一种带自由面的三维船体贴体网络的数值生成

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的     

冲绳海槽热流机制浅析

冲绳海槽是一个高热流区，平均热流值极高，但不均匀，实测最小值与最大值相差三个数量级以上，结合海槽地区的构造和地球物理特征，探讨了导致这一高而分散热流特征的多种因素。包括异常壳幔结构。海底热液循环以及地下水对流等，并分析了相应的控制机制。     

分层海洋的内孤立波

本文从流体力学基本方程组出发,在非地转条件下导得了分层海洋的内孤立波方程—Kbv和mKdv方程,证实了在非地转条件下,一类海洋非线性波动是可以严格满足内孤立波方程的。在地转条件下采用f平面近似导出了KdV方程的演化形式一有源KdV方程,地转的影响含于源项中。由初步的分析得出,f对KdV方程的影响是微弱的。由已得的KdV和mKdV方程的解可知,内孤立波与线性波有着本质差别。     

厦门岛市区机动车流的航空遥感监测

本文介绍了厦门岛市区机动车流遥感监测的实施目的和方法，通过航空影像有关题信息解译与实例、专题图件编制以及统计资料的对比分析，认为：目前厦门岛市区交通主要存在着机动车增长过速、道路狭窄和会计室场少且分布不合理等三个方面的问题，文中提出了相应的建议。体现了航空遥感对于中、大比例尺城市动态监测快速有效的特点。     

两参量的海面阻力系数模式的探讨

从风浪的能量平衡方程出发，引进若干风要素与波要素以及波要素之间的定性关系，经演算可导出海面阻力系数（Ｃｐ）或是风速（Ｕ）和波龄（β）或是Ｕ和波高（Ｈ）的函数，然后沿用最小二乘法，终将得出４组１２个回归方程。当β（或β）或Ｈ为某一给定值，惟有Ｕ为唯一参量时，所提各式均可简化为非线性方程：ＣＤ＝ａ＋ｂ，Ｕ＋ｃ．Ｕ＾２；式中ａ，ｂ和ｃ为三个经验系数，就所检验的例子而言，本文的结果与实际的符合前人的为好。     

A Reconstruction of Observed Profiles in the Sea East of Japan Using Vertical Coupled Temperature-Salinity EOF Modes

It is important to estimate hard-to-observe parameters in the ocean interior from easy-to-observe parameters. This study therefore demostrates a reconstruction of observed temperature and salinity profiles of the sea east of Japan (30°≈40°N, 140°≈150°E). The reconstruction was done by estimating suboptimal state from several values of the observed profiles and/or sea surface dynamic height (SDH) calculated from the profiles. The estimation used a variational method with vertical coupled temperature-salinity empirical orthogonal function (EOF) modes. Profiles of temperature and salinity in the subtropical region are effectively reconstructed from in situ temperature profile data, or sea surface temperature (SST) and SDH. For example, the analyzed temperature field from SST and SDH has an accuracy to within 1°C in the subtropical region. Salinity in the sea north of Kuroshio, however, is difficult to estimate because of its complex variability which is less correlated with temperature than in the subtropical region. Sea surface salinity is useful to estimate the subsurface structure. We also show the possibility that the estimation is improved by considering nonlinearity in the equation calculating SDH from temperature and salinity analysis values in order to examine the misfit between analysis and observation. Analysis using TOPEX/POSEIDON altimetry data instead of SDH was also performed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

The dimensions of sand ripples in full-scale oscillatory flows

New large-scale experiments have been carried out in two oscillatory flow tunnels to study ripple regime sand suspension and net sand transport processes in full-scale oscillatory flows. The paper focuses on ripple dimensions and the new data are combined with existing data to make a large dataset of ripple heights and lengths for flows with field-scale amplitudes and periods. A feature of the new experiments is a focus on the effect of flow irregularity. The combined dataset is analysed to examine the range of hydraulic conditions under which oscillatory flow ripples occur, to examine the effects of flow irregularity and ripple three-dimensionality on ripple dimensions and to test and improve existing methods for predicting ripple dimensions.The following are the main conclusions. (1) The highest velocities in a flow time-series play an important role in determining the type of bedform occurring in oscillatory flow. Bedform regime is well characterised by mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth peak velocities in the case of irregular flow. (2) For field-scale flows, sand size is the primary factor determining whether equilibrium ripples will be 2D or 3D. 2D ripples occur when the sand D₅₀ ≥ 0.30 mm and 3D ripples occur when D₅₀ ≤ 0.22 mm (except when the flow orbital diameter is low). (3) Ripple type (2D or 3D) is the same for regular and irregular flows and ripple dimensions produced by equivalent regular and irregular flows follow a similar functional dependence on mobility number, with mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth velocities in the case of irregular flow. For much of the ripple regime, ripple dimensions have weak dependency on mobility number and ripple dimensions are similar for regular and irregular flows with the same flow orbital amplitude. However, differences in ripples produced by equivalent regular and irregular flows become significant at the high mobility end of the ripple regime. (4) Ripple dimensions predicted using the Wiberg and Harris formulae are in poor agreement with measured ripple dimensions from the large-scale experiments. Predictions based on the Mogridge et al. and the Nielsen formulae show better overall agreement with the data but also show systematic differences in cases of 3D ripples and ripples generated by irregular flows. (5) Based on the combined large-scale data, modifications to the Nielsen ripple dimension equations are proposed for the heights and lengths of 2D ripples. The same equations apply to regular and irregular flows, but with mobility number appropriately defined. 3D ripples are generally smaller than 2D ripples and estimates of 3D ripple height and length may be obtained by applying multipliers of 0.55 and 0.73 respectively to the 2D formulae. The proposed modified Nielsen formulae provide an improved fit to the large-scale data, accounting for flow irregularity and ripple three-dimensionality.     

用样条函数计算结果研究冲绳海槽热源机制

对冲绳海槽１９８４－１９９０年的实测热流值，利用数字滤波方法计算，得到反映该区深部地壳热状态的区域热流值为８０－１６０ｍＷ／ｍ＾２，用Ｂ样条函数法对其作数值模拟，计算出海槽地温场模式，并以此研究冲绳海槽海底高热流的形成机制，得出冲绳海槽热流值的区域性变化与綦中地质构造格局呈正相关，高热流是该区现代构造活动所致，其明显特征是地壳减薄，地幔上拱等结论。