新疆帕米尔跃动冰川遥感监测研究

2015年5月,新疆克孜勒苏柯尔克孜自治州阿克陶县公格尔九别峰北坡克拉牙依拉克冰川发生跃动,造成草场和部分房屋被冰体淹没,本文针对这一冰川跃动事件的发生过程进行研究.利用2013-2015年间ASTER立体像对数据监测了克拉牙依拉克冰川的冰川表面高程的变化,并利用2015年4月13日至2015年7月11日期间的LandsatOLI数据监测了冰川的表面运动速度变化.监测发现,克拉牙依拉克冰川从2015年4月13号开始活动强烈,表面运动速度呈加快趋势,2015年5月8-15日期间冰川表面运动速度达到最高水平,其最大运动速度在西支中部达到了(20.40±0.42)m·d^-1,冰川跃动达到顶峰.冰川跃动"积蓄区"位于西支冰川平衡线以下区域,跃动向下游接收区输送冰体体积约为2.4×10⁸m³,大量冰体堆积在东西支汇合口地段(海拔3100~3500m),造成了该处冰面隆起,其中最大隆起高度为(130.58±0.70)m.本文获得了西支冰川由静止期、跃动状态、恢复到稳定状态期间的冰面高程和表面运动速度变化,为本地区冰川跃动机理的研究奠定了基础.     

基于ANSYS与OpenGL的高速公路结构物仿真建模及三维地层地表修剪方法

现代三维视景建模与仿真技术在高速公路工程选线、施工以及运营管理中具有良好的应用前景。结构物的仿真建模以及能反映施工前后地表形态变化的三维地层模型研究是高速公路信息化中的重要问题。介绍了一种借用ANSYS有限元分析软件提取结构物三维模型表面几何信息的简便方法;结合OpenGL纹理贴图技术,实现了结构物的仿真建模;针对结构物施工后对地表形态改变较大的问题,提出利用结构物表面数据对三维地层模型地表网格进行修剪的方法--地表网格竖直投影修剪法。把上述方法应用到广东省某高速公路高边坡的三维视景仿真建模中,结果表明,边坡的仿真模型较逼真。三维地层模型修剪后的地表形态与真实情况接近,验证了方法的合理性、可靠性。     

苏州城市规划区Ⅱ承压水开采与地面沉降预防控制研究

在孔隙承压水开采与地面沉降的关系上存在2种观点。水、土应力平衡理论认为：只要开采承压水，就会引发应力失衡并导致地面沉降；而水、土动态平衡理论则认为：除非开采水压力至水、土应力平衡面以下，否则不会引发地面沉降。苏州城市规划区第Ⅱ承压水开采水位与地面沉降动态观测表明，在-33m处存在一个天然动态水、土应力平衡面。第Ⅱ承压含水层形成后，经上覆堆积物自重压力长期压缩作用，其水压力具较高的压强．这种天然状态下产生的弹性释放储存量可开采利用多少，取决于开采状态下水、土应力平衡时可消耗压力水柱高度中的水头值。因而地面沉降的根本原因是开采水位超过了-33m，突破了天然状态水、土应力平衡面水位。Ⅱ承压含水层在天然状态受上覆堆积物重力产生的高压强弹性释放储存量现象，可以帮助我们确立该地区孔隙Ⅱ承压水开采不产生地面沉降的临界水位(水、土应力平衡面)。这一点对承压水开采条件、可开采资源性质具有重大实际意义。同样可以应用于饱受地面沉降困扰的无锡、常州及周边地区，为地下水开发利用政策由单一的封井停采转为目标水位控制开采提供了科学依据。同时也为此政策在承压水动力学机制上找到了内在原因。     

陆面露水资源开发利用技术初探

简要归纳了陆面露水资源独特的生态和气候效应,分析了开发利用陆面露水资源的理论依据,并重点从局地气候条件的选择和陆水凝结面的改进2个方面讨论了陆面露水资源开发利用的科学思路和技术措施。     

