Numerical modeling of long waves in shallow water using Incremental Differential Quadrature Method

Incremental Differential Quadrature Method (IDQM) as a rapid and accurate method for numerical simulation of Nonlinear Shallow Water (NLSW) waves is employed. To the best of authors’ knowledge, this is the first endeavor to exploit DQM in coastal hydraulics. The one-dimensional NLSW equations and related boundary conditions are discretized in space and temporal directions by DQM rules and the resulting system of equations are used to compute the state variables in the entire computational domain. It was found that the splitting of total simulation time into a number of smaller time increments, could significantly enhance the performance of the proposed method. Furthermore, results of this study show two main advantages for IDQM compared with other conventional methods, namely; unconditional stability and minimal computational effort. Indeed, using IDQM, one can use a few grid points (in spatial or time direction) without imposing any stability condition on the time step to obtain an accurate convergent solution.     

任意曲线曲面上重磁位场转换的B样条函数法

提出用B样条函数求解曲线、曲面上重磁位场的向上延拓,水平、垂向导数计算,磁异常分量互换的方法。该方法的特点是:原理简明,程序通用性强,计算精度高。     

In situ and satellite observations of the eastward migration of the Western Alboran Sea Gyre

During October 2003 an intensive oceanographic survey (BIOMEGA) was carried out in the Alboran Sea, coinciding with a migration event of the Western Alboran Sea Gyre (WAG). The observations gathered during that cruise constitute the first field evidence of a migrated stage of the WAG. In this work we present the main differences between the 3D hydrodynamic fields observed during BIOMEGA and those corresponding to a WAG located at its usual position. The migration of the gyre was followed by satellite (altimetry and sea surface temperature) imagery. The causes of the gyre migration are explored in terms of the quasi-geostrophic tendency equation, in particular of the dynamics governing scales larger than the Rossby radius of deformation. It is shown that the steady state gyre must be almost equivalent barotropic and that the key process to break down the stationarity would be a density advection at gyre scale. The mechanisms to explain the migration of the WAG proposed by previous authors are discussed in light of the explanation proposed in this work.     

Freshening of the Intermediate Waters in the Northern South China Sea over the PastSix Decades

The properties of salinity in the South China Sea (SCS), a significant marginal sea connecting the Pacific andIndian Oceans, are greatly influenced by the transport of fresh water flux between the two oceans. However, the long-termchanges in the intermediate water in the SCS have not been thoroughly studied due to limited data, particularly in relationto its thermodynamic variations. This study utilized reanalysis data products to identify a 60-year trend of freshening in theintermediate waters of the northern South China Sea (NSCS), accompanied by an expansion of low-salinity water. Thestudy also constructed salinity budget terms, including advection and entrainment processes, and conducted an analysis ofthe salinity budget to understand the impacts of external and internal dynamic processes on the freshening trend of theintermediate water in the NSCS. The analysis revealed that the freshening in the northwest Pacific Ocean and theintensification of intrusion through the Luzon Strait at intermediate levels are the primary drivers of the salinity changes inthe NSCS. Additionally, a weakened trend in the intensity of vertical entrainment also contributes to the freshening in theNSCS. This study offers new insights into the understanding of regional deep sea changes in response to variations in boththermodynamics and oceanic dynamic processes.     

我国灌区地下水调控研究现状及其发展态势

现代灌溉引水工程的发展,改善了灌区的农业用水条件,但同时改变了灌区上的自然生态环境、地质条件与水文地质条件等。分阶段总结了地下水的相关研究与应用;剖析了地下水调控的必要性与重要性;分析了地下水调控研究现状;最后通过总结给出了进一步研究的建议。     

Estimation of hydraulic permeability considering the micro morphology of rocks of the borehole YAXCOPOIL-1 (Impact crater Chicxulub,Mexico)

Internal surface, formation factor, Nuclear Magnetic Resonance (NMR)-T2 relaxation times and pore radius distributions were measured on representative core samples for the estimation of hydraulic permeability. Permeability is estimated using various versions of the classic Kozeny–Carman-equation (K–C) and a further development of K–C, the fractal PaRiS-model, taking into account the internal surface. In addition to grain and pore size distribution, directly connected to permeability, internal surface reflects the internal structure (“micro morphology”). Lithologies could be grouped with respect to differences in internal surface. Most melt rich impact breccia lithologies exhibit large internal surfaces, while Tertiary post-impact sediments and Cretaceous lithologies in displaced megablocks display smaller internal surfaces. Investigations with scanning electron microscopy confirm the correlation between internal surface and micro morphology. In addition to different versions of K–C, estimations by means of NMR, pore radius distributions and some gas permeability measurements serve for cross-checking and calibration. In general, the different estimations from the independent methods and the measurements are in satisfactory accordance. For Tertiary limestones and Suevites bulk with very high porosities (up to 35%) permeabilites between 10⁻¹⁴ and 10⁻¹⁶ m² are found, whereas in lower Suevite, Cretaceous anhydrites and dolomites, bulk permeabilites are between 10⁻¹⁵ and 10⁻²³ m².     

Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

三维地震小面元采集技术在晋城矿区的应用

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。     

Environmental impacts from mining at Taojiang Mn ore deposit, central Hunan, China

The Taojiang Mn ore deposit was exploited in the early 1960s, and waste rocks were developed since then. Because the Mn ores were hosted within the metal-enriched black shales （Peng et al., 2004）, the continuous mining has led to the exposure of an immense quality of black shales, which might cause serious impacts on environments. The present study deals with this environmental issue with samples from the waste rocks, and from the surrounding soils and surface water. The mineralogy of the waste rock was studied using EMPA, then a large number of elements in all waste rock, soil, and water samples were analyzed at a wide range of concentrations with high accuracy using an Elan6000 ICP-MS machine at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences. The waste rock is composed mostly of black shales, with minor Mn carbonates. Both black shales and Mn carbonates of the waste rock contain many sulfide minerals, mainly pyrite, with minor galena, sphalerite, chalcopyrite, and others. The waste rocks are enriched in many metals including Sc, V, Cr, Co, Ni, Fe, Mn, Cu, Zn, Pb, Th, U, Mo, Sb, Sn, Tl, and others, and the metals are mostly hosted within the sulfides. Weathering of waste rocks might cause emission of the following metals： V, Cd, Ni, Th, U, Mo, Sb, Tl, Sc, Cr, Cu, Zn, Sn, and minor Co, and Pb. The surrounding soils are highly enriched in Cr, Co, Cu, Zn, Mn, Mo, Cd, Tl, and Pb, with the enrichment factors of 2.67.3.8, 7.26, 7.27, 8.2, 5.7, 13, and 5.4, respectively. The element ratios （Rb/Cs, Fe/Mn, Nb/Zr, Hf/Zr, and Ba/Sr） and REE distribution patterns of the soils are similar to those of the waste rocks and bedrocks.