A Research on the Algorithm of Local Atomic Time

The goal of all time laboratories’ pursue is to produce and keep a stable, precise and reliable time scale. The long-term stability of the time scale is mainly taken into account in the traditional ALGOS algorithm, while the local atomic time scale should give consideration to both the long-term and shortterm stabilities. From the analysis and research on the atomic clock noise model and under the condition that the long-term stability of the local atomic time scale does not drop, a complete algorithm is proposed which is suitable for the calculation of the local time scale TA (NTSC) carried out at the time laboratory with the time-keeping clocks of a unitary type and being close in performance at the National Time Service Center, called the NTSC for short, of Chinese Academy of Sciences. The data of all the clocks in the NTSC which participated in the calculation of the International Atomic Time (TAI) all the year round in 2008 are applied to the test and verification of the new algorithm, with the result showing that both the short- and long-term stability indexes of the obtained TA (NTSC) are improved. The research result is suitable for the calculation of the atomic time scale of the time laboratory whose time keeping system is similar to that of the NTSC.     

Microsporidan parasite Thelohania contejeani Henneguy from New Zealand freshwater crayfish

The sporozoan Thelohania contejeani Henneguy (Microsporida: Nosematidae) is recorded from Paranephrops zealandicus (White) for the first time. It is an intracellular parasite invading musculature throughout the crayfish, causing a gradual decrease in locomotor activity, and it may eventually cause the death of the host. Infected crayfish were found in the northern part of Leith Stream, Dunedin, where the infection rate reached a maximum of 20%. This parasite has formerly been recorded only from Northern Europe.     

Altimeter Signal-to-Noise for Deep Ocean Processes in Operational Systems

The ocean signal for this study is the sea surface height due to the slowly varying (greater than 5-day) ocean processes, which are predominantly the deep ocean mesoscale. These processes are the focus of present assimilation systems for monitoring and predicting ocean circulation due to ocean fronts and eddies and the associated environmental changes that impact real time activities in areas with depths greater than about 200 m. By this definition, signal-to-noise may be estimated directly from altimeter data sets through a crossover point analysis. The RMS variability in crossover differences is due to instrument noise, errors in environmental corrections to the satellite observation, and short time period oceanic variations. The signal-to-noise ratio indicates that shallow areas are typically not well observed due to the high frequency fluctuations. Many deep ocean areas also contain significant high frequency variability such as the subpolar latitudes, which have large atmospheric pressure systems moving through, and these in turn generate large errors in the inverse barometer correction. Understanding the spatial variations of signal to noise is a necessary prerequisite for correct assimilation of the data into operational systems.     

Numerical Modeling of Sediment Mass Sliding and Tsunami Generation: The Case of February 7, 1963, in Corinth Gulf,Greece

Numerical modeling of a landslide process at the continental slope by taking into account slope parameters is performed for the tsunami event of February 7, 1963, reported in the Corinth Gulf, central Greece. A layered sediment structure was considered, and an initial external dynamic action at the landslide process was introduced. The results obtained were quite consistent with the observational runup data as well as with the results arrived at by conventional rigid-body and viscous-fluid models. However, this approach permits to describe in detail the formation of several wave groups and particular tsunami characteristics that are strongly dependent on the landslide model.     

Tsunami Inundation Modeling and Mapping using ALTM- and CARTOSAT-Derived Coastal Topographic Data

Coastal topography is the principal variable that affects the movement of the tsunami wave on land. Therefore, land surface elevation data are critical to a tsunami model for computing extent of inundation. Elevation data from India's remote sensing satellite CARTOSAT-1 are available for the entire Indian coastline, while elevation data collected using Airborne Laser Terrain Mapper (ALTM) are only available for selected sections of the coastline. This study was carried out to evaluate the suitability of CARTOSAT-1 and ALTM elevation data sets in the tsunami inundation modeling. Two areas of the coastal Tamil Nadu that were severely affected during the December 2004 tsunami and surveyed extensively for mapping the extent of inundation were selected as the study areas. Elevation data sets from ALTM, CARTOSAT-1 and field measurement collected using Real-time Kinematic GPS (RTK-GPS) were compared for these areas. The accuracy of ALTM and CARTOSAT-1 data, the significance of interpolation methods and data used on model outputs were studied. The analysis clearly revealed that the elevation accuracy of CARTOSAT-1 data (+/?2m) was much lower than ALTM data (+/?0.6m). However, it was found that despite the differing elevation accuracy, both ALTM and CARTOSAT-1 can be used to produce tsunami inundation maps for open coasts with an accuracy of 185 m (2 grid cells) at 75% and 50% confidence level, respectively.     

