非饱和土稳态孔隙比变形理论研究

非饱和湿陷性土与湿胀性土分别具有亚稳态孔隙比结构和超稳态孔隙比结构,广义吸力是维持这种结构稳定的主要因素。随着广义吸力的丧失,两种结构均处于一个不稳定的孔隙状态,土体会向一个更加稳定的孔隙比结构发展。超孔隙比结构孔隙比增大,土体产生膨胀,亚稳孔隙比减小,土体产生收缩。基于这一稳态孔隙比理论,建立了广义吸力丧失引起的孔隙比的增量方程,来统一考虑非饱和土的湿陷性和湿胀性变形特性,并通过经典试验数据验证了增量方程的合理性     

掺砂率对膨润土与砂混合物膨胀特性的影响

膨润土与砂混合物的膨胀特性是评估核废料深层地质处置工程长期性能的重要指标。对比不同膨润土及其与砂混合物的膨胀试验结果可知,对纯膨润土及其低掺砂率混合物,浸水膨胀完成后蒙脱石孔隙比em与竖向应力?v在双对数坐标内呈惟一的线性关系,利用该线性关系可预测浸水完成后不同竖向应力下的体积变化量及不同初始状态对应的膨胀力;对高掺砂率混合物,在砂骨架形成之前,em-?v线性关系成立,随着竖向应力的增大,砂骨架形成,对应的em值脱离em-?v线性关系,混合物中掺砂率越大,脱离该线性关系时的竖向应力就越小。砂骨架形成前,砂颗粒被蒙脱石包围,外力由蒙脱石承担,最终变形量由试样中单位体积蒙脱石的含量决定;砂骨架形成后,竖向应力最终由砂骨架和蒙脱石共同承担。利用砂骨架孔隙比的概念可确定各种不同掺砂率混合物形成砂骨架时的应力起偏点。同时,还可确定混合物能够形成砂骨架的掺砂率范围。     

Behavior of rigid blocks with geometrical defects under seismic motion: an experimental and numerical study

The present work investigates the influence of small geometrical defects on the behavior of slender rigid blocks. A comprehensive experimental campaign was carried out on one of the shake tables of CEA/Saclay in France. The tested model was a massive steel block with standard manufacturing quality. Release, free oscillations tests as well as shake table tests revealed a non‐negligible out‐of‐plane motion even in the case of apparently plane initial conditions or excitations. This motion exhibits a highly reproducible part for a short duration that was used to calibrate a numerical geometrically asymmetrical model. The stability of this model when subjected to 2000 artificial seismic horizontal bidirectional signals was compared with the stability of a symmetrical one. This study showed that the geometrical imperfections slightly increase the rocking and overturning probabilities for earthquake signals in a narrow range of peak ground acceleration. Copyright © 2016 John Wiley & Sons, Ltd.     

路基下伏地质缺陷弹性波数值模拟

针对我国西部黄土地区特殊的地形地貌、近地表条件和地下浅层目标体,开展了路基下伏地质缺陷地震探测技术的应用研究。为检验不同地震方法的探测能力,设计了一个综合地质地球物理模型,包含凹陷、断层、地裂缝、地下低速体、软弱夹层及滑坡等典型地质缺陷,利用有限差分波场模拟,计算出多分量反射地震记录和面波地震记录,分别进行了反射波成像和高阶面波反演横波速度成像。数值模拟结果表明,反射波成像和高阶面波反演横波速度成像技术对真实模型中的凹陷、断层、浅层低速体、软弱夹层及滑坡等主要地质缺陷均能清晰成像,验证了地震方法探测路基下伏地质缺陷的可行性。数值计算结果表明,不同的地球物理探测方法对地质缺陷的探测效果和适用范围不同。     

冻融循环作用对黄土微结构和强度的影响

通过对洛川黄土在反复冻融作用下的电镜扫描观测、单轴压缩试验和三轴剪切试验,研究了冻融循环作用对黄土微结构和强度的影响. 结果表明：随着冻融循环次数的增加,黄土的原始胶结结构逐渐被破坏,颗粒重新排列,土的结构越来越疏松,同级压力下土体的孔隙比不断增大;冻融循环50次后土样的原始胶结已完全破坏,当压力超过自重应力时会产生很大的附加变形. 反复冻融作用使黄土颗粒之间原始固有胶结逐渐减弱,造成黏聚力不断降低. 同时,较大的团粒破碎,颗粒均一化,颗粒与颗粒之间的接触点增多,表现为内摩擦角不断增大. 多次冻融循环后,原状黄土的抗剪强度与重塑黄土的强度接近.     

