略阳─石泉边界地质体特征

略阳─石泉构造带是一板块缝合带，经历了长期复杂的演化历史。现由不同时期、不同构造体制下的断裂构造系统，裹挟不同构造演化阶段的各类建造─蛇绿混杂岩、陆缘楔状体，岛孤岩浆岩及外来岩块等，共同组成了分隔秦岭、扬子地块的一个特殊边界地质体。     

Numerical models of mantle convection with secular cooling

A 2-D time-dependent finite-difference numerical model is used to investigate the thermal character and evolution of a convecting layer which is cooling as it convects. Two basic cooling modes are considered: in the first, both upper and lower boundaries are cooled at the same rate, while maintaining the same temperature difference across the layer; in the second, the lower boundary temperature decreases with time while the upper boundary temperature is fixed at 0°C. The first cooling mode simulates the effects of internal heating while the second simulates planetary cooling as mantle convection extracts heat from, and thereby cools, the Earth's core. The mathematical analogue between the effects of cooling and internal heating is verified for finite-amplitude convection. It is found that after an initial transient period the central core of a steady but vigorous convection cell cools at a constant rate which is governed by the rate of cooling of the boundaries and the viscosity structure of the layer. For upper-mantle models the transient stage lasts for about 30 per cent of the age of the Earth, while for the whole mantle it lasts for longer than the age of the Earth. Consequently, in our models the bulk cooling of the mantle lags behind the cooling of the core-mantle boundary. Models with temperature-dependent viscosity are found to cool in the same manner as models with depth-dependent viscosity; the rate of cooling is controlled primarily by the horizontally averaged variation of viscosity with depth. If the Earth's mantle cools in a similar fashion, secular cooling of the planet may be insensitive to lateral variations of viscosity.     

Yucatán karst features and the size of Chicxulub crater

The buried Chicxulub impact structure is marked by a dramatic ring of sinkholes (called cenotes if containing water), and adjacent less prominent partial rings, which have been shown to coincide with maxima in horizontal gravity gradients and a topographic depression. These observations, along with the discreteness and spacing of the features, suggest a formation mechanism involving faulting in the outer slump zone of the crater, which would thus have a diameter of approximately 180 km.
An opposing view, based primarily on the interpretation of gravity data, is that (he crater is much larger than the cenote ring implies. Given the association of the known cenote ring with faults, we here examine northern Yucatan for similar rings in gravity, surface features and elevation, which we might expect to be associated with outer concentric faults in the case of a larger, possibly multiring, structure.
No such outer rings have been found, although definite patterns are seen in the distribution of karst features outside the crater rim. We explain these patterns as resulting mainly from deformation related to the block fault zone that parallels tbe shelf edge of eastern Yucatan.     

频率域位场快速正则化反演界面和物性分布

从理论与模型算例两方面对一种以Ｐａｒｋｅｒ公式为基础的频率域位场反演方法做了进一步深入研究。表明它是一种能够更有效地引入低通滤波因子的迭代方法。与改进的正则化稳定因子相结合，提出新的快速正则化反演方法。除了将其用于反演求解均质界面以外，它也被推广至变物性的界面反演以及物性反演     

南天山北缘麻粒岩残迹与辉石相韧性变形研究

对新疆北部南天山北缘蛇绿混杂岩带中麻粒岩的岩石学、矿物学、岩石化学、矿物化学、稀土元素地球化学特征及辉石相韧性变形构造的研究表明,榆树沟麻粒岩的共生矿物组合为透辉石-次透辉石-紫苏辉石-石榴石-斜长石,属基性岩类暗色麻粒岩,以低硅高钙为特征,稀土总量低,轻稀土与铕弱亏损,反映高温高压熔融环境和岩浆分异差的特点。麻粒岩及超镁铁岩中的辉石经历了强烈的韧性剪切变形作用,不对称辉石残斑系、动态重结晶辉石亚颗粒集合体、辉石变形双晶纹、鱼尾构造、核幔构造等显微韧变构造广泛发育。宏观和微观运动学分析揭示了一期从南向北的推覆构造。麻粒岩的形成与早古生代大陆地壳拉伸作用有关,辉石相韧性变形则与早古生代末南天山边缘海的挤压关闭和推覆逆冲有关。     

