台风"杜鹃"影响期间福建大风天气的特点及成因

台风“杜鹃”影响期间，福建大风天气出现的比较早，而且范围比较大．本文通过对天气尺度的环境场、具有代表性的单站资料的对比分析，寻求大风出现的原因．还深入利用MM5模式对台风的气压场、风场、流场等进行数值模拟，分析结果表明台湾地形倒槽的形成对此次大风天气出现有着重要的作用，此外从流场分型的角度进一步分析台湾地形倒槽的形成原因．     

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Experimental and computational validation and verification of the Stokes–Darcy and continuum pipe flow models for karst aquifers with dual porosity structure

In our previous study, we developed the Stokes–Darcy (SD) model was developed for flow in a karst aquifer with a conduit bedded in matrix, and the Beavers–Joseph (BJ) condition was used to describe the matrix–conduit interface. We also studied the mathematical well‐posedness of a coupled continuum pipe flow (CCPF) model as well as convergence rates of its finite element approximation. In this study, to compare the SD model with the CCPF model, we used numerical analyses to validate finite element discretisation methods for the two models. Using computational experiments, simulation codes implementing the finite element discretisations are then verified. Further model validation studies are based on the results of laboratory experiments. Comparing the results of computer simulations and experiments, we concluded that the SD model with the Beavers–Joseph interface condition is a valid model for conduit–matrix systems. On the other hand, the CCPF model with the value of the exchange parameter chosen within the range suggested in the literature perhaps does not result in good agreement with experimental observations. We then examined the sensitivity of the CCPF model with respect to the exchange parameter, concluding that, as has previously been noted, the model is highly sensitive for small values of the exchange parameter. However, for larger values, the model becomes less sensitive and, more important, also produces results that are in better agreement with experimental observations. This suggests that the CCPF model may also produce accurate simulation results, if one chooses larger values of the exchange parameter than those suggested in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

Analogue study of particle segregation in pyroclastic density currents, with implications for the emplacement mechanisms of large ignimbrites

Abstract Analogue flume experiments were conducted to investigate the transport and sedimentation behaviour of turbulent pyroclastic density currents. The experimental currents were scaled approximately to the natural environment in three ways: (1) they were fully turbulent; (2) they had a very wide range of particle sizes and associated Rouse numbers (the ratio of particle settling velocity to effective turbulent eddy velocity in the current); and (3) they contained particles of two different densities. Two sets of surge‐type experiments were conducted in a 5 m long, water‐filled lock‐exchange flume at five different volumetric particle concentrations from 0·6% to 23%. In one set (one‐component experiments), the currents contained just dense particles; in the other set (two‐component experiments), they contained both light and dense particles in equal volume proportions. In both sets of experiments, the population of each component had a log‐normal size distribution. In the two‐component experiments, the size range of the light particle population was selected in order to be in hydrodynamic equivalence with that of the dense particles. Dense particles were normally graded, both vertically and downstream, in the deposits from both sets of experiments. The mass loading (normalized to the initial mass of the suspension) and grain size of the dense component in the deposits decreased with distance from the reservoir and were insensitive to initial total particle concentration in the currents. On the other hand, in the two‐component experiments, the light particles were extremely sensitive to concentration. They were deposited in hydrodynamic equivalence with the dense particles from dilute currents, but were segregated efficiently at concentrations higher than a few per cent. With increasing particle concentration, the large, light particles were carried progressively further down the flume because of buoyancy effects. Deposits from the high‐concentration currents exhibited reverse vertical grading of the large, light particles. Efficient segregation of the light component was observed even if the bulk density of the current was less than that of the light particles. In both sets of experiments, marked inflexions in the rate of downstream decline in mass loading and maximum grain size of the dense component can be attributed to the presence of two different particle settling regimes in the flow: (1) particles with Rouse numbers >2·5, which did not respond to the turbulence and settled rapidly; and (2) particles with Rouse numbers <2·5, which followed the turbulent eddies and settled slowly. The results are applied to the transport and sedimentation dynamics of pyroclastic density currents that generate large, widespread ignimbrites. Field data fail to reveal significant departures from aerodynamic equivalence between pumice and lithic clasts in three such ignimbrites: the particulate loads of some large ignimbrites are transported principally in turbulent suspensions of low concentration. In some ignimbrites, the well‐developed inflexions in curves of maximum lithic (ML) size vs. distance can be attributed to the existence of distinct high and low Rouse number particle settling regimes that mark the transition from an overcharged state to one in which the residual particulate load is transported more effectively by turbulence.     

