太行山东麓构造岩浆带在豫北安林地区的活动特点及控矿特征

安林地区的构造活动,对剖析太行山东麓构造岩浆带成生、演化具有一定的代表性。本区自燕山运动开始就受到了变质核杂岩和伸展拆离构造控制,区内主要构造有NNE向和NW向两组,其中NNE向构造在区内等间距形成了五条规模大的深断裂,均具高角度正断层性质。NW向构造形成了天喜镇-磊口北西向构造岩浆岩带,包括了塔山穹窿式背斜和白玉村-宝山墙状岩体,两组构造均对燕山晚期中-碱性岩浆上侵和安林式矽卡岩型铁矿的形成具重要控制作用。     

云南维西三叠纪攀天阁火山弧区域地质特征及找矿意义

攀天阁火山弧是江达―维西陆缘火山弧的二级构造单元,近年通过大量的野外地质调查和综合研究,发现铁铜铅锌金银等多个矿点,并初步认为攀天阁火山弧的成矿环境与多岛弧盆及次一级多个封闭或半封闭,并属于弧间盆地的弧内坳陷洼地的古地理构造有关。且弧内可能存在一个局部拉张环境下形成的小海盆,海盆于晚三叠世晚期关闭,结束了攀天阁火山弧的弧盆成矿演化阶段。剐抓瓜断裂可能是小海盆关闭的产物。燕山-喜马拉雅期大规模、大范围的构造叠加,使该区又进入陆内构造转换成矿演化阶段,多岛弧盆的古地理格局与大范围、多期次的成矿构造事件叠加,使弧内沿剐抓瓜断裂一带成为主要的矿集区,并且区域物化探综合异常与矿集区矿点叠合较好,关联性强。综合认识这些特点对攀天阁火山弧的弧内找矿工作具有十分重要的意义。     

河南省侵入岩构造单元的划分及其特征

河南省岩浆活动显示多期活动的特征,侵入岩较发育,占全省基岩出露面积的23.5%以上,岩石类型齐全,与其有成生联系的矿产资源丰富。文章参考潜力评价全国构造侵入岩带的总体划分方案,结合河南省岩浆岩分布特征、岩石类型、岩石组合及岩浆岩的演化规律,划分出2个构造侵入岩省、5个构造侵入岩带、12个构造侵入岩亚带、进一步划分出22个构造侵入岩段,并对其基本特征及与成矿关系进行总结。     

精密水准与GNSS垂向形变关系研究——以天山构造带为例

以天山构造带区域为例,分别用精密水准和GNSS给出地壳形变垂直运动速率矢量图,对其差异及差异形成的原因进行深入分析和探讨,并基于优势互补原则,给出二者融合的形变图像。根据多年研究经验认为,该方法得到的垂直形变图在强震中长期预测中具有较为重要的应用价值。     

�й���½GPS����Ĺ��켰����ѧ��������Ԫ����

????????й?????????????????????????????????????????????????????????????????????????μ??й?????α? ?????GPS???????????????????????????????:??????????????????10???????й????????????????????????10??GPS?????????????????????;?????????????????????:??????????????????????????,??????????????????????????????????????,??????????????????????黡???????????????????????????,?????????????????????????????????????????????:1)?й?????????????????????????????????????????????????????????????????????????????;2)?Щ????????????????????????????????????й??????????????????     

������������Ӧ�����궯̬�仯��������ֵģ��

?????????????????????????????????????ó???????????????????????仯??????1???????????仯????????????????NNW-SSE??????????3~9 kPa a^-1???????????仯???????????????NEE-SWW??????????1~6 kPa a^-1?????????????????????????????????????￡?2???????????仯????????????????NNW????????????????,??????????????????????????????????仯???????????????NEE????????λ?????????????????????仯????????????????????????????????????????????п????????Щ???????????????????3?????????????????????????????????з???????????-???ε???????????????????6 kPa a^-1?????-?????ε???????????????????5 kPa a^-1???????κ??????媲????ε????????????????????3~4 kPa a^-1??     

油气田裂缝密度定量研究方法

本文首先简要评述了目前研究裂缝方法的优缺点。用实例介绍了裂缝密度的定量估计方法,这种方法能将岩芯资料和地震资料有机地结合起来。应用这种方法不但能预测区域性裂缝及油气分布规律,而且能回答所获得成果的正确程度。     

鄂尔多斯盆地及其周边的新构造运动

本区新构造运动十分活跃,表现出多次波动性,周边山系呈不均衡抬升,盆地则呈不均衡沉降,因此使盆地呈现不对称的簸箕状,盆地中的水系结构也呈现不对称性。区内构造变形主要有褶皱、断裂、新隆起、新坳陷、拱曲和掀斜等,并产生现代地震、地热和火山活动。不均衡掀斜是导致上述现象的根本原因。     

Palaeosurfaces in central West Greenland as reference for identification of tectonic movements and estimation of erosion

Landform analysis of basement rocks has been undertaken with the aid of digital elevation data, aerial photographs and field observations in central West Greenland (69°15′N–66°00′N). Palaeosurfaces have been identified, dated relatively to each other, used to quantify uplift and fault movements and also used to estimate differential erosion. Two types of palaeosurfaces were mapped across the Precambrian basement: a surface at low elevation with distinct hills (hilly relief), and two planation surfaces formed across different types of basement rocks. The hilly relief surface emerges as an inclined surface from Cretaceous cover rocks in Disko Bugt and is interpreted as a stripped late Mesozoic etch surface. This surface is cut off towards the south by a less inclined planation surface, which is younger and thus of Cenozoic age. It is similar to the post-Eocene (Miocene?) planation surfaces identified on Disko and Nuussuaq in other studies. The planation surface splits in two southwards towards high areas around Nordre Isortoq and Sukkertoppen Ice Cap. The upper planation surface forms near-summit areas of tectonic blocks dipping in different directions and with different tilts. The uplift centres define the crests of two mega blocks, separated by the ‘Sisimiut Line’ which coincides with the Precambrian Ikertôq thrust zone. A partially developed lower planation surface indicates a first uplift of maximum 500 m followed by a second uplift of maximum 1000 m. We infer that these uplift events occurred during the late Neogene based on correlation with similar surfaces on Nuussuaq and the timing of exhumational events estimated from apatite fission track analyses of samples from a deep borehole on Nuussuaq (reported elsewhere). The difference between a reconstruction of the upper planation surface across the entire area and the present topography was used as an estimate of erosion of basement rock since the formation of the upper planation surface. The erosion is unevenly distributed and varies from almost none on the well-preserved planation surfaces to 800–1300 m along valleys, and even more in the fjords. Erosion is less within areas of gneiss in granulite facies, than in areas of gneiss in amphibolite facies.     

陕西驾鹿金矿床地质特征及成因探讨

驾鹿金矿床是小秦岭金矿带中一个比较特殊的矿床类型，产于古老韧性剪切带中，围岩蚀变强烈而广泛，尤其是成脉前的钾长石化。蚀变带及其中的石英脉控制了金矿体的产出，矿床属蚀变岩型金矿，成矿时代为燕山晚期．本文在论述矿床地质特征的基础上，通过稳定同位素研究，认为燕山期构造热事件是成矿的主导控制因素，成矿溶液来自大气降水，成矿物质则部分来自太华群，部分来自上覆中元古界高山河组，矿床成因属大气降水热液矿床．