全尾膏体动态压密特性及其数学模型

深锥浓密机是膏体技术中尾矿浓缩工艺的关键设备,深锥浓密机底流质量分数与泥层压力密切相关,孔隙比是表征底流质量分数的重要物理参数,但是孔隙比随泥层压力的变化规律并不清晰。针对这一问题,首先,提出了尾矿可浓缩性能表征的物理概念--有效孔隙比,即孔隙比减去饱和孔隙比;其次,采用某矿全尾砂进行了动态压密试验,结果表明,当泥层高度为31～200 mm,对应泥层压强为2 477～4 410 Pa,获得的底流质量分数范围为73.26%～78.30%,该质量分数范围对应的有效孔隙比为0.433～0.191。回归有效孔隙比与泥层压强数学关系得知,二者遵循幂函数Allometric模型;最后,提出了膏体动态压密数学模型,并根据模型曲线,将膏体动态压密分为3个区域：（1）线性压缩区,孔隙比随泥层压强增大而基本呈线性关系,孔隙比变化幅度较大;（2）衰减压缩区,随着压强继续增大,孔隙比下降幅度变缓,膏体趋于饱和;（3）恒定压缩区,该区域膏体达到饱和状态,孔隙比随着压强增大而基本恒定。该研究揭示了尾矿浓缩过程中孔隙比随泥层压强的变化规律,为浓密机设计及运行提供理论依据。     

南海东北部陆坡冷泉系统的浅地层剖面特征与分析

本文通过对南海东北部陆坡区浅地层剖面资料的处理,结合横跨陆坡区的长地震测线,总结了该区浅层气聚集、海底流体运移、泥火山和冷泉活动在浅地层剖面中的特征,并对剖面中出现的声学空白带现象做了分类.研究认为浊反射、增强反射等现象,反映了该区域存在广泛的浅层气聚集.对声学空白带成因的分析,认为窄空白带很可能对应海底流体运移的通道,而宽空白带则可能由沿地层分布的浅层气引起,同时提出了自生碳酸盐岩体散落分布造成声学空白的可能性.我们在南海东北部陆坡区发现了泥火山,并讨论了其运移通道及对BSR的破坏.同时发现研究区水体中存在声学异常体,推断为冷泉羽状流,指示该区存在活动的冷泉.本文依托大量的浅地层剖面数据,对南海东北部陆坡区的冷泉系统有了较全面的认识,对冷泉系统剖面特征的成因进行了初步探讨,可为南海冷泉系统研究的进一步开展提供有益参考.     

水土压力统一计算理论的提出和发展

地下结构上水土压力的合算与分算既关系到基坑围护的设计,又关系到地下结构的抗拔桩设置。现场数据表明,砂性土采用水土压力分算是合理的,但黏性土采用水土压力合算是否合理一直是学术界与工程界争论的焦点问题。为解决争议,笔者提出了可以统一水土压力合算与分算的方法,作为一个逻辑上自洽的理论,实现了水土分算与合算之间的过渡,为水土合算提供了理论基础。回顾该理论的提出过程,对其合理性做了进一步说明,分析了该理论的学术价值和发展前景。     

桥梁早期病害原因分析及养护浅议

针对高速公路桥梁在使用初期出现的不同病害类型,分别进行了原因分析。     

Undrained Cyclic Pore Pressure Response of Sand–Silt Mixtures: Effect of Nonplastic Fines and Other Parameters

Literature regarding the pore pressure generation characteristics and in turn the cyclic resistance behaviour of silty sand deposits is confusing. In an attempt to clarify the effect of nonplastic fines on undrained cyclic pore pressure response of sand–silt mixtures, an experimental programme utilising around 289 stress-controlled cyclic triaxial tests on specimens of size 50 mm diameter and 100 mm height was carried out at a frequency of 0.1 Hz. Specimens were prepared to various measures of density through constant gross void ratio approach, constant relative density approach, constant sand skeleton void ratio approach, and constant interfine void ratio approach to study the effect of nonplastic fines on pore pressure response of sand–silt mixtures. The effect of relative density, confining pressure as well as the frequency and magnitude of cyclic loading was also studied. It was observed that the pore pressure response is greatly influenced by the limiting silt content and the relative density of a specimen corresponding to any approach. The influence of other parameters such as relative density, confining pressure and magnitude of cyclic loading was as usual but an increase in frequency of cyclic loading was seen to generate excess pore pressure at a higher rate indicating an impact load type of behaviour at higher frequency. Utilising the entire test results over a wide range of parameters a new pore pressure band for sand–silt mixtures in line with Lee and Albaisa (1974) has been proposed. Similarly another pore pressure band corresponding to 10th cycle of loading as suggested by Dobry (1985) and up to a shear strain of around 25% has been proposed. These two bands can readily be used by researchers and field engineers to readily assess the pore pressure response of sand–silt mixtures.