GPS精密单点定位的数据处理方法综述

在GPS精密单点定位数据处理中,通常采用基于非差观测值的处理方法。然而精密单点定位也可通过观测值不同差分组合以减少某些未知参数,且在理论上与非差模型等价。文中介绍基于非差和差分模型的精密单点定位的几种数据处理方法,并对各种模型进行比较。     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。     

动态最小二乘支持向量机学习算法

针对大样本集的训练问题和动态训练样本的模型更新问题,提出了动态最小二乘支持向量机学习算法.该算法充分利用已建好的模型,逐渐加入新样本,并可删除位于任何位置的非支持向量,避免了矩阵求逆运算,保证了算法的高效率.大坝变形及电离层延迟两个时间序列的预报实例表明,该算法具有计算时间短、预报精度高的特点.     

葛店矿双庙扩大区三维地震勘探

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。     

第二次土地调查若干问题探讨

第二次土地调查的目的是全面查清全国土地利用状况,掌握真实的土地基础数据,如何保证调查的质量?文章以江阴市为例进行探讨。     

Group Time Delay in the Reflection of P-Polarized Electromagnetic Plane Waves at a Stratigraphic Interface

The group time delay (GTD) formulae of quasi-total reflection of inhomogeneous P-polarized electromagnetic waves (P-PEW, whose electric field parallels to the plane of incidence), caused by the Goos–Hänchen effect, is derived by the phase shift of the wave. A numerical example where the frequency equals to 1 GHz is given. The curves of calculating results show that there are three discontinuous points at the critical angle of phase shift vector, the critical angle of attenuation vector and 90^○. When the angle of incidence is equal to one of these three angles, the GTD will become infinite, and the electromagnetic wave will propagate along the interface. The GTD will be very large, when the angle of incidence is close to one of these three angles. The results indicate that there is an important relationship between the two critical angles and the conductivity and permittivity of the two strata, and that the GTD has an important relationship with the angle of incidence. These results can be used to determine the lithology of the strata and to delimit the interfaces of strata more effectively. It is suggested that this research may prove useful in electromagnetic logging analysis and, perhaps, in the design of logging instruments.     

Influence of dimethylsulfide produced by marine algae on the global climate

DMS (dimethylsulfide), a breakdown product of cellular solutes of many species of macroalgae andphytoplankton plays an important role in regulating global climate and counteracting partly the "greenhouse" effect.In this paper, the advance and prospects of DMS study are reviewed and discussed with respectto DMS sample storage, measurement and importance in regulating global climate and the acidity ofrain and aerosol.     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

中国大陆第四纪地壳运动时程

本文从中国大陆有代表性的青藏高原、黄土高原、三峡地区着手,进行了新构造运动剖析。并结合全国火山活动期次,总结出中国大陆第四纪地壳运动的时程变化。从而为进一步探讨新构造运动特点和规律,为国民经济建设及人类生存环境提供了一定的地质背景资料。     

A comparative error analysis of manual versus automated methods of data acquisition for algebraic strain estimation

This paper presents a statistical analysis of the algebraic strain estimation algorithm of Shimamoto and Ikeda [Shimamoto, T., Ikeda, Y., 1976. A simple algebraic method for strain estimation from deformed eillipsoidal objects: 1. Basic theory. Tectonophysics 36, 315–337]. It is argued that the error in their strain estimation procedure can be quantified using an expected discrepancy measure. An analysis of this measure demonstrates that the error is inversely proportional to the number of clasts used. The paper also examines the role of measurement error, in particular that incurred under (i) a moment based and (ii) manual data acquisition methods. Detailed analysis of these two acquisition methods shows that in both cases, the effect of measurement error on the expected discrepancy is small relative to the effect of the sample size (number of objects). Given their relative speed advantage, this result favours the use of automated measurement methods even if they incur more measurement error on individual objects. Validation of these results is carried out by means of a simulation study, as well as by reference to studies appearing in previous literature. The results are also applied to obtain an upper bound on the error of strain estimation for various studies published in the literature on strain analysis.