Near-Real–Time GPS-Based Orbit Determination and Sea Surface Height Observations from the Jason-1 Mission Special Issue: Jason-1 Calibration/Validation

The Jason-1 Operational Sensor Data Record (OSDR) is intended as a wind and wave product that is aimed towards near-real–time (NRT) meteorological applications. However, the OSDR provides most of the information that is required to determine altimetric sea surface heights in NRT. The exceptions include a sufficiently accurate orbit altitude, and pressure fields to determine the dry troposphere path delay correction. An orbit altitude field is provided on the OSDR but has accuracies that range between 8–25 cm (RMS). However, tracking data from the on-board BlackJack GPS receiver are available with sufficiently short latency for use in the computation of NRT GPS-based orbit solutions. The orbit altitudes from these NRT orbit solutions have typical accuracies of < 3.0 cm (RMS) with a latency of 1–3 h, and < 2.5 cm (RMS) with a latency of 3–5 h. Meanwhile, forecast global pressure fields from the National Center for Environmental Prediction (NCEP) are available for the NRT computation of the dry troposphere correction. In combination, the Jason-1 OSDR, the NRT GPS-based orbit solutions, and the NCEP pressure fields can be used to compute sea surface height observations from the Jason-1 mission with typical latencies of 3–5 h, and have differences with those from the 2–3 day latency Interim Geophysical Data Records of < 5 cm (RMS). The NRT altimetric sea surface height observations are potentially of benefit to forecasting, tactical oceanography, and natural hazard monitoring.     

Positioning requirements for the tsunami warning system

Abstract

Canada has increased the number of tsunami warning stations on the Pacific Coast from two to three. The last gauge was installed at the north end of Vancouver Island, thereby filling a large gap previously existing and providing full coverage along the coast. The record of gauges at two of the three locations is accessible either by telephone or by means of meteor burst communication, alleviating the difficulties experienced during the tsunami threat of May 6, 1986, when telephone communications were disrupted by heavy use. The gauge at Langara Island will be relocated in a more accessible and also a more tsunami‐responsive location at Rennell Sound in the Queen Charlotte Islands. All tsunami gauges also serve as tide gauges, recording the water level every 15 min. In the event of a tsunami, the recording interval can be altered to every 60 s. Suggestions have been made that Canada attempt deep‐sea recording of tsunamis off its Pacific Coast. Although this would be of great scientific value, no such program is contemplated at this time.     

Reproductive biology of horse mackerel Trachurus capensis and Trachurus trecae in Namibia and Angola

Harvest control measures for Namibia and Angola are defined using reference points for spawning biomass, which requires knowledge of spawning potential and dynamics of fishery stocks. The reproductive biology of two species of horse mackerel, Trachurus capensis and Trachurus trecae, in these waters was investigated for spawning distribution in time and space. Samples were collected during two scientific cruises conducted in February and July/August 2007 off the coast of Namibia and Angola. A total of 396 fish ovaries was examined to determine the spawning dynamics of the two species. The ovaries were histologically analysed and their oocyte distributions mapped. The length (TL)–weight relationships of the two species differed significantly. The observed development of oocyte recruitment and absence of a hiatus in the oocyte distribution indicated that these species are indeterminate spawners. Analyses of the data from the NatMIRC database (2001–2004) indicated annual changes in gonadosomatic index (GSI) for T. capensis at different latitudes, but these changes were small. GSI also fluctuated between years and areas, but there were no clear spatial or temporal trends, with averages ≤4.0% at all stations. The GSI of both species was not indicative of the histologically determined development of gonad maturity. Oocyte maturation for T. capensis indicated that smaller and younger fish spawn first. Batch fecundity (F) for T. trecae was best described by F = 4 986 TL (cm) – 99 645 (r ² = 0.83). This study provided the first analyses of oocyte development in time and space for the two species in the region.     

Behaviour of hatchery‐reared and wild‐caught 4th and 5th stage American lobsters,Homarus americanus

Behavioural deficiencies in 4th and 5th stage hatchery‐reared lobsters were examined using time budget analysis and predator trials. Hatchery‐reared 4th stage lobsters were found to behave differently than wild‐caught lobsters and differences existed between hatchery‐reared lobsters from different sources. Local hatchery‐reared 4th stage lobsters spent less time on shelter and suffered higher predator rates in laboratory trials than both wild‐caught 4th stage and lobsters reared in a hatchery in Maine. Fifth stage hatchery‐reared lobsters spent significantly more time in shelter than their wild‐caught counterparts. These differences may be attributable to the lack of development of proper predator‐avoidance behaviour and need to be understood and corrected to maximise the effect of enhancement projects.     

岩墙厚度对成矿作用的约束:以石湖金矿为例

根据透岩浆流体成矿理论,岩浆体是含矿流体的通道而不是来源,因而估算含矿流体注入岩浆体的能力是评价高位侵入体成矿潜力的有效方法。文中利用一维传热模型计算了石湖金矿区三类代表性岩墙(花岗斑岩、石英闪长玢岩和辉绿岩)不同厚度条件下的冷却时间尺度,同时估算了岩浆冷却过程中的粘度变化速率。假定岩浆侵位于约6 km,且完全固结时含矿流体才不能有效注入,石湖金矿区三类代表性岩墙的最小临界成矿厚度分别为3345 m(花岗斑岩)、822 m(石英闪长玢岩)和102 m(辉绿岩)。模拟结果与石湖金矿区矿体的产状一致,暗示模拟结果具有较强的实用价值。结合岩墙长度/宽度比值,进一步估算致矿侵入体的最小临界出露面积分别约为312～1 561 m2(玄武质岩体)、0014～0068 km2(石英闪长玢岩)和0011～0034 km2(花岗斑岩)。估算结果为野外地质找矿提供了一个定性的标准,对快速资源勘查具有参考价值。