测氡法快速确定油气田边界及深度

本介绍了运用测氡法快速确定大庆××油气田边界，估算其埋藏深度试验，结果表明，该方法具有可行性和实用性。由于所做工作有限，尚属经验性探讨，还必须从理论和实践上进一步地工作，进而充实、完善它。     

河北唐山—卢龙地区寒武－奥陶系界线地层的牙形刺及其重要属种的演化

本文对唐山和卢龙地区寒武－奥陶系界线地层中的牙形刺再次进行研究，厘定了过去报道的一些重要属种，并对最具地层意义的Ｃｏｒｄｙｌｏｄｕｓ的几个种的演化进行了分析。指出了该属的两个进化系列，第一支进化系列是Ｅｏｃｏｎｏｄｏｎｔｕｓｎｏｔｃｈｐｅａｋｅｎｓｉｓ－Ｃｏｒｄｙｌｏｄｕｓｐｒｉｍｉｔｉｖｕｓ－Ｃ．ｐｒｏａｖｕｓ－Ｃ．ｃａｂｏｔｉ－Ｃ．ｉｎｔｅｒｍｅｄｉｕｓ－Ｃ．ａｎｇｕｌａｔｕｓ；而另一支则是Ｅｏｃｏｎｏｄｏｎｔｕｓｎｏｔｃｈｐｅａｋｅｎｓｉｓ－Ｃ．ｃａｂｏｔｉ－Ｃ．ｐｒｏｌｉｎｄｓｔｒｏｍｉ－Ｃ．ｌｉｎｄｓｔｒｏｍｉ－Ｃ．ｐｒｉｏｎ。本文对寒武－奥陶系界线的几个划分方案也进行了简单的讨论     

The Best Natural Boundary:a New Concept Developed by Combining the Sequence Boundary with the GSSP

Through a detailed study of sequence boundaries, it is concluded that sequence stratigraphy is an independent regional and transitional stratigraphic system between local lithostratigraphy and global chronostratigraphy. Therefore, a new tripartite stratigraphic classification scheme has been proposed. By combining organically the concept of sequence boundaries with the GSSP, it is suggested that the GSSP should be chosen in a conformale portion of a related sequence boundary, and the boundary established in light of this concept is defined as the Best Natural Boundary (BNB). The definition of the BNB points out the working area and stratigraphic level for the GSSP. By referring to a case study of the Permian Guadalupian/Lopingian boundary, the concept of the BNB has been elaborated in detail, and it is proposed that the BNB of the Guadalupian and the Lopingian lies between the Mesogondolella granti Zone and the Ctarkina postbitteri Zone, which is also the sequence chronostratigraphic boundary between th     

Estimation of in situ viscoelastic parameters of weak floor strata by plate-loading tests

Summary This paper explores an approach to estimation of the viscoelastic parameters of weak floor strata using plate-loading tests. Mathematical equations are derived to describe deformation-time history for the standard Burgers model under three-dimensional stress-strain conditions, which are verified with a finite element model. A number of time-dependent in-mine plate-loading tests were conducted and the values of the viscoelastic parameters were estimated based on the derived equation. It is shown that large discrepancies between the parameter values estimated from the plate-loading tests and those acquired from the in-mine convergence data are the results of neglecting adjacent pillar interaction. Finite element modelling was conducted to investigate the effects of adjacent pillar interactions upon the pillar settlement. Based on the finite element analyses, a correction curve was developed to adjust the viscoelastic parameter values to take into account the interaction between adjacent pillars. With the correction, the parameter values estimated from the plate-loading tests compared favourably with those acquired from the in-mine convergence results.