-Zhe Mesozoic volcanic arc. The⁴⁰Ar/³⁹ Ar plateau ages, K-Ar date of K-feldspar and other geochronologic information suggest that the exhumation rate of the ductile shear zone is about 0.18–1.12 mm/a in the range of 107–70 Ma, which is mainly influenced by tectonic extension.