山岭隧道工程综合地质勘察方法探讨

山岭隧道工程具有隐蔽性、施工复杂性、地层条件和周围环境不确定性等特点,采用科学的勘察方法,是查明隧道岩土体工程地质条件的有效手段。本文以海淀区西山隧道为依托,针对隧道工程勘察中的关键地质问题,运用工程地质测绘、钻探、工程物探、水文地质勘查等综合勘察方法,有效地查明隧址区的地质构造、岩土体结构和地下水分布特征,全面、客观地评价隧道进出口段边坡及仰坡稳定性、隧道围岩质量与稳定性、隧道涌水量、地应力及有害气体等工程地质问题,并针对不良地质现象提出防治对策,以期为工期紧张、地形困难且日趋增多的山岭隧道工程地质勘察,提供可以借鉴的模式和方法。     

Large scale three-dimensional seepage analysis model test and numerical simulation research on undersea tunnel

During the construction process of Qingdao Jiaozhou Bay Undersea Tunnel, the faults and other unfavorable geological discontinuities were often encountered. To study the water inrush mechanism in the faults, both physical model test and numerical analysis were carried out. The results of crown displacement and hydraulic pressure of the monitoring sections in the physical model and numerical model were analyzed in this paper. It was found that the displacement and hydraulic pressure in the process of tunnel construction are often interacted as both cause and effect, and the lower of hydraulic pressure is often accompanied with the growth of its displacement. The changing of the excavation disturbed zone during the excavation in the undersea tunnel was also studied. The results show that the excavation disturbed zone in fault is larger than that in surrounding rock mass, and the excavation disturbance effects in the filling type fault are both transient and persistent. When the displacement and hydraulic pressure in the undersea tunnel change sharply during excavation, there are relatively slow and continuous change trend of the displacement and hydraulic pressure. For practical purposes, to prevent water inrush in the undersea tunnel, more attentions should also be paid to the undersea tunnel after excavation.     

A synthetic aperture radar sea surface distribution estimation by n-order Bézier curve and its application in ship detection

To dates,most ship detection approaches for single-pol synthetic aperture radar(SAR) imagery try to ensure a constant false-alarm rate(CFAR).A high performance ship detector relies on two key components:an accurate estimation to a sea surface distribution and a fine designed CFAR algorithm.First,a novel nonparametric sea surface distribution estimation method is developed based on n-order Bézier curve.To estimate the sea surface distribution using n-order Bézier curve,an explicit analytical solution is derived based on a least square optimization,and the optimal selection also is presented to two essential parameters,the order n of Bézier curve and the number m of sample points.Next,to validate the ship detection performance of the estimated sea surface distribution,the estimated sea surface distribution by n-order Bézier curve is combined with a cell averaging CFAR(CA-CFAR).To eliminate the possible interfering ship targets in background window,an improved automatic censoring method is applied.Comprehensive experiments prove that in terms of sea surface estimation performance,the proposed method is as good as a traditional nonparametric Parzen window kernel method,and in most cases,outperforms two widely used parametric methods,K and G0 models.In terms of computation speed,a major advantage of the proposed estimation method is the time consuming only depended on the number m of sample points while independent of imagery size,which makes it can achieve a significant speed improvement to the Parzen window kernel method,and in some cases,it is even faster than two parametric methods.In terms of ship detection performance,the experiments show that the ship detector which constructed by the proposed sea surface distribution model and the given CA-CFAR algorithm has wide adaptability to different SAR sensors,resolutions and sea surface homogeneities and obtains a leading performance on the test dataset.     

