Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.     

青藏高原地区能量水分循环：地表能量平衡和湍流热通量

文章给出了青藏高原能量水分循环研究的概况和总结，着重估计了能量平衡各分项和湍流热通量等。在能量平衡的计算基础上，尽管能量不平衡的原因解释仍有争论并且没有解决，但我们揭示了GAME/Tibet试验观测资料中能量不平衡现象。我们发现估算的潜热通量比实际观测的要高许多。然而，根据能量平衡假设的计算结果和SEBS的估算一致性很好。在此基础上可以归纳出差异主要由GAME/Tibet试验观测资料中能量不平衡引起，潜热通量的实际观测可能偏小。     

两类ENSO事件赤道太平洋次表层海温异常的演变特征

基于美国马里兰大学提供的海洋同化(SODA)月平均资料,用个例和合成分析方法,剖析了两类ENSO事件赤道太平洋海温异常演变特征。结果指出,东部型ENSO事件的初始海温异常源来自赤道西太平洋次表层,海温异常中心沿气候温跃层向东向上传送,至赤道东太平洋表层形成ENSO事件。东部型ENSO冷暖事件互为初始场,在形成某一位相的ENSO事件的过程中也同时为相反位相的ENSO事件准备条件。中部型ENSO事件的初始海温异常源出现在赤道中太平洋次表层,海温异常中心沿气候温跃层向东向上传送至赤道中东太平洋表层形成ENSO事件。中部型ENSO事件多在前次事件减弱中断后出现。     

Modeling studies of the upper ocean response to a tropical cyclone

A coupled ocean and boundary layer flux numerical modeling system is used to study the upper ocean response to surface heat and momentum fluxes associated with a major hurricane, namely, Hurricane Dennis (July 2005) in the Gulf of Mexico. A suite of experiments is run using this modeling system, constructed by coupling a Navy Coastal Ocean Model simulation of the Gulf of Mexico to an atmospheric flux model. The modeling system is forced by wind fields produced from satellite scatterometer and atmospheric model wind data, and by numerical weather prediction air temperature data. The experiments are initialized from a data assimilative hindcast model run and then forced by surface fluxes with no assimilation for the time during which Hurricane Dennis impacted the region. Four experiments are run to aid in the analysis: one is forced by heat and momentum fluxes, one by only momentum fluxes, one by only heat fluxes, and one with no surface forcing. An equation describing the change in the upper ocean hurricane heat potential due to the storm is developed. Analysis of the model results show that surface heat fluxes are primarily responsible for widespread reduction (0.5°–1.5°C) of sea surface temperature over the inner West Florida Shelf 100–300 km away from the storm center. Momentum fluxes are responsible for stronger surface cooling (2°C) near the center of the storm. The upper ocean heat loss near the storm center of more than 200 MJ/m² is primarily due to the vertical flux of thermal energy between the surface layer and deep ocean. Heat loss to the atmosphere during the storm’s passage is approximately 100–150 MJ/m². The upper ocean cooling is enhanced where the preexisting mixed layer is shallow, e.g., within a cyclonic circulation feature, although the heat flux to the atmosphere in these locations is markedly reduced.     

Evaporation over a Heterogeneous Land Surface: EVA_GRIPS and the LITFASS-2003 Experiment—An Overview

The Evaporation at Grid/Pixel Scale (EVA_GRIPS) project was realised in order to determine the area-averaged evaporation over a heterogeneous land surface at the scale of a grid box of a regional numerical weather prediction or climate model, and at the scale of a pixel of a satellite image. EVA_GRIPS combined surface-based and airborne measurements, satellite data analysis, and numerical modelling activities. A mesoscale field experiment, LITFASS-2003, was carried out in the heterogeneous landscape around the Meteorological Observatory Lindenberg (MOL) of the German Meteorological Service in May and June, 2003. The experiment was embedded in the comprehensive, operational measurement program of the MOL. Experimental determination of surface fluxes on a variety of spatial scales was achieved by employing micrometeorological flux stations, scintillometers, a combination of ground-based remote sensing instruments, and the Helipod, a turbulence probe carried by a helicopter. Surface energy fluxes were also derived from satellite data. Modelling work included the use of different Soil–Vegetation–Atmosphere Transfer schemes, a large-eddy simulation model and three mesoscale atmospheric models. The paper gives an overview on the background of EVA_GRIPS, and on the measurements and meteorological conditions during LITFASS-2003. A few general results are discussed.     

