Numerical simulation research on multi-electrodes resistivity imaging survey array

Multi-electrodes Resistivity Imaging Survey （MRIS） is an array method of electrical survey. In practice how to choose a reasonable array is the key to get reliable survey results. Based on four methods of MRIS such as Wenner, Schlumberger, Pole-pole and Dipole-dipole the authors established the model, by studying the result of the forward numerical simulation modeling and inverse modeling, and analyzed the differences among the different forms of detection devices.     

超声波对湛江等鞭金藻生长和脂肪酸组成的影响

设计了一个超声频率、超声功率和处理时间三因素四水平的正交实验,研究了超声波对湛江等鞭金藻的生物学效应.实验结果表明,超声频率对湛江等鞭金藻的生物学效应显著,而超声功率和处理时间的影响相对较小.对于提高湛江等鞭金藻生长速率常数,最佳超声条件为20kHz,6W,10s3次;对于提高其脂肪酸不饱和度和主要不饱和脂肪酸百分比,最佳超声条件为20kHz,4～6W,30s.在最佳超声条件下,湛江等鞭金藻生长速率常数最高可达0.630d,是对照组的2.02倍,其脂肪酸不饱和度最高可达79.6%,比对照组提高7.8%,其中主要不饱和脂肪酸的百分含量均得到不同程度的提高.     

中分辨率成像光谱仪数据的滩涂环境遥感应用能力研究

以长江口海岸带地区为示范区，探讨了我国中分辨率成像光谱仪(CMODIS)的滩涂及水体图像特征。结合地面现场观测和图像处理结果，评价了其在滩涂环境遥感中的应用能力。     

洱源-江川宽角地震剖面的地壳反射特征

通过对洱源-江川宽角反射地震资料的叠前偏移处理成像,得到了一个类似于近垂直入射多道地震数据的记录剖面.反射剖面图像与地壳速度结构共同揭示出地壳厚度由剖面西北端(约45 km)向东南端(约40 km)减薄.在洱源-楚雄西北附近深度约10 km处存在一组向东南倾斜的强反射震相,其东南约50 km处存在向西北倾斜的强射震相.易门断裂两侧地壳反射属性具有明显的差异,易门断裂之西北方向深度25～40 km处,中下地壳内存在两组强振幅,向东南方向上倾的地震反射同相轴,并被楚雄-建水断裂后期所错断,易门断裂之东南方向上,地壳内反射较为均一,未见特别明显的强间断面反射信息,这个反射结构被解释为印度板块东向俯冲与藏东缘地壳物质东向逃逸综合作用导致下地壳增厚和厚地壳变形的结果.     

瞬变电磁法拟地震成像研究进展

瞬变电磁法是工程地球物理勘察中应用较多的一种勘探方法之一,瞬变电磁法拟地震成像方法研究是当前电磁探测理论与应用研究的热门.文中详细叙述了瞬变电磁法拟地震成像的两种不同思路,一种是建立时间—频率转换经验公式,把TEM数据转换成平面波数据,借鉴大地电磁法拟地震解释思路进行成像,另一种是通过积分变换,把扩散场变成虚拟波场,把电磁衰减信号变成拟地震子波,然后按照地震解释法进行解释,并分析了各自存在的的问题.指出下一步研究的方向.     

Research on the Application of Fast-steering Mirror in Stellar Interferometers

In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt.     

折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

地震-电成像联合探测试验——以淄博市活断层探测为例

在城市浅部活断层探测中,地震和电成像是2种主要的地球物理勘探手段。它们既可独立开展工作,也可在地质构造复杂地段进行联合探测,以更合理地解释探测区域的地质构造。文中利用电阻率和地震纵波速度之间的简单关系,进行了地震-电成像联合反演的初步探索。结果表明,通过参考电成像图像的电阻率分布,可获得合理的准二维地震波叠加速度模型,最终获得探测区域合理的地震时/深剖面,深化对地质构造的认识和提供合理的解释     

Rockburst research at Falconbridge's Strathcona Mine,Sudbury, Canada

Microseismic systems at five mines in the Sudbury Basin provide the basic data for Falconbridge Limited's rockburst research. Daily and long-term analysis of this data as well as underground observations have confirmed the fault-slip mechanism at three mines. A detailed analysis of the complete history of Falconbridge Mine is being conducted and Distinct Element numerical models are being used to simulate both the stick-slip behaviour of faults and the dynamic effects of the induced vibrations on rock and backfill. University research includes acoustic tomographic imaging of the rock mass based on seismic wave propagation and collection of full microseismic waveforms to allow application of advanced seismic and statistical analysis techniques.Formerly with Mines Technical Services, Falconbridge Limited, Sudbury Operations, Falconbridge , Ont., P0M 1S0.Presented at the Fred Leighton Memorial Workshop on Mining Induced Seismicity, Montreal, Canada, August 30, 1987.