福建及台湾海峡地震预警工程架构探索

福建及台湾海峡是海陆板块碰撞到板内地震活动过渡带 ,东侧毗邻台湾板缘地震带 ,西侧为福建内陆板内地震活动区。这是得天独厚的观测研究大陆边缘地震构造带强震活动及板块动力学的良好地域。当前 ,我国进入全面建设小康社会历史时期 ,为防御地震造成社会灾害 ,实现以人为本 ,防患于未然 ,势必需要建构一个实用化的地震预警工程及其机制。本文即是在对福建及台湾海峡近 30多年以来观测研究的基础上 ,提出应用现代空间技术、数字地震、计算机网络等技术架构地震预警工程与机制的一种设想。     

LiDAR-based digital terrain analysis of an area exposed to the risk of lava flow invasion: the Zafferana Etnea territory, Mt. Etna (Italy)

The town of Zafferana Etnea, located on the southeastern slope of Mt. Etna volcano (Italy), has been repeatedly threatened by lava flows in recent centuries. The last serious threat occurred during the 1991–1993 eruption, when the lava front came to a halt only 1.7 km from the centre of town. Morphostructural data derived from light detection and ranging (LiDAR) surveys carried out on Etna in 2005 have enabled us to evaluate the risk of lava invasion in a section (16 km²) of the Zafferana Etnea territory. Qualitative and quantitative results are obtained combining the information derived from LiDAR analysis with geological, morphological and structural data using geographic information systems technology (GIS). The study quantifies in unprecedented detail the areal extent and volume of forested and urban areas and its degree of exposure to different levels of hazard from future lava invasion. Nearly 52% of the urban texture fall into areas of moderate to high risk from lava invasion. Future land use planning should take these findings into account and promote new development preferentially in areas of lower risk.     

An Overview of BCC Climate System Model Development and Application for Climate Change Studies

This paper reviews recent progress in the development of the Beijing Climate Center Climate System Model(BCC-CSM) and its four component models(atmosphere,land surface,ocean,and sea ice).Two recent versions are described:BCC-CSM1.1 with coarse resolution(approximately 2.8125°×2.8125°) and BCC-CSM1.1(m) with moderate resolution(approximately 1.125°×1.125°).Both versions are fully coupled climate-carbon cycle models that simulate the global terrestrial and oceanic carbon cycles and include dynamic vegetation.Both models well simulate the concentration and temporal evolution of atmospheric CO_2 during the 20th century with anthropogenic CO2 emissions prescribed.Simulations using these two versions of the BCC-CSM model have been contributed to the Coupled Model Intercomparison Project phase five(CMIP5) in support of the Intergovernmental Panel on Climate Change(IPCC) Fifth Assessment Report(AR5).These simulations are available for use by both national and international communities for investigating global climate change and for future climate projections.Simulations of the 20th century climate using BCC-CSMl.l and BCC-CSMl.l(m) are presented and validated,with particular focus on the spatial pattern and seasonal evolution of precipitation and surface air temperature on global and continental scales.Simulations of climate during the last millennium and projections of climate change during the next century are also presented and discussed.Both BCC-CSMl.l and BCC-CSMl.l(m) perform well when compared with other CMIP5 models.Preliminary analyses indicate that the higher resolution in BCC-CSM1.1(m) improves the simulation of mean climate relative to BCC-CSMl.l,particularly on regional scales.     

复杂地形下地面观测资料同化II. 模式地形与观测站地形高度差异代表性误差

第I部分研究结果(徐枝芳等,2007)表明模式与实际观测站地形高度差异对地面观测资料同化效果有较大影响。此文在MM5_3DVAR同化系统中利用近地层相似理论将地面观测资料进行直接三维变分同化分析,考虑模式与实际观测站地形高度差异对同化效果的影响,提出在地面观测误差中增加地形代表性误差来解决这个问题。研究结果表明:地面资料同化分析时,在其观测误差中加入一项新的误差——地形代表性误差,能较好地解决地面资料同化分析中模式与观测站地形高度差异问题;地面资料参与同化分析,在观测误差中加入与模式和实际观测站地形高度差异大小相关的地形代表性误差时,地面观测值对分析值的影响随着地形高度差异代表性误差的加入而减小,同时又部分地将地面观测信息通过变分分析融进分析场,使得低层分析更接近真实场,且地面资料利用率更高,24小时降水数值预报(模拟)的效果较好。     

Variability of soil moisture and its relationship with surface albedo and soil thermal parameters over the Loess Plateau

Data from July 2006 to June 2008 observed at SACOL(Semi-Arid Climate and Environment Observatory of Lanzhou University,35.946°N,104.137°E,elev.1961 m),a semi-arid site in Northwest China,are used to study seasonal variability of soil moisture,along with surface albedo and other soil thermal parameters, such as heat capacity,thermal conductivity and thermal diffusivity,and their relationships to soil moisture content.The results indicate that surface albedo decreases with increases in soil moisture content,s...     

Material flow analysis for an industry—A case study in packaging

The basic materials used in packaging are glass, metals (primarily aluminum and steel), an ever-growing range of plastics, paper and paperboard, wood, textiles for bags, and miscellaneous other materials (such as glues, inks, and other supplies). They are fabricated into rigid, semirigid, or flexible containers. The most common forms of these containers include cans, drums, bottles, cartons, boxes, bags, pouches, and wraps. Packaging products are, for the most part, low cost, bulky products that are manufactured close to their customers. There is virtually no import or export of packaging products. A material flow analysis can be developed that looks at all inputs to an industrial sector, inventories the losses in processing, and tracks the fate of the material after its useful life. An example is presented that identifies the material inputs to the packaging industry, and addresses the ultimate fate of the materials used.Correspondence should be directed to Earle B. Amey, U.S. Geological Survey, National Center 983, Reston, Virginia 20192.