Processing and quality control of flux data during LITFASS-2003

Different aspects of the quality assurance and quality control (QA/QC) of micrometeorological measurements were combined to create a comprehensive algorithm which was then applied to experimental data from LITFASS-2003 (Lindenberg Inhomogeneous Terrain—Fluxes between Atmosphere and Surface: a long term Study). Eddy-covariance measurements of the latent heat flux were the main focus of the QA/QC efforts. The results of a turbulence sensor intercomparison experiment showed deviations between the different eddy-covariance systems on the order of 15%, or less than 30 W m⁻², for the latent heat flux and 5%, or less than 10 W m⁻², for the sensible heat flux. In order to avoid uncertainties due to the post-processing of turbulence data, a comprehensive software package was used for the analysis of experimental data from LITFASS-2003, including all necessary procedures for corrections and quality control. An overview of the quality test results shows that for most of the days more than 80% of the available latent heat flux data are of high quality so long as there are no instrumental problems. The representativeness of a flux value for the target land-use type was analysed using a stochastic footprint model. Different methods to calculate soil heat fluxes at the surface are discussed and a sensitivity analysis is conducted to select the most robust method for LITFASS-2003. The lack of energy balance closure, which was found for LITFASS-2003, can probably be attributed to the presence of low-frequency flux contributions that cannot be resolved with an averaging time of 30 min. Though the QA/QC system has been developed for the requirements of LITFASS-2003, it can also be applied to other experiments dealing with similar objectives.     

The effect of mountainous topography on moisture exchange between the “surface” and the free atmosphere

Typical numerical weather and climate prediction models apply parameterizations to describe the subgrid-scale exchange of moisture, heat and momentum between the surface and the free atmosphere. To a large degree, the underlying assumptions are based on empirical knowledge obtained from measurements in the atmospheric boundary layer over flat and homogeneous topography. It is, however, still unclear what happens if the topography is complex and steep. Not only is the applicability of classical turbulence schemes questionable in principle over such terrain, but mountains additionally induce vertical fluxes on the meso-γ scale. Examples are thermally or mechanically driven valley winds, which are neither resolved nor parameterized by climate models but nevertheless contribute to vertical exchange. Attempts to quantify these processes and to evaluate their impact on climate simulations have so far been scarce. Here, results from a case study in the Riviera Valley in southern Switzerland are presented. In previous work, measurements from the MAP-Riviera field campaign have been used to evaluate and configure a high-resolution large-eddy simulation code (ARPS). This model is here applied with a horizontal grid spacing of 350 m to detect and quantify the relevant exchange processes between the valley atmosphere (i.e. the ground “surface” in a coarse model) and the free atmosphere aloft. As an example, vertical export of moisture is evaluated for three fair-weather summer days. The simulations show that moisture exchange with the free atmosphere is indeed no longer governed by turbulent motions alone. Other mechanisms become important, such as mass export due to topographic narrowing or the interaction of thermally driven cross-valley circulations. Under certain atmospheric conditions, these topographical-related mechanisms exceed the “classical” turbulent contributions a coarse model would see by several times. The study shows that conventional subgrid-scale parameterizations can indeed be far off from reality if applied over complex topography, and that large-eddy simulations could provide a helpful tool for their improvement.     

