地面三维激光扫描仪测量误差检定

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。     

变形监测技术在基坑施工中的应用

深基坑工程是地下工程施工中内容比较丰富且富有变化的领域。为了确保基坑工程施工安全顺利进行,在复杂的地质条件下进行变形监测,及时发现和预报异常现象。对有效控制基坑变形、指导施工、保证施工质量具有重要意义。     

Heterogeneous surface displacement pattern at the Hatchobaru geothermal field inferred from SAR interferometry time-series

We estimated surface displacements using persistent scatterer SAR interferometry (PS-InSAR) around the Hatchobaru geothermal field, Japan, from 18 ALOS/PALSAR images acquired from July 2007 to December 2010. Generally, geothermal fields, covered with natural targets such as rocky terrain and vegetation, have been one of the difficult targets for PS-InSAR analysis. However, we applied space adaptive filtering to increase the number of pixels for measuring surface displacement. The results of our analysis demonstrate ground subsidence with decaying velocity over the observation period around the geothermal field. The spatial pattern of ground subsidence includes sharp boundaries of subsidence that can be interpreted as fault traces. We demonstrated the usefulness of PS-InSAR analysis with the space adaptive filtering to estimate surface displacements with high spatial resolution and high spatial density around a geothermal field.     

线图形简化与移位算子的协同方法

在地图综合过程中,线的图形简化和移位算子通常是分别执行的,图形简化和移位有时都会产生新的空间冲突。本文试图把这两种算子进行协同,避免在地图综合过程中进行空间冲突的多次探测,提高地图综合数据处理的效率。本文通过把线图形简化转换为线上的点移位,并构建邻近地图目标之间的移位传播路径,在考虑空间上下文关系和地图感受规则的前提下,使移位过程能考虑到线图形简化,并尽量保持有关地图目标的空间特征。最后,以道路和其周边的建筑物群为例,验证了该算法的有效性和可行性。     

Stroke构造、移位一体化的道路网示意化方法

针对当前常用示意性地图生成方法中往往存在简化程度不够、未考虑长度信息以及时间效率低等问题,提出了stroke构造、移位一体化的道路网示意化方法。该方法在对道路网进行stroke划分构造的同时,直接对其进行渐进式的移位示意化及拓扑检查。同时本文还提出利用相似分形维数来定量比较并验证不同示意化方法的有效性。试验表明,本算法在考虑原始线形的基础上,示意化过程简单,时间效率较高,减少了拓扑冲突问题,保证了拓扑一致性及路网的均衡分布,具有较好的清晰度和认知度。     

Experimental investigation of the effects of the coverage of helical strakes on the vortex-induced vibration response of a flexible riser

The effects of different helical strake coverage on the vortex-induced vibration (VIV) of a model flexible riser were studied experimentally, with the aim of further improving the understanding of VIV responses. Uniform and linearly sheared currents were simulated to study response parameters such as non-dimensional displacement, fatigue damage, suppression efficiency, and the comprehensive evaluation is further studied. Test results of the bare model for a uniform current showed that the behavior of both the standing wave and traveling wave dominated VIV displacement. However, for a linearly sheared current, traveling wave behavior dominated VIV displacement in the high-velocity range. The results of the straked model tests indicated that the response was strongly dependent upon the amount of coverage of helical strakes. The flexible riser with 75% strake coverage gave the best comprehensive evaluation in a uniform current, and 50% strake coverage gave the best comprehensive evaluation in a linearly sheared current.     

桩锚支护深基坑施工过程变形特征分析

以济南市某大型深基坑工程为依托,通过FLAC3D对深基坑工程不同施工阶段的变形特性进行了数值计算分析;桩锚支护深基坑,地表最大竖向变行产生在距离基坑边缘10 m位置处,且最大竖向变形量为46.16 mm;最大水平位移发生在桩顶冠梁位置处,最大水平位移为53.45 mm,是基坑支护最薄弱环节,基坑呈现三角形状向内侧滑动的趋势。     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

新疆乌苏市巴音沟煤层气勘探井护壁堵漏技术

在煤层气勘探井固体岩心钻探施工过程中,遇岩层构造发育、地下水系发达的施工条件,钻进中往往发生钻井多层漏失、护壁困难的情况。因煤层气勘探井对录井工作的特殊要求,护壁堵漏工作的成功与否成为钻探施工的关键。在进行钻井护壁堵漏处理时,因技术方法不得当或未采取正确的计算经常导致护壁堵漏失败,甚至引发重大的钻探事故。通过对工区施工的经验总结,提出了切实可行的护壁堵漏技术措施,为类似地层钻井勘探施工提供借鉴。     

深部地质钻探钻柱失效行为分析

国家的“三深一土”规划确定全面开展深地探测,而在深地探测中钻柱是最重要的连接纽带,其长期在充满钻井液的井眼内工作,受力十分复杂,且受腐蚀、磨损、温度等影响,极易发生钻柱失效事故,造成重大经济损失。研究发现,振动是引起钻柱失效的主要原因,但是深部地质钻探中除了振动引起钻柱失效外,还包括钻柱质量因素、人为因素、钻井质量、套管下入因素、测斜因素以及钻井液因素引起的钻柱失效,本文针对这些影响因素提出了对应的预防措施。同时随着地质钻探井深的不断加深,地质钻探钻柱动力学研究会变得越来越重要,这就需要地质钻探人员在充分考虑地质钻探钻柱失效影响因素的前提下,加大对地质钻探钻柱动力学的研究,以更好地保证深部地质钻探的顺利进行。