Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

深部地质钻探钻柱失效行为分析

国家的“三深一土”规划确定全面开展深地探测,而在深地探测中钻柱是最重要的连接纽带,其长期在充满钻井液的井眼内工作,受力十分复杂,且受腐蚀、磨损、温度等影响,极易发生钻柱失效事故,造成重大经济损失。研究发现,振动是引起钻柱失效的主要原因,但是深部地质钻探中除了振动引起钻柱失效外,还包括钻柱质量因素、人为因素、钻井质量、套管下入因素、测斜因素以及钻井液因素引起的钻柱失效,本文针对这些影响因素提出了对应的预防措施。同时随着地质钻探井深的不断加深,地质钻探钻柱动力学研究会变得越来越重要,这就需要地质钻探人员在充分考虑地质钻探钻柱失效影响因素的前提下,加大对地质钻探钻柱动力学的研究,以更好地保证深部地质钻探的顺利进行。     

The source of sulfur in sulfide deposits in the Siberian Platform traps (from isotope data)

The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ³⁴S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ³⁴S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ³⁴S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ³⁴S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ³⁴S = 21.6‰), in sulfate veins cutting dolomites (δ³⁴S = 33‰), and in subsidence caldera sulfates in basalts (δ³⁴S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ³⁴S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ³⁴S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ³⁴S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ³⁴S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and P_ch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

Os水吸收液ICP-MS测量信号强度衰减原因研究

蒸馏法能从样品中有效分离出OsO_4,吸收液直接用于ICP-MS测定,是辉钼矿Re-Os定年的关键技术环节。但实验发现,长时间放置的吸收液中Os信号强度显著降低。根据OsO_4化学性质推测原因在于一是挥发使吸收液Os含量减少,二是还原使+8价Os变成低价态,气态比例降低,若雾化效率不变,进入质谱仪的Os减少,两者都会导致信号降低,但具体影响情况不明,需深入研究。本文利用辉钼矿标准物质制备不同放置时间、酸度和温度的吸收液,对比上述条件对ICP-MS信号强度的影响。实验时将残余吸收液与稀释剂、氧化剂封入Carius管加热蒸馏,测定Os含量。结果表明:吸收液放置时间越长,酸度越低,温度越高,信号降幅越大,幅度达到3.2%~68.6%。室温下放置相同时间,低酸度吸收液的Os保存率高于高酸度吸收液,但Os信号强度低于后者,证明了挥发和还原共同导致信号衰减,且还原是主导原因。本文提出,冷冻(-18℃)可抑制OsO_4挥发,提高酸度(约3.5 mol/L)可减弱OsO_4还原,两者结合抑制信号衰减,提高了蒸馏法的灵活性和适用性。     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.     

免共振沉桩过程对地表振动影响的FLAC3D数值模拟

为研究免共振沉桩过程对地表振动影响,采用密度放大法以消除模型桩弹性模量过大对计算效率的影响,在有限差分软件FLAC^3D中建立了相应的连续振动沉桩模型,并和文献中的现场测试结果进行了比较,分析了激振力幅值和振动频率这两个施工参数对地表振动响应的影响。结果表明：密度放大法可有效提高数值模拟的计算效率,模拟沉桩7.0倍桩径（4.9 m）所需计算时间约为12.0 h,数值结果较好地模拟了现场测试中免共振沉桩的地表振动影响;激振力幅值和振动频率均主要对近场（水平距离为5.0倍桩径范围内）的地表振动有明显影响;临界沉桩深度与地表振动影响峰值相对应,该深度随水平距离先增大后趋于稳定;激振力幅值对临界沉桩深度的改变不明显,振动频率对远场临界沉桩深度则有较明显影响。     

温室气体排放的环境库兹涅茨曲线检验与减排路径的冲击动态——基于黑龙江省统计核算数据

基于2001-2015年黑龙江省温室气体排放统计核算数据,对地区GDP与温室气体排放的环境库兹涅茨曲线关系检验呈现倒U型,预期2019年达到理论拐点;通过偏最小二乘回归模型得到4个减排路径的年平均减排效果顺序依次为单位GDP化石能源消费量减少、经济结构调整、人均GDP增长、贸易结构变化;减排路径对应脉冲响应函数的动态冲击效果分别为波动性增排、收敛性减排、发散性减排、转变的排放作用;推动黑龙江省温室气体减排的路径顺序为控制化石能源消费量、优化经济结构、发展低碳经济、调整贸易结构。     

Flood insurance arrangements in the European Union for future flood risk under climate and socioeconomic change

Flood risk will increase in many areas around the world due to climate change and increase in economic exposure. This implies that adequate flood insurance schemes are needed to adapt to increasing flood risk and to minimise welfare losses for households in flood-prone areas. Flood insurance markets may need reform to offer sufficient and affordable financial protection and incentives for risk reduction. Here, we present the results of a study that aims to evaluate the ability of flood insurance arrangements in Europe to cope with trends in flood risk, using criteria that encompass common elements of the policy debate on flood insurance reform. We show that the average risk-based flood insurance premium could double between 2015 and 2055 in the absence of more risk reduction by households exposed to flooding. We show that part of the expected future increase in flood risk could be limited by flood insurance mechanisms that better incentivise risk reduction by policyholders, which lowers vulnerability. The affordability of flood insurance can be improved by introducing the key features of public-private partnerships (PPPs), which include public reinsurance, limited premium cross-subsidisation between low- and high-risk households, and incentives for policyholder-level risk reduction. These findings were evaluated in a comprehensive sensitivity analysis and support ongoing reforms in Europe and abroad that move towards risk-based premiums and link insurance with risk reduction, strengthen purchase requirements, and engage in multi-stakeholder partnerships.