Seismic attenuation estimation using a complete ensemble empirical mode decomposition-based method

The frequency attenuation gradient method can provide important information for hydrocarbon detection. In this paper, a method using Complete Ensemble Empirical Mode Decomposition (CEEMD), Hilbert transform and the least-squares curve-fitting is proposed for seismic attenuation estimation as an effective frequency attenuation gradient estimation approach. We first use CEEMD to obtain the different Intrinsic Mode Functions (IMFs), which have a narrow band and can enhance the physical meaning of instantaneous attributes trace by trace. The time-frequency spectrum, which is computed using a Hilbert transform of each IMF, is represented as a spectrum with a single-peak that has narrow side lobes, which is conducive to frequency attenuation gradient estimation. Second, for each time sample, the frequency-amplitude spectrum of each IMF trace is extracted from the time-frequency spectrum to conduct the attenuation gradient computation. Then, the logarithm operation is performed for each IMF trace. Due to the very narrow bands of some IMFs in some seismic traces, a variable frequency window is adopted along the IMF trace according to the local data characteristics. Finally, the attenuation gradient for each IMF in a seismic trace can be computed using least-squares fitting. A different IMF reflects a seismic trace with a different spatiotemporal scale and can highlight different geologic and stratigraphic information. The correlation weighted average operation is used to highlight some useful details in seismic trace and obtains the attenuation gradient for each seismic trace. Field data examples demonstrate our method and its effectiveness. The proposed method can stably estimate the frequency attenuation gradient.     

高频地波雷达海杂波背景下的船只目标检测研究进展

针对海杂波对高频地波雷达目标检测的干扰问题,分目标处于海杂波谱区之内和之外两种情况综述了海杂波背景下的目标检测方法。对于海杂波内目标检测的难题,介绍了一种基于现场海态同步观测信息的检测新思路以及初步验证结果。对国内外相关研究进展的归纳总结和新思路的提出,为提出更加有效的海杂波干扰下的目标检测方法提供了重要的参考。     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

软岩隧道中双层初期支护的应力情况分析

两水隧道穿越的地层主要岩性为炭质千枚岩,地质情况较差,围岩破碎度高,节理发育。自2009年两水隧道开工建设以来,隧道工程问题层出不穷,出现了初期支护开裂、破坏,甚至出现二衬开裂、掉块,仰拱隆起等严重的隧道结构破坏现象,施工进度缓慢。在进口桩号为DK359+712～ DK359+742段采用双层初期支护和单层二次衬砌的支护方式,取得了良好的效果。通过应力情况分析为炭质千枚岩隧道的支护选型提供了依据。     

元素分析仪-同位素比值质谱测量碳氮同位素比值最佳反应温度和进样量的确定

沉积有机质的碳氮稳定同位素值是进行古气候、古环境及生态系统研究不可或缺的主要研究手段,目前碳氮同位素主要利用元素分析仪-同位素比值质谱(EA-IRMS)系统来测定。EA-IRMS测定过程中的反应温度及样品进样量直接影响反应物在测试中的燃烧程度,从而影响测试数据的精度。本文利用EA-IRMS技术,以标准样品为参考,在不同转化温度下测试碳氮同位素值,研究保证测试精度的最佳反应温度条件;同时,通过分析不同含氮量样品的检测限,明确了样品含氮量与最低检测限之间的关系,确定了精确测定氮同位素值的最低进样量。结果表明:反应温度对测试精度有显著影响,在碳同位素测定时,将反应温度设定为900℃或以上时测试精度均能达到±0.2‰;氮同位素测定时,反应温度须设定为950℃时测试精度才能达到±0.3‰。实验得出样品含氮量与检测限之间的线性相关性为R2=0.873,开展氮同位素测定时可根据此关系来判断和控制进样量。     

地质雷达电磁干扰分析及在隧洞岩溶探测中的应用

将地质雷达用于千岛湖配水工程某隧洞岩溶探测,分析了倾斜状电磁干扰异常与溶洞雷达异常差异,通过雷达剖面及疑似异常区单道时间-频率谱的分析,推断了隧底岩溶的性质及空间分布特征,含水溶洞在雷达剖面反映为同相轴错断,强振幅及能量高衰减的特性,高频干扰波振幅幅值较异常区小且能量不满足随时间推移逐渐衰减的规律,雷达成果为隧洞安全施工提供了准确的参考。      

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.