冀中平原深部地下热水资源可更新特征与依据——以辛集馆陶组地下热水系统为例

针对冀中平原深部地下热水资源可更新性问题,以辛集馆陶组地下热水系统为例,采用相同开采强度下地下热水位降幅异常变化的识别方法,通过2000年以来该地下热水位年际及月际降幅与开采量和上游山区年降水量之间响应变化特征研究,结果表明:(1)冀中平原辛集地区馆陶组地下热水资源具有一定的可更新能力,与上游山区年降水量变化相关,还与地下水位埋深、当年开采引起的水位降幅大小和开采疏干层位砾粗砂岩及细砂岩占比状况有关;(2)辛集地区馆陶组地下热水大规模开采,是该地下水系统获得上游区侧向流入补给的必要条件,属于开采激发型补给,更新补给的资源数量有限;(3)从2000年以来该区地下热水水位动态变化趋势来看,目前该区地下热水资源已处于超采状态,需要压采或人工回灌增大补给,否则难以可持续开发利用。     

贵州桐梓新桥浑水河的成因再探讨

通过对新桥浑水河上游明流段、中部伏流段、下游浑水河段实地调查,并结合该区1:20万区域地质资料、区域水文地质资料及煤矿勘查资料,在分析浑水河区域构造背景及水文地质特征的基础上,研究了浑水河的水动力条件,包括纵向水动力条件和横向水动力条件,认为浑水河是特殊构造通道、水土流失带来的粘土颗粒物源、携带粘土颗粒的水体进入地下伏流,粘土颗粒在河床中沉积后又被流水带出的一个过程,即"流失→带进→沉积→带出"过程。浑水河的成因:1浑水河的特殊构造,具备了通道条件;2上游水土流失带来的大量细小粘土颗粒提供了物源;3洞湾水体"盲谷"是浑水的物源载体;4地下伏流的水动力条件,包括纵向水动力条件和横向水动力条件,四者共同作用的结果。     

长兴岛碳酸盐岩裂隙岩溶水特征分析

长兴岛碳酸盐岩区占整个岛的44%,受降雨、岩性、构造等条件的影响,岩溶较发育,地下水资源较丰富,且水质较好,适宜作为饮用水水源。在收集大量基础地质资料,并结合现场调查、钻探、抽水试验成果,分析了从上至下5层岩溶带的发育特征、赋水性规律及补、径、排条件。同时考虑供水水文地质条件,进行了天然资源和开采资源概算,及成井条件、水质的分析评价。     

二连浩特市水资源与经济社会和谐度评价

以二连浩特市人水关系为研究对象,从取水总量和谐度、用水效率和谐度、水生态环境保护和谐度三个方面构建了二连浩特市水资源与经济社会和谐度评价体系。从评价结果可以看出,二连浩特市开展节水型社会建设以来,水资源与经济社会和谐度发生了较显著的改善。评价体系较好地反映了二连浩特市水资源与经济社会和谐度,对北方干旱缺水地区节水型社会建设具有借鉴意义。     

钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

基岩水井压裂增水机理分析

基岩地层压裂增水与岩层性质密切相关,不同岩性其力学性质及其裂隙构造不同,压裂机理与工艺方法就不同。根据基岩地下水岩层特点,结合水力压裂增水试验,着重分析了水力压裂的形成机制,探寻了不同岩层及其力学性质与压裂的关系。     

北方某经济开发区地下水污染调查评价

本文应用污染指数法,对北方某经济开发区及周边地下水水质进行了污染评价,结果表明研究区地下水水质以轻污染和中污染为主,局部地区出现较重污染,主要指标为硝酸盐氮、三氯甲烷和三氯乙烯。通过对工业废水、再生水、河水水质的检测,发现研究区地表水水质与污水处理厂再生水排放密切相关,地下水污染很可能与开发区企业排污有关。由于开发区所处位置的环境敏感性和脆弱性,建议今后在开发区及附近继续开展相关研究,进一步查明地下水的硝酸盐氮及有机污染物来源、污染途径,建立完善的监测体系,以便及时切断污染源,保障城市及当地供水安全。     

扎龙湿地藻类植物群落结构特征及水质初步评价

扎龙湿地是我国北方同纬度地区保留最完整、最原始、最开阔的湿地生态系统,地处中温带,属大陆性季风气候。为了探究其藻类植物群落的变化特征及其与水环境的关系,本文于2011年春、夏、秋季对扎龙湿地的藻类植物群落进行调查分析,共发现藻类植物349个分类单位(包括变种、变型),隶属于8门105属,藻类植物群落全年均以绿藻为主导,其组成呈绿藻-硅藻型。优势种中绿藻门主要以镰形纤维藻(Ankistrodesmus falcatus)和四尾栅藻(Scenedesmus quadricauda)为主,硅藻门以弯棒杆藻(Rhopalodia gibba)和隐头舟形藻(Navicula cryptocephala)为主,优势种组成具有明显的季节演替现象。藻类植物细胞密度呈现明显的单峰型,夏季最高,平均为10.74×10~4ind./L。湿地研究区域分为开阔型水域、小型封闭水域、湿地型水域和湖泊型水域四个生态类型,不同水域藻类植物群落结构特征明显不同。经聚类和多维尺度分析,将不同采样点的藻类植物群落分为四组,多样性指数表明湿地水体处于轻度污染或无污染状态。综合研究结果可以认为扎龙湿地的水体基本处于贫营养-中营养状态,只有极少数水域处于富营养状态。     

Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.