Late Holocene great earthquakes and relative sea‐level change at Kenai,southern Alaska

Kenai, located on the west coast of the Kenai Peninsula, Alaska, subsided during the great earthquake of AD 1964. Regional land subsidence is recorded within the estuarine stratigraphy as peat overlain by tidal silt and clay. Reconstructions using quantitative diatom transfer functions estimate co‐seismic subsidence (relative sea‐level rise) between 0.28±0.28 m and 0.70±0.28 m followed by rapid post‐seismic recovery. Stratigraphy records an earlier co‐seismic event as a second peat‐silt couplet, dated to ～1500–1400 cal. yr BP with 1.14±0.28 m subsidence. Two decimetre‐scale relative sea‐level rises are more likely the result of glacio‐isostatic responses to late Holocene and Little Ice Age glacier expansions rather than to co‐seismic subsidence during great earthquakes. Comparison with other sites around Cook Inlet, at Girdwood and Ocean View, helps in constructing regional patterns of land‐level change associated with three great earthquakes, AD 1964, ～950–850 cal. yr BP and ～1500–1400 cal. yr BP. Each earthquake has a different spatial pattern of co‐seismic subsidence which indicates that assessment of seismic hazard in southern Alaska requires an understanding of multiple great earthquakes, not only the most recent. All three earthquakes show a pre‐seismic phase of gradual land subsidence that marked the end of relative land uplift caused by inter‐seismic strain accumulation. Copyright © 2005 John Wiley & Sons, Ltd.     

Weathering process at the natural fission reactor of Bangombé

 The uranium deposits in the basin of Franceville (Gabon) host the only natural fission reactors known in the world. Unique geological conditions favoured a natural fission reaction 2 Ga ago. This was detected by anomalous isotopic compositions of uranium and rare earth elements (REE), which are produced by the fission reaction. In total, 16 reactor zones were found. Most of them are mined out. The reactor zone of Bangombé, is only 10–11 m below the surface. This site has been influenced by surface weathering processes. Six drill cores have been sampled at the site of the reactor zone of Bangombé during the course of the study and only one drill core (BAX 08) hit the core of the reactor. From these data and previous drilling campaigns, the reactor size is estimated to be 10 cm thick, 2–3 m wide and 4–6 m long. The migration of fission products can be traced by the anomalous isotope ratios of REE because of the fission process. The ¹⁴⁹Sm/¹⁴⁷Sm ratio close to the reactor zone is only 0.28 (normal: 0.92) because of the intense neutron capture of ¹⁴⁹Sm and subsequent transmutation, whereas ¹⁴⁷Sm is enriched by the fission reaction. Similar changes in isotopic patterns are detectable on other REE. The isotope ratios of Sm and Nd of whole rock and fracture samples surrounding the reactor indicate that fission-genic REE migrated only a few decimetres above and mainly below the reactor zone. Organic matter (bitumen) seems to act as a trap for fission-genic REE. Additional REE-patterns show less intense weathering with increasing depth in the log profile and support a simple weathering model. Received: 26 November 1999 · Accepted: 2 May 2000     

Effect of element size on the static finite element analysis of steep slopes

The accuracy of the computed stress distribution near the free surface of vertical slopes was evaluated in this study as a function of the element size, including aspect ratio. To accomplish this objective, a parametric study was carried out comparing stresses computed using the finite element method (FEM) to those obtained from a physical model composed of photoelastic material. The results of the study indicate a reasonable agreement between a gelatin model and the FEM model for shear stresses, and an overall good agreement between the two models for the principal stresses. For stresses along the top of the slope, the height of the element tends to be more important than width or aspect ratio, at least for aspect ratios up to 4. In all cases, the greatest difference between the two models occurs in the vicinity of the slope. Specifically, if H is defined as the slope height, an element height of H/10 appears to be adequate for the study of stresses deep within the slope, such as for typical embankment analyses. However, for cases where tensile stresses in the vicinity of the slope face which are critical, such as for the stability analysis of steep slopes, element heights as small as H/32, or higher‐order elements, are necessary. Copyright © 2001 John Wiley & Sons, Ltd.     