Adsorption of Copper, Nickel, and Cadmium on Goethite in the Presence of Organic Ligands

Adsorption of copper, cadmium and nickel at low concentrations on goethite was studied in the presence of the simple organic ligands oxalate, salicylate, and pyromellitate. The experimental metal adsorption behavior was compared to calculations with a surface complexation model to evaluate the most important interactions. Oxalate mostly decreased Cu and Ni adsorption at high pH-values by competition between solution and surface complexation but had no effect on Cd adsorption. Cu adsorption in the presence of oxalate below pH 6 could best be described by defining a ternary complex of type A (surface-metal-ligand). Salicylate had only minor effects on metal adsorption. The adsorption of Cu in the presence of salicylate above pH 5 could be explained by a ternary complex of type A. Pyromellitate increased the adsorption of Cu and Cd in the acidic pH-range, likely by formation of ternary surface complexes of type B (surface-ligand-metal).     

Numerical Simulation of 3D Borehole‐to‐Surface Electrical Method

The anomaly response characteristics of the vertical line‐source 3D borehole‐to‐surface model are simulated by an adaptive finite element method. The calculation shows that the anomaly in the radial direction is pressed and the closer to the source, the more pronounced, the anomaly is stretched in the direction perpendicular to the radius. Adding a B pole in the Y direction can offset the effect of stretching to some extent. The anomaly that is closer to the source of the profile is clearer than the anomaly that is far from the source. The research results are of great significance for guiding the practical application of the borehole‐to‐surface electrical method.     

A CLOUD-RESOLVING MODELING STUDY OF SURFACE RAINFALL PROCESSES ASSOCIATED WITH LANDFALLING TYPHOON KAEMI(2006)

The detailed surface rainfall processes associated with landfalling typhoon Kaemi(2006) are investigated based on hourly data from a two-dimensional cloud-resolving model simulation. The model is integrated for 6 days with imposed large-scale vertical velocity, zonal wind, horizontal temperature and vapor advection from National Center for Environmental Prediction (NCEP) / Global Data Assimilation System (GDAS) data. The simulation data are validated with observations in terms of surface rain rate. The Root-Mean-Squared (RMS) difference in surface rain rate between the simulation and the gauge observations is 0.660 mm h^-1, which is smaller than the standard deviations of both the simulated rain rate (0.753 mm h^-1) and the observed rain rate (0.833 mm h^-1). The simulation data are then used to study the physical causes associated with the detailed surface rainfall processes during the landfall. The results show that time averaged and model domain-mean P_s mainly comes from large-scale convergence (Q_WVF) and local vapor loss (positive Q_WVT). Large underestimation (about 15%) of P_s will occur if Q_WVT and Q_CM (cloud source/sink) are not considered as contributors to P_s. Q_WVF accounts for the variation of P_s during most of the integration time, while it is not always a contributor to P_s. Sometimes surface rainfall could occur when divergence is dominant with local vapor loss to be a contributor to P_s. Surface rainfall is a result of multi-timescale interactions. Q_WVE possesses the longest time scale and the lowest frequency of variation with time and may exert impact on P_s in longer time scales. Q_WVF possesses the second longest time scale and lowest frequency and can explain most of the variation of P_s. Q_WVT and Q_CM possess shorter time scales and higher frequencies, which can explain more detailed variations in P_s. Partitioning analysis shows that stratiform rainfall is dominant from the morning of 26 July till the late night of 27 July. After that, convective rainfall dominates till about 1000 LST 28 July. Before 28 July, the variations of in rainfall-free regions contribute less to that of the domain-mean Q_WVT while after that they contribute much, which is consistent to the corresponding variations in their fractional coverage. The variations of Q_WVF in rainfall regions are the main contributors to that of the domain-mean Q_WVF, then the main contributors to the surface rain rate before the afternoon of 28 July.     