京津冀地区地下流体数字化观测数据完整率及其地震前兆监测有效性的调查与分析

在北京、天津、河北二市一省部分地区抽样调查了13口井水位、11口井水温、5口井气氡、2口井气汞、2口井氦气数字化观测现状,统计分析了其数据完整率及观测断记次数与数据缺失量;在调查观测数据断记及其原因的基础上,进一步统计分析了数据缺失的主要原因,分析了连续完整的数据系列在地震前兆监测中的有效性。研究结果表明,除了氦气之外,水位、水温、气氡与气汞4大主要测项的运行,总体上是正常的;但多数井多数测项存在断记与数据缺失的问题,其主要原因是仪器故障与运行不正常,其次是停电、通信线路故障与雷击,此外还存在原因不明的断记与缺数的问题;以井统计,约有1/2的水位与水温观测井可在地震中期与短临前兆中发挥作用,而气氡、气汞等化学量观测只在地震短临前兆监测中,约有一半的井有可能发挥一定效能。     

The energy balance experiment EBEX-2000. Part II: Intercomparison of eddy-covariance sensors and post-field data processing methods

The eddy-covariance method is the primary way of measuring turbulent fluxes directly. Many investigators have found that these flux measurements often do not satisfy a fundamental criterion—closure of the surface energy balance. This study investigates to what extent the eddy-covariance measurement technology can be made responsible for this deficiency, in particular the effects of instrumentation or of the post-field data processing. Therefore, current eddy-covariance sensors and several post-field data processing methods were compared. The differences in methodology resulted in deviations of 10% for the sensible heat flux and of 15% for the latent heat flux for an averaging time of 30 min. These disparities were mostly due to different sensor separation corrections and a linear detrending of the data. The impact of different instrumentation on the resulting heat flux estimates was significantly higher. Large deviations from the reference system of up to 50% were found for some sensor combinations. However, very good measurement quality was found for a CSAT3 sonic together with a KH20 krypton hygrometer and also for a UW sonic together with a KH20. If these systems are well calibrated and maintained, an accuracy of better than 5% can be achieved for 30-min values of sensible and latent heat flux measurements. The results from the sonic anemometers Gill Solent-HS, ATI-K, Metek USA-1, and R.M. Young 81000 showed more or less larger deviations from the reference system. The LI-COR LI-7500 open-path H₂O/CO₂ gas analyser in the test was one of the first serial numbers of this sensor type and had technical problems regarding direct solar radiation sensitivity and signal delay. These problems are known by the manufacturer and improvements of the sensor have since been made. The National Center for Atmospheric Research is supported by the National Science Foundation.     

Modelling the dynamics and thermodynamics of volcanic degassing

 The rates of passive degassing from volcanoes are investigated by modelling the convective overturn of dense degassed and less dense gas-rich magmas in a vertical conduit linking a shallow degassing zone with a deep magma chamber. Laboratory experiments are used to constrain our theoretical model of the overturn rate and to elaborate on the model of this process presented by Kazahaya et al. (1994). We also introduce the effects of a CO₂–saturated deep chamber and adiabatic cooling of ascending magma. We find that overturn occurs by concentric flow of the magmas along the conduit, although the details of the flow depend on the magmas' viscosity ratio. Where convective overturn limits the supply of gas-rich magma, then the gas emission rate is proportional to the flow rate of the overturning magmas (proportional to the density difference driving convection, the conduit radius to the fourth power, and inversely proportional to the degassed magma viscosity) and the mass fraction of water that is degassed. Efficient degassing enhances the density difference but increases the magma viscosity, and this dampens convection. Two degassing volcanoes were modelled. At Stromboli, assuming a 2 km deep, 30% crystalline basaltic chamber, containing 0.5 wt.% dissolved water, the ∼700 kg s^–1 magmatic water flux can be modelled with a 4–10 m radius conduit, degassing 20–100% of the available water and all of the 1 to 4 vol.% CO₂ chamber gas. At Mount St. Helens in June 1980, assuming a 7 km deep, 39% crystalline dacitic chamber, containing 4.6 wt.% dissolved water, the ∼500 kg s^–1 magmatic water flux can be modelled with a 22–60 m radius conduit, degassing ∼2–90% of the available water and all of the 0.1 to 3 vol.% CO₂ chamber gas. The range of these results is consistent with previous models and observations. Convection driven by degassing provides a plausible mechanism for transferring volatiles from deep magma chambers to the atmosphere, and it can explain the gas fluxes measured at many persistently active volcanoes. Received: 26 September 1997 / Accepted: 11 July 1998