钢筋混凝土建筑结构的抗地震破坏倒塌能力评估研究

在地震作用下钢筋混凝土建筑结构出现破坏倒塌为地震灾害中的关键,有效评估建筑结构抗地震破坏倒塌能力是建筑结构设计的前提,也是当前建筑结构提高抗震性能与加固的依据。提出变形指标极值、失效判断标准以及钢筋混凝土建筑结构倒塌极限状态判断标准,据此获取倒塌储备系数、倒塌易损性、结构整体超强系数、结构整体延性系数等评估标准。采用Pushover分析法选择相应地震波。依据梁柱线刚比对建筑结构抗倒塌能力的影响,以及柱端弯矩增加系数对建筑结构抗地震破坏倒塌能力的影响,对建筑结构易损性进行分析。结果表明:等跨建筑结构抗地震破坏倒塌能力更强;建筑结构底层是薄弱层,COF值越高,结构越容易倒塌。     

Modeling RC column flexural failure modes under intensive seismic loading

The aim of this work is to model beam‐column behavior in a computationally effective manner, revealing reliably the overall response of reinforced concrete members subjected to intensive seismic loading. In this respect, plasticity and damage are considered in the predominant longitudinal direction, allowing for fiber finite element modeling, while in addition the effect of inelastic buckling of longitudinal rebars, which becomes essential at later stages of intensive cyclic loading, is incorporated. Α smooth plasticity‐damage model is developed for concrete, accounting for unilateral compressive and tensile behavior, nonlinear unloading and crack closure phenomena. This is used to address concrete core crushing and spalling, which triggers the inelastic buckling of longitudinal rebars. For this reason, a uniaxial local stress‐strain constitutive relation for steel rebars is developed, which is based on a combined nonlinear kinematic and isotropic hardening law. The proposed constitutive model is validated on the basis of existing experimental data and the formulation of the buckling model for a single rebar is developed. The cross section of rebar is discretized into fibers, each one following the derived stress‐strain uniaxial law. The buckling curve is determined analytically, while equilibrium is imposed at the deformed configuration. The proposed models for concrete and rebars are embedded into a properly adjusted fiber beam‐column element of reinforced concrete members and the proposed formulation is verified with existing experimental data under intensive cyclic loading.     

典型砖木结构农居地震弹塑性有限元分析

针对我国农居结构中比例最高的砖木结构,选取典型结构运用ABAQUS有限元软件进行模态和地震时程弹塑性分析。给出M0.5和M5两种砌筑强度砖木结构农居的前三阶特征周期和振型,并与经验周期公式值进行对比分析,提出后者存在的问题和修改建议。选取天津波作为地震动时程输入,分别计算不同峰值加速度下两种砖木结构农居弹塑性地震反应,给出相应的拉损伤云图,并对结构的破坏特征进行分析,给出结构抗震薄弱部位。结果表明,砌筑强度是决定结构抗震能力的关键因素之一。     

基于多项式拟合均匀荷载面曲率曲线的结构损伤识别方法

为仅利用结构损伤状态的柔度矩阵对结构进行损伤程度识别,先对损伤状态的均匀荷载面曲率曲线进行最小二乘法拟合。根据曲率曲线差判断结构的损伤位置,对损伤位置的点进行剔除后,再利用未损伤位置上的点进行局部最小二乘法拟合,代替损伤前的均匀荷载面曲率曲线,用于结构的损伤定位与定量。通过一简支梁数值算例,先以理论的二次多项式进行拟合,考虑单损伤和多损伤的情况,进行损伤识别分析,再分析多项式次数、测点数目以及不同噪声水平对损伤定量精度的影响。结果表明:在一定范围内,次数越高拟合误差越小,但差别不明显,采用理论的二次多项式拟合即可满足结构损伤识别要求,无噪声的情况下,测点数目减半不影响损伤识别的精度,该方法具有一定的抗噪声能力。     

青海东南部农村民居结构特点及抗震能力分析

我国农村民居的抗震能力具有显著的地域特点。本文基于现场调研结果总结了青海东南部黄河流域农村民居的结构特点,并对其抗震能力进行了评估。庄廓院是调研区内的典型农村民居,本文对调研区内庄廓院的木构架房屋进行研究,提出庄廓土墙围护木构架房屋的震害等级分类标准,根据实际震害资料和类比的方法确定了当地土墙围护木构架结构的震害矩阵和震害指数与峰值加速度的关系曲线。与云南鲁甸农村的土木结构房屋比较,青海庄廓院民居具有更高的抗震能力;与未设防的砖混结构比较,这种土墙围护的木构架结构在高烈度区造成人员伤亡的风险更低。     

Bayesian probabilistic damage detection of a reinforced‐concrete bridge column

A Bayesian probabilistic approach for damage detection has been proposed for the continuous monitoring of civil structures (Sohn H, Law KH. Bayesian probabilistic approach for structure damage detection. Earthquake Engineering and Structural Dynamics 1997; 26 :1259–1281). This paper describes the application of the Bayesian approach to predict the location of plastic hinge deformation using the experimental data obtained from the vibration tests of a reinforced‐concrete bridge column. The column was statically pushed incrementally with lateral displacements until a plastic hinge is fully formed at the bottom portion of the column. Vibration tests were performed at different damage stages. The proposed damage detection method was able to locate the damaged region using a simplified analytical model and the modal parameters estimated from the vibration tests, although (1) only the first bending and first torsional modes were estimated from the experimental test data, (2) the locations where the accelerations were measured did not coincide with the degrees of freedom of the analytical model, and (3) there existed discrepancies between the undamaged test structure and the analytical model. The Bayesian framework was able to systematically update the damage probabilities when new test data became available. Better diagnosis was obtained by employing multiple data sets than just by using each test data set separately. Copyright © 2000 John Wiley & Sons, Ltd.     

