兰州高坪湿陷性黄土地基处理方法分析

根据兰州地区3处大厚度高坪黄土的天然密度、含水量、土粒比重等物理性质指标沿深度变化的统计规律,分析了计算值-天然孔隙比随这些指标的变化规律,得出黄土天然孔隙比简化的计算公式。藉此分析强夯法、挤密桩法等地基处理方法的合理设计参数:对于强夯法,平均夯沉量可以作为初步设计参数和质量检测指标;对于挤密桩法,确定了加固深度和处理后的孔隙比,即可确定桩间距和桩径的比值。     

A new device for investigating the hydro‐mechanical properties of rock joints

A new experimental system composed of two devices is presented for studying the hydraulic conductivity of rock joints and other interfaces in relation with their mechanical loading. This system allows for investigations on the anisotropy of the hydraulic conductivity, as well as for its heterogeneity. The first device controls the injection of a fluid, regulated in pressure or discharge near the centre of the sample of rock joint, which produces a quasi‐radial flow within the joint. The output flow is measured in real time using a sectorized peripheral membrane for acquisition of data about the directionality or anisotropy of the flow. The second device allows for the measurement of the evolution of the morphology and of the void map of the rock joints during their mechanical loading (compression or shearing). It is a laser beam moved by an (x, y) frame. This frame is installed within the shear box at several stages of the loading, after temporarily moving one rock wall away from the other one, but without unmounting them from the shear box. After the presentation of the experimental system, and of its performances, we give some examples of test results of replicas of rock joints, loaded in compression and shearing. First, these results show that the change in global transmissivity of the samples is strongly correlated with the normal relative displacement of the rock walls. Several statistical analyses of the change in the void map, taking into account the damage of the asperities of the joint, are presented and compared with the results of the directional output flows. Today further studies involving a FEM as well as a finite volume modelling of the flow within the joints, based on the measured void map are in progress for a more precise comparison to the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

基于二元介质模型的砂类土剪切波速试验研究

为探究细粒质量分数Fc、相对密度Dr、初始有效围压σ′3c对饱和砂类土剪切波速Vs的影响,基于二元介质模型,对具有不同Fc、Dr和σ′3c的饱和砂类土进行了一系列均等固结弯曲元试验。结果显示：其他试验条件相同时,Vs随Fc的增大而减小;当Dr相同时,Vs与σ′3c的相关性不随Fc的增大而改变;而当Fc相同时,砂类土的Vs随固结后孔隙比ec的增大而减小的趋势与σ′3c的大小无关。研究表明,Vs与单一指标Fc、Dr、σ′3c或ec没有单一的相关性,总体上砂类土的Vs随等效骨架孔隙比e*sk的增大而减小,且两者呈较好的线函数关系,与Fc、Dr、σ′3c或ec值的大小无关,表明能综合反映砂类土颗粒组成、密实状态和粗细粒接触状态的e*sk是表征饱和砂类土Vs的一个有效物理特性指标。     

An efficient approach to generating DEM samples having coincident void ratios with actual sand

The ranges of initial void ratios that can be achieved for numerical samples with the same grading as actual sand under gravity are explored using three-dimensional discrete element method (DEM). A corrected compressible accumulation model is proposed to predict the packing density of sand. Compared with the measured results, the errors of the prediction results are small. For three-dimensional DEM samples, when the ratio of sample size to particle size L/R is equal to or larger than 30, the maximum and the minimum void ratios are minimally affected by the sample size L. The maximum void ratios and the minimum void ratios of numerical samples with spherical particles are much smaller than those of actual sands. The generation method for numerical samples with non-spherical particles is proposed based on the theory of CPM. The variations of void ratios of numerical samples with non-spherical particles are wider than actual sands. So it can meet all the need of DEM simulation on the void ratio of actual sand.     

压缩过程中重塑黏土渗透系数的变化规律

重塑黏土渗透系数是岩土工程众多领域中的一个重要参数,分析其主要影响因素并提出简单实用的定量表达式有着重要的理论价值及工程应用前景。已有的渗透系数预测方法或者由于参数复杂,或者由于适用范围窄、精度低,不能很好地得到应用。收集了已有不同文献23组液限变化范围为40%～300%的重塑黏土的固结渗透试验数据,通过分析指出了土体压缩过程中当应变大于20%时渗透系数对数值与孔隙比成非线性指数关系而非线性关系,明确了已有渗透系数预测方法的主要缺陷。采用多元线性回归分析方法,揭示了影响黏土渗透系数的主要影响因素,提出了适用范围广、参数简单的渗透系数定量计算表达式。     