黄土高原半干旱区非均一下垫面粗糙度分析

利用2007年4月17日-2008年4月16日兰州大学半干旱气候与环境观测站边界层气象塔的风速、 风向、 温度、 气压、 湿度等观测资料, 采用经典的廓线法和风速、 风向标准差法, 分别计算了中性大气层结下观测站下垫面粗糙度长度, 并得到了具有黄土高原地理特征的地表粗糙度及其时空变化特征。计算结果表明, 季节变化对粗糙度的影响幅度可达0.159 m, 空间非均一性对粗糙度的影响幅度可达0.155 m。测站附近粗糙度春季为0.017 m, 夏季为0.062 m, 秋季为0.065 m, 冬季为0.018 m。测站西北方向上游粗糙度春季为0.17 m, 夏季为0.22 m, 秋季为0.34 m, 冬季为0.05 m。测站东南方向上游粗糙度春季为0.11 m, 夏季为0.17 m, 秋季为0.19 m, 冬季为0.05 m。该站下垫面粗糙度计算宜选用风速为6±1.5 m·s-1, 风向变化30°范围内的数据。     

二维能量平衡模式中大气温度对二氧化碳增温效应的响应

利用一个考虑了辐射能传输的二维能量平衡气候模式,解析地分析了二氧化碳浓度改变后冰界纬度的变化,得到了冰界纬度随CO2浓度变化的关系以及全球平均温度的变化曲线.结果表明,当CO2浓度由工业革命前的280×10-6增加到700×10-6时,冰界仅后退(北半球向北)几个纬度;当CO2的浓度继续增加时,冰界纬度会加速向极地退缩,直至出现全球无极冰覆盖的现象.同样地,当CO2浓度由280×10-6增加到700×10-6时,全球地表平均温度虽然在增加,但增加的速率很小,并且增加的速率在减小,而当大于700×10-6之后,温度增加的速率会快速增大,温度将加速上升.对不同反照率进行敏感性试验,发现当反照率从0.1到0.32时,结果并没有显著地改变,即结果对反照率的变化并不敏感.这一计算结果表明,在目前的状态下,由CO2引起的增温作用似乎处于变化很小的准饱和状态,即目前气候不会因为CO2浓度的增加而迅速变暖.较为实际的情形可能是大气温度在缓慢增加到一定程度后才会迅速升高.这并不意味着可以忽视CO2的增温效应,因为根据计算结果,这个临界值大概在700×10-6左右,当CO2浓度增加到超过临界值之后,气温会剧烈上升,气候将会处在一个非常温暖的阶段.     

Estimation of Regional Evapotranspiration by Combining Aircraftand Ground-Based Measurements

Two methods are examined for combining measurements from instrumented aircraftand towers to estimate regional scale evapotranspiration. Aircraft data provided spatially averaged values of properties of the surface, the evaporative fraction and maximum stomatal conductance. These quantities are less sensitive to meteorological conditions than the turbulent fluxes of heat and water vapour themselves. The methods allowed aircraft data collected over several days to be averaged and thus to reduce the random error associated with the temporal under-sampling inherent in aircraft measurements. Evaporative fraction is estimated directly from the aircraft data, while maximum stomatal conductance is estimated by coupling the Penman–Monteith equation to a simple model relating surface conductance to the incoming shortwave radiation and specific humidity saturation deficit. The spatial averages of evaporative fraction and maximum stomatal conductance can then be used with routine tower data to estimate the regional scale evapotranspiration. Data from aircraft flights and six ground based sites during the OASIS field campaign in south–east New South Wales in 1995 have been used to check the methods. Both the evaporative fraction and the maximum stomatal conductance derived from the aircraft data give information on the spatial variability of the surface energy budget at scales from 10 to 100 km. Daily averaged latent heat fluxes estimated using these methods for the OASIS study region agree with the available observations in quasi-stationary conditions or in weakly non-stationary conditions when the data from several aircraft flights are averaged to reduce the impact of short term imbalances in the surface energy budget.