Minor planet short periodic perturbations: The indirect part of the disturbing function

Leverrier's development of the indirect part of the disturbing function has been extended to include terms up to degree 4 in eccentricity and inclination; the resulting series has been expressed with respect to a fixed plane, and in a computer readable form (a list of integers). Tests have been performed for the relative significance of the terms of degrees 2, 3 and 4, and estimates have been obtained for the accuracy of the short periodic perturbations of a minor planet, and of the corresponding mean orbital elements. It was found that: (i) even in extreme cases, the indirect part of the disturbing function gives rise to very small short periodic perturbations; (ii) bodies of very high eccentricity/inclination and those close to mean motion resonances are most significantly affected; (iii) indirect perturbations for minor planets can be computed up to the degree 2 terms only, without any significant loss of accuracy; and (iv) higher degree indirect perturbations appear to be important only for their contribution to the long periodic effects of higher order (with respect to the perturbing mass).     

Strong Tides in 1964 and 1982

1StrongtideandastronomicalconditionsPartial solar eclipse occurred 4 times in 1964, 1982 and 2000 respectively. Time interval is about 3 Saros periods (one Saros period is 18 years and 10.33～11.33 days). Total lunar eclipse occurred 2 times in 1964 and 2000 respectively and 3 times in 1982. However, there was no lunar eclipse in 1966, 1984 and 2002. It seems that they had similar astro-nomical conditions and the best was in 1982. The studies about the effect of tide on the global climate…     

A micromechanical finite element model for linear and damage‐coupled viscoelastic behaviour of asphalt mixture

This study presents a finite element (FE) micromechanical modelling approach for the simulation of linear and damage‐coupled viscoelastic behaviour of asphalt mixture. Asphalt mixture is a composite material of graded aggregates bound with mastic (asphalt and fine aggregates). The microstructural model of asphalt mixture incorporates an equivalent lattice network structure whereby intergranular load transfer is simulated through an effective asphalt mastic zone. The finite element model integrates the ABAQUS user material subroutine with continuum elements for the effective asphalt mastic and rigid body elements for each aggregate. A unified approach is proposed using Schapery non‐linear viscoelastic model for the rate‐independent and rate‐dependent damage behaviour. A finite element incremental algorithm with a recursive relationship for three‐dimensional (3D) linear and damage‐coupled viscoelastic behaviour is developed. This algorithm is used in a 3D user‐defined material model for the asphalt mastic to predict global linear and damage‐coupled viscoelastic behaviour of asphalt mixture. For linear viscoelastic study, the creep stiffnesses of mastic and asphalt mixture at different temperatures are measured in laboratory. A regression‐fitting method is employed to calibrate generalized Maxwell models with Prony series and generate master stiffness curves for mastic and asphalt mixture. A computational model is developed with image analysis of sectioned surface of a test specimen. The viscoelastic prediction of mixture creep stiffness with the calibrated mastic material parameters is compared with mixture master stiffness curve over a reduced time period. In regard to damage‐coupled viscoelastic behaviour, cyclic loading responses of linear and rate‐independent damage‐coupled viscoelastic materials are compared. Effects of particular microstructure parameters on the rate‐independent damage‐coupled viscoelastic behaviour are also investigated with finite element simulations of asphalt numerical samples. Further study describes loading rate effects on the asphalt viscoelastic properties and rate‐dependent damage behaviour. Copyright © 2006 John Wiley & Sons, Ltd.     

临猗5.0级地震前后品质因子值变化特征研究

利用西安数字地震遥测台网记录的数字地震资料，采用P波初动半周期残差法求得1998年7月临猗5．0级地震前后不同路径的Q(品质因子)值变化，发现在地震发生前Q值为87～203，震后Q值为67～164，震前震中区附近出现明显的高Q值异常。结果表明，地震前的高Q值异常可以作为地震预测的一种手段。