金刚石工具富铁胎体掺杂稀土的研究

稀土的加入量、加入形态和在混料中的均匀弥散性直接影响热压富铁金刚石复合材料的性能。改进的稀土掺杂工艺，保证了稀土在胎体中的均匀弥散性；通过试验研究了稀土的加入量与富铁胎体的抗弯强度、抗冲击韧性和孔隙率的关系，从而确定了稀土的最优加入量。通过差热分析试验，认为稀土可以改变富铁胎体的热物理特性。     

加水热模拟中深湖与煤系泥岩地化特征比较

通过深湖泥岩和煤系泥岩的加水热模拟研究认为,在热模拟实验过程中,深湖泥岩和煤系泥岩显示不同特征,并且其演化有差别。深湖泥岩利于液态原油的生成,并且转化率高于煤系泥岩。深湖泥岩残余可溶有机质饱和烃含量高于煤系泥岩,非烃含量则低于煤系泥岩。深湖泥岩胶质 /沥青质和饱芳比均随温度升高而降低,而煤系泥岩的胶质 /沥青质随温度升高有增加趋势,其饱芳比的变化则不大或有降低趋势。深湖泥岩的T_max难以指示演化阶段,其干酪根碳同位素值明显轻于煤系泥岩,它们的值均随温度的升高而变重。     

机械研磨对平鲁煤系高岭石热行为的影响

对煤系高岭石进行0-2h的研磨之后，再在900℃、1000℃、1400℃的温度条件下分别对其加热1h，然后利用X射线衍射（XRD）、差热分析（DTA）、红外光谱（IR）等手段，研究机械研磨对于煤系高岭石晶体结构的破坏作用以及对其热行为的影响。结果显示，煤系高岭石被研磨1h之后，高岭石的晶体结构几乎全部跨塌。把研磨1h的煤系高岭石加热到1000℃（加热1h），便能形成结晶良好的莫来石。     

High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey

Thermal waters hosted by Menderes metamorphic rocks emerge along fault lineaments in the Simav geothermal area. Thermal springs and drilled wells are located in the Eynal, Çitgöl and Na a locations, which are part of the Simav geothermal field. Studies were carried out to obtain the main chemical and physical characteristics of thermal waters. These waters are used for heating of residences and greenhouses and for balneological purposes. Bottom temperatures of the drilled wells reach 163°C with total dissolved solids around 2225 mg/kg. Surface temperatures of thermal springs vary between 51°C and 90°C. All the thermal waters belong to Na–HCO₃–SO₄ facies. The cold groundwaters are Ca–Mg–HCO₃ type. Dissolution of host rock and ion-exchange reactions in the reservoir of the geothermal system shift the Ca–Mg–HCO₃ type cold groundwaters to the Na–HCO₃–SO₄ type thermal waters. Thermal waters are oversaturated at discharge temperatures for aragonite, calcite, quartz, chalcedony, magnesite and dolomite minerals giving rise to a carbonate-rich scale. Gypsum and anhydrite minerals are undersaturated with all of the thermal waters. Boiling during ascent of the thermal fluids produces steam and liquid waters resulting in an increase of the concentrations of the constituents in discharge waters. Steam fraction, y, of the thermal waters of which temperatures are above 100°C is between 0.075 and 0.119. Reservoir pH is much lower than pH measured in the liquid phase separated at atmospheric conditions, since the latter experienced heavy loss of acid gases, mainly CO₂. Assessment of the various empirical chemical geothermometers and geochemical modelling suggest that reservoir temperatures vary between 175°C and 200°C.     

Chemical equilibria of thermal waters for the application of geothermometers from the Guanzhong basin, China

In this study, representative samples from thermal wells and springs were chemically analyzed and geothermometers were used to calculate the deep temperatures of geothermal reservoirs on the basis of water–mineral equilibrium. In some cases, however, the chemical components are not in equilibrium with the minerals in the reservoir. Therefore, log(Q/K) diagrams are used to study the chemical equilibrium for the minerals that are likely to participate. The Na–K–Mg triangular diagram is also applied to evaluate the equilibrium of water with reservoir rocks. Standard curves at the reference temperatures are prepared to reveal which type of silica geothermometer is appropriate for the specified condition. This study shows that water samples from geothermal wells W9 and W12 are in equilibrium with the selective minerals, and chalcedony may control the fluid–silica equilibrium. It is estimated that there is an exploitable low-temperature reservoir with possible temperatures of 80–90°C in the Guanzhong basin.     

硬玉的差热分析和紫外荧光光谱研究

通过对缅甸硬玉的差热分析和紫外荧光光谱研究，发现不同颜色硬玉的紫外荧光谱中的617nm处的谱峰，可能是Cr引起的；对不同颜色硬玉进行的差热分析表明，其熔融温度略有不同，说明其生长环境有一定差异，而硬玉也可能是较好的耐热材料，具一定的开发潜能。