附设黏滞阻尼器的传统风格建筑混凝土梁-柱节点动力循环荷载累积损伤分析

为研究附设黏滞阻尼器的传统风格建筑混凝土梁-柱节点地震损伤演化规律,进行6个该类型构件的动力荷载试验,并分别采用位移型、能量型及位移-能量混合型损伤模型对其进行全过程评价,采用Park-Ang模型分析试件黏滞阻尼器型号、试件类型等因素对混凝土传统风格建筑梁柱节点损伤行为的影响。研究结果表明：附设黏滞阻尼器可显著提升传统风格建筑节点的承载能力、延性性能及耗能能力,结构的抗震性能得到较大幅度的提升;Park-Ang损伤模型与Banon损伤模型适用于传统风格建筑节点损伤演化规律的描述,建议对该类型节点的损伤规律表征选用该损伤模型。黏滞阻尼器型号可在一定程度上影响传统风格建筑的损伤演化发展;设计阻尼力大的试件虽然延性有所提高,但受荷过程中累积损伤也较大。     

Real‐time hybrid testing of a smart base isolation system

Real‐time hybrid testing is a very effective technique for evaluating the dynamic responses of rate‐dependent structural systems subjected to earthquake excitation. A smart base isolation system has been proposed by others using conventional low‐damping isolators and controllable damping devices such as magnetorheological (MR) dampers to achieve specified control target performance. In this paper, real‐time hybrid tests of a smart base isolation system are conducted. The simulation is for a base‐isolated two‐degrees‐of‐freedom building model where the superstructure and the low‐damping base isolator are numerically simulated, and the MR damper is physically tested. The target displacement obtained from the step‐by‐step integration of the numerical substructure is imposed on the MR damper, which is driven by three different control algorithms in real‐time. To compensate the actuator delay and improve the accuracy of the test, an adaptive phase‐lead compensator is implemented. The accuracy of each test is investigated by using the root mean square error and the tracking indicator. Experimental results demonstrate that the hybrid testing procedure using the proposed actuator compensation techniques is effective for investigating the control performance of the MR damper in a smart base isolation system. Copyright © 2013 John Wiley & Sons, Ltd.     

加装减震装置的特高压复合材料支柱绝缘子振动台试验研究

为研究复合材料电气设备抗震性能与减震技术应用效果,对特高压复合支柱材料绝缘子进行了抗震与减震地震模拟振动台试验,研究了设备动力特性和地震响应。白噪声试验结果表明:该复合材料支柱绝缘子在安装减震器后第1阶频率由1.11 Hz降低到1.04 Hz,表明减震器对设备结构的整体刚度影响较小。3种地震波试验结果表明:设备地震响应与地震动峰值加速度在抗震试验中呈线性变化关系,但在减震试验的应力响应中呈非线性变化关系;设备安装减震器后,试验地震动峰值加速度越大,减震效率越高,最高达到了66.32%;而位移减震率与地震动峰值加速度无明显规律,最大位移减震率为49.36%。试验研究结果表明:试验设备安装减震器后抗震性能得到显著提升,为复合材料电气设备抗震性能研究与减震技术应用提供了参考依据。     

Vehicle effects on seismic response of a simple‐span bridge during shake tests

Presence of vehicles on a bridge has been observed many times during past earthquakes. Although in practice, the engineers may or may not include the live load contribution to seismic weight in design, current bridge design codes do not specify a certain guideline. A very limited research has been conducted to address this issue from design point of view. The focus of this research is to experimentally assess the effect of a vehicle on the seismic response of a bridge through a large‐scale model. In this scope, a 12‐meter long bridge, having a one lane deck with concrete slab on steel girders, has been shaken under five different ground motions obtained from recent earthquakes that occurred in Turkey, in its transverse direction, both with and without a vehicle on top of the deck. The measured results have indicated that top slab transverse acceleration and bearing displacements can reduce up to 18.7% in presence of a vehicle during seismic tests, which is an indication of reduction in substructure forces. The main reason for the reduction in seismic response of the bridge in the presence of live load can be ascribed to the increase in damping of the system due to mass damper‐like action induced by the vehicle. This beneficial effect cannot be observed in vertical seismic response. Copyright © 2014 John Wiley & Sons, Ltd.     

采用软钢阻尼器连接的L形装配式剪力墙抗震性能试验研究

基于"强水平缝弱竖向缝"的设计理念,对采用软钢阻尼器直接连接腹板墙和翼缘墙的L形装配式剪力墙试件进行低周反复荷载试验。试验结果表明试件的整体工作性能良好,其位移延性系数均大于2.6,具有良好的变形性能;阻尼器平面内工作性能良好,能够实现屈服耗能。设计中应考虑阻尼器的屈服力对单片墙肢轴压比的影响,以满足规范对试件轴压比的要求,同时避免试件在两个加载方向的承载力产生较大差异。     

不规则高层结构基于新型电磁惯性质量阻尼器的半主动控制

为了研究新型电磁惯性质量阻尼器(Electromagnetic Inertial Mass Damper,EIMD)应用于偏心高层结构振动控制工程的可行性,鉴于半主动控制技术的优点,基于LQR主动控制算法,提出一种可行的EIMD-偏心高层结构半主动控制策略,同时研究EIMD在结构每层中安装位置不同对于控制偏心高层结构扭...