钢箱梁典型病害分析及其检测与维护技术研究

基于对我国钢箱梁桥的钢箱梁病害调查,总结出我国钢箱梁典型病害的类型,分析各种钢箱梁典型病害产生的机理及导致其破坏的原因,提出了钢箱梁病害的日常检测与维护技术。针对钢箱梁的涂装劣化、钢材腐蚀、结构性损伤等病害,给出了日常检测与维护的主要项目,介绍了人工目视检测、超声波检测、磁粉检测及涡流检测等主要的检测方法的工作原理、优缺点和适用范围。     

Study of dilatancy behaviors of calcareous soils in a triaxial test

Abstract

In this article, the dilatancy of calcareous soil is studied systematically based on triaxial consolidation drainage shear tests, and the difference in dilatancy between calcareous soil and siliceous soil is also investigated. It was found that: ① Calcareous soil experience obvious dilated deformation. Dilatancy tendency increases with increasing related density and decreases with increasing confining pressure. ② The volumetric strain rate initially increases from negative to positive. After it reaches a maximum, there is a small decrease in the volumetric strain rate, but it is still greater than zero, and the stress-strain curves are of softening type. ③ For the same condition, the dilatancy deformation of calcareous sand begins later than that of siliceous sand, and the volume compression before dilatancy is also larger for calcareous sand. ④ The critical state alone cannot accurately describe the entire deformation process of soil, and it is proposed that the phase transformation state be added to the standard method used to assess soil dilatation and contraction. ⑤ Based on the statistical analysis of experimental data, mathematical relationships were established between void ratio, relative density, and effective confining pressure of phase transformation state and critical state, respectively.

• Highlights

• Reports results from a well-designed experiment that includes a good amount of samples and data.

• Effects of relative density and effective confining pressure on deformation mode and mechanical properties of calcareous sand are evaluated.

• The difference in dilatancy between calcareous sand and siliceous sand was compared

• The phase-transformation state and critical state were compared with the axial strain, volumetric strain and deviatoric stress.

• Using phase-transformation void ratio and critical void ratio to describe the whole deformation process of calcareous sand is proposed.

• The mathematical expressions of phase-transformation void ratio and critical void ration were given, respectively.

     

坝体填筑料压缩特性及影响因素分析

堆石料的压缩性直接关系工程的安全问题,对某一抽水蓄能电站坝体填筑料开展多组大型侧限压缩试验,结果表明,堆石料的压缩模量较大、压缩指数很小。只有在应力超过颗粒破碎应力以后堆石料压缩曲线才会发生较大程度的下降,且认为颗粒破碎应力是堆石料发生弹塑性变形的转折点,对于不同初始孔隙比的同一种堆石料,在极高的应力状态下它们的压缩曲线会聚到唯一的极限压缩曲线LCC。压缩曲线中堆石料的卸荷回弹量非常小,表明其是弹性变形。不论何种加载路径材料的初始级配决定了堆石料的最终压缩状态,且随着母岩强度的增加、初始孔隙比或者泥岩含量的减小堆石料的压缩性减小。     

Influence of fines content on the undrained cyclic shear strength of sand–clay mixtures

A series of undrained cyclic triaxial tests were performed on sand–clay mixtures with various sand–clay mixing ratios. Prior to the primary tests, the threshold fines content was examined by consistency tests, which was found to be approximately 20%. For sand–clay mixtures with a sand-matrix (fines content less than the threshold fines content), the cyclic shear strength of low-density mixtures increases and that of high-density mixtures decreases with increasing fines content. However, for sand–clay mixtures with a fines-matrix (fines content greater than the threshold fines content), there exists a unique correlation between the cyclic shear strength and global void ratio for different fines content. The equivalent granular void ratio is introduced in this paper to account for the contribution ratio of the fines to soil skeleton. As a result, a unique relationship between cyclic shear strength and equivalent granular void ratio was observed for pure sand and sand–clay mixtures with a sand-matrix.     

扰动后黏土强度指标与细观参数相关性初探

受扰动后土体抗剪强度常发生衰减,从细观尺度探讨了黏土细观参数与动后强度指标的关系。发现扭剪和单剪对土体静强度影响显著,稳定后强度折减范围在20%～50%,但仍然高于重塑土静强度。随着扰动次数增加,黏聚力与内摩擦角均表现出前期迅速衰减,之后放缓并稳定的趋势。选取了5种典型细观参数进行分析,发现扭剪作用下,土体纵断面与横断面孔隙数增长率相近;单剪作用下,由于径向平面内不存在切应变,横断面的孔隙增长率将小于纵断面。随着细观土颗粒数的增加,黏聚力首先线性下降,之后稳定在较低水平;而内摩擦角未呈现收敛趋势。