微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。     

理学3080E3型X射线荧光光谱仪维修实例

介绍理学3080E3型X射线荧光光谱仪样品驱动单元及高压发生器部分的故障现象及维修实例。     

地面综合物探方法在浅覆盖区地质填图单元的划分研究

由于浅覆盖区的特殊地貌，给区域地质填图带来一定的困难。本文依据不同岩性的磁化率和放射性元素含量差异，讨论了不同填图单元地面磁法测量与地面伽玛能谱测量曲线关系。通过实测剖面的分析，得到大兴安岭火成岩区不同填图单元磁测异常曲线与放射性异常曲线的相关关系，从而用来快速确定浅覆盖区下填图单元边界，以减少槽探工程，减轻地质人员的工作强度。     

多源遥感技术在汝箕沟煤田火区动态监测中的应用

以高空间分辨率的Quickbird卫星图像和高光谱分辨率的OMIS Ⅰ航空高光谱图像数据为信息源,结合细分光谱仪、红外测温计等地面遥感技术,对宁夏汝箕沟煤田的煤火现状进行了定量调查分析及动态监测,查明了煤田煤火的范围、强度,分析了不同时期煤田火区的变化规律,评价了火区治理效果并对后续灭火工作提出建议,为火区治理提供了决策依据.     

煤矿采区三维地震资料解释中的切片技术及其应用

长期以来,煤矿采区三维地震勘探资料解释的工作流程与二维地震勘探基本相同,三维地震资料相对二维地震资料所具有的许多解释方面的优越性未能有效发挥出来,人机联作的过程相对简单.在三维地震勘探获取的三维数据体基础上,可做进一步的运算和分析,提取速度、振幅、频率、相位等相关信息,并利用等时切片、层拉平切片、断层切片、面块切片、方差体、相干体等各种技术,有效解释小构造、小褶曲及岩性方面的信息.     

北京夏季城市热岛现状及楔形绿地规划对缓解城市热岛的作用

通过遥感技术与地面测定相结合的方法，对北京城市热岛现状作观测研究，得到北京城市地面的温度分布特点。使用北京大学城市边界层模式从气象观点就“楔形绿地”规划对北京城市气候的影响进行研究和评价，模式通过对城市地表复杂性和多样性的特征进行细致描述，建立了一个细致模拟城市特点的城市边界层能量平衡模式，并用此能量平衡模式得到的地面温度作为下边界条件，中尺度气象模式MM5做初始场和侧边界条件，建立一个最小分辨率为500 m的城市边界层模式系统，来研究城市边界层在中尺度背景场作用下的精细结构。通过个例模拟，模式能够较准确地模拟城市边界层的风温场分布情况，可以用来对楔形绿地规划进行模拟试验。通过对规划后的气象场在特定的气象条件下进行模拟，结果显示，建造大型的楔形绿地后，绿地区域及绿地周围约1 km以内的地区温度有所降低，降低的程度由规划前后的地表类型改变的剧烈程度、风速大小及与绿地的距离决定，但是这种规划方案却会因城市的下风方向的风速减小而导致通风不畅。     

中尺度模式中的边界层特征量分析

在中尺度数值天气预报模式MM4中，用level3及E-ε-l两种湍流闭合方法对原总体边界层参数化方案进行改进，使得中尺度模式中可以直接输出有关湍流量，并对地表通量参数化方案进行改进，进而对不同下势需如沙漠，植被上的有关湍流量和边界层特征量进行分析。研究中尺度系统中边界层结构的特征，本文主要从地表通量，湍流交换系数，湍流动能（q^2)，温度脉动方差（θ^2)及风温廓线等几个方面进行研究，结果表明，新方案能更好地反映边界层特征。     

改进的切线性模式对一个边界层模式变分资料同化的改善

大气、海洋中边界层物理过程的强非线性会对切线性模式近似（尤其是当积分时间长时）有较大的影响，从而给相应的4维变分资料同化问题的求解造成困难。本构造了Mellor-Yamada湍流封闭模式（level 2.5)的一个改进的切线性模式，相比通常的切线性模式和简化的切线性模式可以提高对非线性扰动的逼近。利用这个改进的切线性模式的伴随模式分别进行了1到7天的变分资料同化试验，得到了满意的结果。而用通常的伴随模式和简化的伴随模式都无法得到令人满意的结果。     

Observations Of Nocturnal Drainage Flow In A Shallow Gully

The formation of cold air drainage flows in a shallow gully is studied during CASES-99 (Cooperative Atmosphere-Surface Exchange Study). Fast and slow response wind and temperature measurements were obtained on an instrumented 10-m tower located in the gully and from a network of thermistors and two-dimensional sonic anemometers, situated across the gully. Gully flow formed on clear nights even with significant synoptic flow. Large variations in surface temperature developed within an hour after sunset and in situ cooling was the dominant factor in wind sheltered locations. The depth of the drainage flow and the height of the down-gully wind speed maximum were found to be largest when the external wind speed above the gully flow is less than 2 m s^-1. The shallow drainage current is restricted to a depth of a few metres, and is deepest when the stratification is stronger and the external flow is weaker. During the night the drainage flow breaks down, sometimes on several occasions, due to intermittent turbulence and downward fluxes of heat and momentum. The near surface temperature may increase by 6 ° C in less than 30 min due to the vertical convergence of downward heat flux. The mixing events are related to acceleration of the flow above the gully flow and decreased Richardson number. These warming events also lead to warming of the near surface soil and reduction of the upward soil heat flux. To examine the relative importance of different physical mechanisms that could contribute to the rapid warming, and to characterize the turbulence generated during the intermittent turbulent periods, the sensible heat budget is analyzed and the behaviour of different turbulent parameters is discussed.     

Atmospheric Surface-Layer Processes During the Total Solar Eclipse Of 11 August 1999

The central path of the total solar eclipse (TSE) of 11 August 1999 mostly passedthrough a region of active monsoon in India, with the eclipse ending around localsunset. Measurements in the surface layer (SL) were carried out close to the eclipseaxis at Akola (20°42' N, 77°2' E) in central India. The globalradiation flux reaching the surface vanishes around totality at 1803:24 (LT), followedby a small recovery before again dipping to zero at sunset. The temperatures in the SL, and subsoil at 50-mm depth, show a local minimum with a lag of about 10 min after the second contact, whereas the lag appears to vanish when the temperature series is detrended. The SL exhibits near-neutral, though generally stable, conditions from about 1500 hr itself due to heavy cloud cover followed by the eclipse-induced cooling of the surface. The wind component across the eclipse axis vanishes at totality, the wind vector aligning with the azimuth of the traversing moon shadow. The deceleration of the mean flow can be due to the combined effect of the colder surface and downward heat flux, where the locally altered horizontal temperature gradients may cause, as in this instance, the cessation of the cross flow.The oscillations in temperature and wind that show significant peaks, around 90–100 min as well as the semi-period of the eclipse near 60 min, persist for several hours past the eclipse event. A fresh analysis of the published data on the TSE of 7 March 1970 shows spectral peaks in the temperature nearly coincident with those already reported from the surface pressure records. The oscillations in the SL fields during the two TSE events are very similar implying that the source mechanism is also likely to be the same in both the cases.