测量长周期回转波动的陀螺仪法

本文阐述了回转波动的陀螺仪法。内容包括陀螺仪法的工作原理、运动方程、测量方法、测量装置及其参数。     

Experimental evidence for flexibility of a building foundation supported by concrete friction piles

This article explores the possibility to measure deformations of building foundations from measurements of ambient noise and strong motion recordings. The case under study is a seven-storey hotel building in Van Nuys, California. It has been instrumented by strong motion accelerographs, and has recorded several earthquakes, including the 1971 San Fernando (M_L=6.6, R=22 km), 1987 Whittier–Narrows (M_L=5.9, R=41 km), 1992 Landers (M_L=7.5, R=186 km), 1992 Big Bear (M_L=6.5, R=149 km), and 1994 Northridge (M_L=6.4, R=1.5 km) earthquake and its aftershocks (20 March: M_L=5.2, R=1.2 km; 6 December, 1994: M_L=4.3, R=11 km). It suffered minor structural damage in 1971 earthquake and extensive damage in 1994. Two detailed ambient vibration tests were performed following the Northridge earthquake, one before and the other one after the 20 March aftershock. These included measurements at a grid of points on the ground floor and in the parking lot surrounding the building, presented and analyzed in this article. The analysis shows that the foundation system, consisting of grade beams on friction piles, does not act as a “rigid body” but deforms during the passage of microtremor and therefore earthquake waves. For this geometrically and by design essentially symmetric building, the center of stiffness of the foundation system appears to have large eccentricity (this is seen both from the microtremor measurements and from the earthquake recordings). This eccentricity may have contributed to strong coupling of transverse and torsional responses, and to larger than expected torsional response, contributing to damage during the 1994 Northridge, earthquake.     

打桩对周围建筑物振动影响的研究与实例分析

研究了打桩过程中土层质点振动速度的监测方法,打桩振动对周围建筑物影响程度的评价标准,并结合工程实例探讨了有关因素对检测结果的影响,及施工中应采取的相应减振措施。     

A study on seismic source process in short- term and imminent stage before destructive mining shock

ｎｔｒｏｄｕｃｔｉｏｎＳｔｕｄｙｏｎｓｅｉｓｍｉｃｓｏｕｒｃｅｐｒｏｃｅｓｉｎｓｈｏｒｔｔｅｒｍａｎｄｉｍｍｉｎｅｎｔｓｔａｇｅｂｅｆｏｒｅｅａｒｔｈｑｕａｋｅｉｓａｃｏｎｃｅｒｎｅｄｐｒｏｂｌｅｍｉｎｒｅｃｅｎｔｓｅｉｓｍｏｌｏｇｉｃａｌｆｉｅｌ...     

Multiple-Step Predictive Control for Offshore Structures

—Ocean wave propagation is slow,visible and measurable,so a wave theory can be used to approxi-mately predict the imminnent wave force on an offshore structure based on measured,real-time wave elevation nearthe structure.This predictability suggests the development of a more efficient algorithm,than those that have beendeveloped for structures under wind and seismic loads,for the active vibration control of offshore structures.Thepresent study delveops a mutiple-step predictive optimal control(MPOC)algorithm that accounts for multiple-step external loading in the determibation of optimal control forces.The control efficiency of the newly developedMPOC algorithm has been investigated under both regular(single-frequency)and irregular(multiple-frequency)wave loads,and compared with that of two other well-known optimal control algorithms:classical linear optimalcontrol(CLOC)and instantaneou optimal control(IOC).     

从正反两个角度探讨摆式波力电站的吸能机制

本文主要论述了摆式波力电站的吸能机制,提出了吸能原理,从力和作功的角度探讨了吸能的实质,分析比较了几种摆板运动方程形式之间的联系和区别。给出了波能转换效率的定义,并进一步分析了波能转换效率的组成和性质。     

Designing tuned mass dampers via static output feedback: a numerical approach

The paper presents a numerical approach to the problem of determining the design parameters of a vibration absorber to minimize the effect of disturbing forces. The approach is also applicable to multi‐input systems such as civil engineering structures. The resulting devices are appealing since they can be implemented passively and are more economic and reliable than active control devices. Copyright © 2000 John Wiley & Sons, Ltd.     

Vibration of vertical rectangular plate in contact with water on one side

In this paper, the vibratory characteristics of a rectangular plate in contact with water on one side are studied. The elastic plate is considered to be a part of a vertical rectangular rigid wall in contact with water, the edges of which are elastically restrained and parallel to those of the rigid wall. The location and size of the plate on the rigid wall may vary arbitrarily. The water with a free surface is in a rectangular domain infinite in the length direction. The effects of free surface waves, compressibility of the water and the hydrostatic water pressure are neglected in the analysis. An analytical‐Ritz method is developed to analyse the interaction of the plate–water system. First of all, by using the method of separation of variables and the method of Fourier series expansion, the exact expression of the motion of water is derived in the form of integral equations including the dynamic deformation of the plate. Then the Rayleigh–Ritz approach is used to derive the eigenfrequency equation of the system via the variational principle of energy. By selecting beam vibrating functions as the admissible functions of the plate, the added virtual mass incremental (AVMI) matrices for plate vibration are obtained. The convergency studies are carried out. The effects of some parameters such as the depth and width of water, the support stiffnesses, location and aspect ratio of the plate and the plate–water size and density ratios on the eigenfrequencies of the plate–water system are investigated. Several numerical examples are given. The validity of AVMI factor approach is also confirmed by comparing the AVMI factor solutions with the analytical‐Ritz solutions. The results show that the approach presented here can also be used as excellent approximate solutions for rectangular plates in contact with water of infinite width and/or infinite depth. Copyright © 2000 John Wiley & Sons, Ltd.     

核设施一维土层地震反应分析中的参数不确定性

本文概述了一维土层地震反应分析等效线性化方法评价结果不确定性研究的进展,比较了中美两国核设施土层地震反应分析中参数不确定性的处理方法。基于实测数据,令参数随机变化,建立土层剖面模型,采用随机振动理论方法,分析了土层动力特性、剪切波速、基岩地震动输入界面对评价结果的影响。结果表明,土层剪切波速的不确定性对评价结果影响最大,主要表现为加速度反应谱平台段的延长。对比参数随机变化模型和最佳估计模型的计算结果可知,随机振动理论反映了土层对基岩地震动的影响,将随机模型分析结果的中值加减1倍标准差基本可以包络最佳估计模型的分析结果。     

伸缩缝刚度对大跨度悬索桥动力特性的影响

伸缩缝作为大跨度桥梁与引桥之间的重要连接构件,其抗推刚度及可能存在的变异性对主桥及引桥动力特性的影响不可忽略。本文建立了大跨度悬索桥及引桥的有限元模型,采用弹簧单元模拟加劲梁与引桥箱梁之间的伸缩缝,分析伸缩缝刚度对悬索桥及引桥自振特性及其地震响应的影响规律。分析结果表明:伸缩缝刚度对加劲梁的横弯振型、竖弯与纵飘耦合振型的频率有明显的影响;伸缩缝刚度的变化会导致加劲梁与引桥的振型相互耦合,同时这些振型的频率发生相应的突变,当伸缩缝刚度较大时,加劲梁两个竖弯与纵飘的耦合振型解耦成为独立的竖弯和纵飘振型;当引桥与悬索桥加劲梁的纵飘振型发生耦合时,在纵向和竖向地震作用下的悬索桥及引桥的地震响应达到最小。伸缩缝刚度对悬索桥动力特性影响的分析可为悬索桥的模态参数确认、损伤识别、抗震性能分析提供有价值的借鉴。