考虑洞室岩体应力型破坏特征的局部地应力反演方法及应用

介绍了一种考虑地下洞室片帮、钻孔剥落等岩体应力型破坏特征为信息源,通过数值模拟智能反演方法预测高应力大型地下洞室群围岩局部应力场的新思路。该方法将地下洞室群片帮、钻孔剥落等应力型破坏的位置、深度或者宽度进行定量描述,以弹性模型计算获得的常偏应力大于岩体启裂强度的范围来表示应力型破坏范围,通过分析实测地应力数据约束部分地应力数量,然后采用智能数值反演方法得到其他的地应力分量。采用该方法预测了白鹤滩水电站右岸地下厂房0+76断面附近围岩地应力场,反演获得最大主应力在34 MPa左右。通过其他部位岩体破裂的数值模拟和观测结果对比,验证了地应力场预测的合理性。     

A study on relation between acoustic emission and characteristic displacement field on the sample with multi en echelon structures — The theoretic and experimental explorations of strain gap

Based on the phenomena that the deformation gap was observed before the great Tangshang earthquake, this paper discusses the strain gap according to test and theory. The (strain) patterns were recorded photographically by realtime holographic interferometry and shadow optical method of caustics, as soon as the loading process started. In the meantime, the AE (acoustic emission) signals were recorded by a micro crack information storage-analysis system. According to damage theory and location of micro fracture, we have studied the stain gap and gained: a) It is necessary that strain gap appears under the condition of linear elasticity theory, and its situation is relatively stable, corresponding to stress concentration. b) Micro fractures, which appear initially at area of high stress, occur rarely at the strain gap, and their locations are finally in the zone between the stress concentration area and the strain gap, which indicate the clusters or groups. However, the major macro fracture (final rupture) started from the shadow areas, and then grew quickly towards the strain gaps, which resulted in failure of sample. Foundation item: The Dual Project of China Seismological Bureau (9691309020301), the Specialized Funds for National Key Basic Study (G1998040704), the project for the MOST under contract (2001BA601B02) and Youth Funds for applied basic study of the Science and Technology Bureau of Yunnan Province (98D019Q).     

Damage localization and quantification of earthquake excited RC-frames

In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structures and the ground surface acceleration. Further, the two lowest time-varying eigenfrequencies of the structure must be identified. The data considered are sampled from a series of three RC-frame model tests performed at the structural laboratory at Aalborg University, Denmark during the autumn of 1996. The frames in the test series were exposed to two or three series of ground motions of increasing magnitude. After each of these runs the damage state of the frame was examined and each storey of the frame were classified into one of the following six classifications: undamaged, cracked, lightly damaged, damaged, severely damaged or collapse. During each of the ground motion events the storey accelerations were measured by accelerometers. After application of the last earthquake sequence to the structure the frames were cut into pieces and each of the beams and columns was statically tested and damage assessment was performed using the obtained stiffnesses. The damage in the storeys determined by the suggested method was then compared to the damage classification from the visual inspection as well as the static tests. It was found that especially in the cases where the damage is concentrated in a certain area of the structure a very good damage assessment is obtained using the suggested method. © 1998 John Wiley & Sons, Ltd.     

川藏铁路交通廊道地质调查工程主要进展与成果

川藏铁路是我国正在规划建设的重点工程,由于其位于地形地貌和地质构造都极为复杂的青藏高原东部,在铁路规划建设中面临一系列迫切需要解决的关键地质问题: 区域性活动断裂与断错影响、地质灾害、高地应力及其引起的岩爆和大变形、高温热害、断裂带高压水与涌水突泥、高陡边坡稳定性等。为满足技术支撑川藏铁路规划建设、精准服务国家重大战略实施的需要,中国地质调查局部署了“川藏铁路交通廊道地质调查工程”,聚焦制约川藏铁路规划建设的关键问题,充分发挥地质调查工作对国家重大工程规划建设的支撑作用。2019年主要完成铁路沿线1:5万区域地质调查1 350 km²、1:5万地质灾害调查5 000 km²,建设6口大地热流地质参数井、8个地温监测站,完成地应力测量20孔,编制完成11份地质调查专报,提出的大渡河大桥段、理塘车站段、毛垭坝盆地段等线路优化建议/防灾建议被采纳; 首次将1:5 000大比例尺航空物探技术引入复杂山地铁路工程勘察,创新形成千米级超长水平钻孔定向取心钻进技术,实现500 m深的水平孔地应力测量突破等。该工程通过2019年调查研究,全力提升了铁路沿线地质调查程度与精度,并创新了复杂艰险山区重大工程地质问题与探测技术、地质灾害风险防控理论与减灾关键技术,有效支撑服务了川藏铁路规划建设。