Evidence for the evolution of an oxygen minimum layer at the beginning of S-1 sapropel deposition in the eastern Mediterranean

The sediments of the eastern Mediterranean basin contain a series of organic-rich sapropels intercalated with organic-poor nannofossil oozes. Until recently the timing of the onset of sapropel formation was not known accurately because of the low resolution achievable by conventional radiocarbon dating. Compilation of all available ¹⁴C-AMS dates show that the base of S-1 (the most recent sapropel) was initiated 8800 years B.P. (¹⁴C age corrected by 400 years for reservoir effect) under a 500 m water column and moved progressively into deeper water reaching depths of 3500 m at 8200 years B.P. The linear correlation between the age of S-1 onset and water depth

Full-size image

suggests that formation of sapropels moved into deeper water at a rate of 1000 m/200 year. A model is suggested in which export production which sank below the well-mixed surface layers (500 m) was respired consuming dissolved oxygen in the Levantine deep water until a threshold value was reached when sapropels began to be preserved in the sediment. This resulted in a progressively deepening oxygen minimum zone with time until eventually the entire deep water in the basin was oxygen depleted. Assuming that the threshold value for sapropel formation was complete anoxia, it was calculated that primary productivity in the basin during the deposition of S-1 was a factor of 5 greater than that found at present.     

Accelerated relative sea-level rise and rapid coastal erosion:: testing a causal relationship for the Louisiana barrier islands

The role of relative sea-level rise as a cause for the rapid erosion of Louisiana's barrier island coast is investigated through a numerical implementation of a modified Bruun rule that accounts for the low percentage of sand-sized sediment in the eroding Louisiana shoreface. Shore-normal profiles from 150 km of coastline west of the Mississippi delta are derived from bathymetric surveys conducted during the 1880s, 1930s and 1980s. An RMS difference criterion is employed to test whether an equilibrium profile form is maintained between survey years. Only about half the studied profiles meet the equilibrium criterion; this represents a significant limitation on the potential applicability of the Bruun rule. The profiles meeting the equilibrium criterion, along with measured rates of relative sea-level rise, are used to hindcast shoreline retreat rates at 37 locations within the study area. Modeled and observed shoreline retreat rates show no significant correlation. Thus, in terms of the Bruun approach, relative sea-level rise has no power for hindcasting (and presumably forecasting) rates of coastal erosion for the Louisiana barrier islands.     

航空重力测量数学模型及其测量精度分析

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。     

数字管网连通分析的淘汰算法与实现

本文从图论的观点出发,分析了数字化市政管网的构成和连通的特点,探索出数字化管网线路连通性分析的规律,提出了逐步淘汰算法进行连通性分析的方法。给出了基于mapbsic的实现这种算法的关键语句和注意问题。     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

区域似大地水准面确定的最小二乘支持向量机方法

支持向量机(SVM)是近年来发展起来的机器学习的新方法,它较好地解决小样本、非线性、高维数、局部极小点等实际问题.文中研究支持向量机的拓展算法--最小二乘支持向量机(LSSVM),并将其应用于确定大面积复杂似大地水准面.通过工程实例并与神经网络模型和二次曲面多项式拟合模型相比较,验证确定区域似大地水准面的LSSVM方法的有效性.     

球面线要素的多分辨率实时简化方法

在分析球面3维数据可视化特点的基础上,提出了视点相关的球面矢量数据LOD简化方法,基本原理是：以视点为基础在屏幕空间获取投影误差,反投影到模型空间得到动态简化阈值,并结合Douglas—Peucker算法,对矢量数据进行多分辨率实时简化表达。最后,开发实验系统并对相关方法进行了验证。结果表明：在不影响球面图形可视化效果下,数据量减少了约4-5倍,有效地提高了图形渲染速度和效率。     

Modelling Positional Uncertainty of Line Features by Accounting for Stochastic Deviations from Straight Line Segments

The assessment of positional uncertainty in line and area features is often based on uncertainty in the coordinates of their elementary vertices which are assumed to be connected by straight lines. Such an approach disregards uncertainty caused by sampling and approximation of a curvilinear feature by a sequence of straight line segments. In this article, a method is proposed that also allows for the latter type of uncertainty by modelling random rectangular deviations from the conventional straight line segments. Using the model on a dense network of sub‐vertices, the contribution of uncertainty due to approximation is emphasised; the sampling effect can be assessed by applying it on a small set of randomly inserted sub‐vertices. A case study demonstrates a feasible way of parameterisation based on assumptions of joint normal distributions for positional errors of the vertices and the rectangular deviations and a uniform distribution of missed sub‐vertices along line segments. Depending on the magnitudes of the different sources of uncertainty, not accounting for potential deviations from straight line segments may drastically underestimate the positional uncertainty of line features.     

动态最小二乘支持向量机学习算法

针对大样本集的训练问题和动态训练样本的模型更新问题,提出了动态最小二乘支持向量机学习算法.该算法充分利用已建好的模型,逐渐加入新样本,并可删除位于任何位置的非支持向量,避免了矩阵求逆运算,保证了算法的高效率.大坝变形及电离层延迟两个时间序列的预报实例表明,该算法具有计算时间短、预报精度高的特点.     

Intrinsic sample methods for mineral exploration and resource assessment

We report on an objective methodology, referred to as intrinsic sample methodology, for the delineation of exploration target areas or resource areas for assessment. Important features of the methodology include (1) identification of recognition criteria for critical genetic factors, (2) synthesis of new variables from enhanced geodata, (3) estimation of logit probability models, and (4) cutting of estimated logit probabilities to delineate exploration targets or resource areas. The methodology is demonstrated on the Walker Lake quadrangle of Nevada and California.