Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

区域视觉形象识别系统设计的理论与实践

目前，全国各地正在兴起区域形象设计与建设的浪潮，但如何把区域形象信息系统地传递出去，这方面的理论研究大大落后于实践。文章就区域形象信息传递的有效工具－区域视觉识别系统设计的主要内容，设计的原则，设计的基本流程等在理论与实践上作了较为详细的探讨，并就区域视觉识别系统设计方案的经济学论证作了一些有益探讨。     

洪水演进三维模拟仿真系统可视化研究

洪水演进仿真系统的研制，是实施“数字流域”工程的重要组成部分；结合洪水演进可视化目标的分析，基于Visual C 系统开发平台，融GIS技术和Opengl开发技术，采用三角形逼近、光滑处理和加入法向量以控制光照的方式，实现了流域地形及河床的三维可视化仿真；应用广度优先搜索算法确定了运动水体与流域河床形态的自适应与自相依的关系，使流域洪水演进模拟具有真实自然的可视化效果。所研制的系统雏形，可有效的模拟流域洪水的三维演进过程；     

Stochastic Structural Modeling

A consistent stochastic model for faults and horizons is described. The faults are represented as a parametric invertible deformation operator. The faults may truncate each other. The horizons are modeled as correlated Gaussian fields and are represented in a grid. Petrophysical variables may be modeled in a reservoir before faulting in order to describe the juxtaposition effect of the faulting. It is possible to condition the realization on petrophysics, horizons, and fault plane observations in wells in addition to seismic data. The transmissibility in the fault plane may also be included in the model. Four different methods to integrate the fault and horizon models in a common model is described. The method is illustrated on an example from a real petroleum field with 18 interpreted faults that are handled stochastically.     

柱撑蒙脱石制备与表征

本文采用多种方法制备keggin离子，并探索出制备稳定keggin离子的适宜酸碱度，用此柱化剂制备出层间距为2．4～2．5nm的柱撑蒙脱石。应用X射线走向衍射技术、红外光谱、差热分析对往撑蒙脱石进行表征，用BET、吡啶吸附考察了其表面物理化学性质。结果表明，用Keggin离子制备出的柱撑蒙脱石其层间距在自然状态下为2．4～2．5nm，350C灼烧，层间距稳℃定在1．8nm，且具有耐热性能好、较大的比表面积和较强的Lewis酸位中心等特点．     

塔中地区油气运聚特征

塔中地区主要受塔中Ⅰ号、Ⅱ号及Ⅲ号三条大断层控制 ,形成巨型复式背斜 ,隆起高部位地层遭受了强烈的风化剥蚀。背斜之上 ,断裂和局部构造发育。可划分出两个主要成藏期 :第Ⅰ成藏期为寒武系—下奥陶统烃源岩成熟生烃运移期 ,生排烃高峰为志留纪 ;第Ⅱ成藏期为中—上奥陶统烃源岩在燕山期—喜马拉雅期成熟生烃运聚。第Ⅰ成藏期形成的油藏有两个特征 :在塔中Ⅰ号断裂带、北部斜坡带油气注入奥陶系及志留系圈闭中 ,形成原生油气藏 ;构造高部位 (如中央断垒带 )的油气藏在后期构造运动中遭受破坏。第Ⅱ成藏期形成的油藏可分为两类 :对早期油藏的再次充注 ;聚集形成新油藏。塔中地区的油气运移通道主要有断裂和不整合面 ,油气的分布也主要受断裂和不整合面所控制。塔中Ⅰ号构造带和北部斜坡带是较为有利的勘探区带     

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

基于分层的面状地图符号设计

根据面状符号的结构特征和实现机制 ,提出了基于分层的面状地图符号设计方法 ,把面状符号分为若干层 ,每层采用一种填充方式 ,并在基于VC 的Cartosymbol软件中实现。结果表明 ,该方法既便于地理现象的表达 ,又便于计算机实现。     

时间动态地图模型

就时间动态地图模型进行了研究，认为动态地图由于表达空间维数的增加，使得地图作为客观现实世界的概念模型更加完善，并且作为物质模型，动态地图的可视化应与空间认知的计算机表达紧密融合。在制作时间动态地图时，不同的视觉变量具有不同的动态表现能力，根据时态现象的特征进行选取。