南海西沙海槽典型地震相识别与分析

西沙海槽区作为气水合物的可能聚集地越来越受到关注。浅析地震相分析方法,通过地震相标志的识别,归纳出自中中新世以来,西沙海槽发育有8种地震相：S形前积地震相、斜交前积地震相、下超型前积地震相、丘状地震相、杂乱地震相、空白地震相、透镜状地震相和席状地震相。较细致地描述了各种地震相的反射特征,并结合研究区的沉积背景,对不同地震相的沉积学特征做出了合理解释。     

利用GPS数据研究南北地震带北段近期地壳水平形变特征

采用中国地震局"陆态网络"GPS基准站和流动站观测数据,利用MIT的开源软件GAMIT/GLOBK解算南北地震带北段(33°~42°N,97°~110°E),特别是六盘山地区、祁连地块、银川地堑1999年以来在欧亚框架下、以鄂尔多斯块体作为参考的GPS速度场。计算南北地震带北段5条断裂两侧50~350km范围内各站垂直/平行于断裂走向的速度投影,以及14个基准站18条基线2010年以来的长度时间序列,试图进一步估计关心区域的应力积累情况,探索断层闭锁段。结合地震活动性,认为南北地震带北段未来50年有发生M8地震的可能性;该段1900年以来的第4个M6、M7地震活跃期可能已经拉开序幕,未来2年有发生M7以上地震的可能性;祁连断裂带、海原断裂、西秦岭北缘地震带具备发生M6和M7地震的优先条件,尤其是海原断裂。     

芦山地震冶勒大坝强震监测资料分析

冶勒沥青混凝土心墙堆石坝最大坝高为124.5 m,坝址区地震烈度高,地质条件复杂,两岸坝基条件严重不对称。大坝上布设了9台强震仪组成的强震监测台阵,曾获得2008年汶川地震和攀枝花地震的大坝强震监测记录。2013年4月20日四川省雅安市芦山县发生里氏7.0级地震,冶勒大坝距震中约212.5 km,坝址区震感较为强烈,强震监测台阵获得了此次地震较为完整的有效记录。对芦山地震主震记录进行时域分析和频谱分析,总结冶勒大坝在芦山地震中的动力反应规律,并与汶川地震时坝体动力反应进行对比分析。研究表明,芦山地震主震时冶勒大坝最大加速度记录为47.043 cm/s2,最长持续时间为76.98 s,坝顶动力放大效应明显;芦山和汶川地震时大坝动力反应规律的差异与地震波频谱特性及大坝自振特性等密切相关。总体而言,冶勒大坝在震后运行安全稳定,芦山地震未对冶勒大坝造成明显不利影响。     

Evolution of the eastern margin of Korea: Constraints on the opening of the East Sea (Japan Sea)

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the eastern Korean margin that led to the separation of the southwestern Japan Arc. The eastern Korean margin is rimmed by fundamental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau that is a continental fragment extended and partially segmented from the Korean Peninsula. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and considerably symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Analysis of rift fault patterns suggests that rifting at the Korean margin was primarily controlled by normal faulting resulting from extension rather than strike-slip deformation. Two extension directions for rifting are recognized: the Onnuri and Hupo Basins were rifted in the east-west direction; the Bandal Basin in the east–west and northwest–southeast directions, suggesting two rift stages. We interpret that the east–west direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated southeastward repeatedly from the Japan Basin toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed the direction to the south, resulting in east–west extension to create the rift basins at the Korean margin. The northwest–southeast direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the Korea Plateau; after breakup the southwestern Japan Arc separated in the southeast direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the northwest direction. No significant volcanism was involved in initial rifting. In contrast, the inception of sea floor spreading documents a pronounced volcanic phase which appears to reflect asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin, although it is in a back-arc setting, can be explained by the processes occurring at the passive continental margin with magmatism influenced by asthenospheric upwelling.     

Statistical tests for regional seismic phase characterizations

In seismic analysis some assumptions are often made aboutthe data, e.g. stationarity and Gaussianity. This is not obvious for all realseismic data. Here, we use statistical tests for characterization of regionalseismic data. We apply tests for stationarity, symmetry, linearity, andtime-reversibility. In the analysis we use twelve regional seismic events inFennoscandia recorded with the seismic small-aperture arrays NORESS,ARCESS and FINESA at hypocentral distances in the range from 160 to1580 km. For the tests we use the regional phases Pn, secondary P, Sn and Lg-phases and the preceding noise. Two of the eventsare explosions, two are rockbursts and eight are earthquakes. Theperformance and possibilities of using statistical tests based on bispectra, asa complementary tool for conventional analysis of seismic phases isdemonstrated. The preceding noise recorded before the first onset of theP-wave for the twelve events is tested to be spatially stationarybetween each channel within each array and temporal stationary in 21consecutive time windows of 3.2 sec each. Also, the preceding noise issymmetric and linear. The seismic phases defined by the symmetry test asnon-Gaussian (not symmetric) are all linear. This means a linear model canbe used to characterize both the noise and the phases. The first P-phase for the two explosions is characterized as non-Gaussian at thethree arrays. For all 36 possibly first P-phase arrivals at the three arraystations, 23 are non-Gaussian. The second P-phase is non-Gaussian at13 of 36 data records, the S-phase at eleven of 36 and the Lg-phase at nine of 36. For all the four phases more than 32 of possible36 are time-reversible.     

叠后地震属性分析在油气田勘探开发中的应用

地震属性分析技术一直是地震特殊处理和解释的主要研究内容.随着油气勘探开发的发展,地震属性分析技术已经成为油藏地球物理研究的核心内容,是勘探地震与开发地震之间纽带.本文针对鄂尔多斯盆地的低幅度构造、低孔隙、低渗透率、致密性隐蔽油气藏的特点,综合应用相干数据体分析、地震相自动分类定性识别砂体厚度、地震振幅属性分析、频谱分解、多井约束的储层叠后反演等叠后属性分析技术,探索了一套适合该区油气特征的储层横向预测及油气识别模式.为该区油气勘探开发,储量计算提供可靠依据.同时也为隐蔽性油气藏的勘探开发积累了经验.     

利用水库诱发地震数据库快速为政府部门提供汶川M_S 8.0地震灾害对策

根据水库诱发地震的发震相关因素和特点,确定出水库诱发地震数据库元参数和库结构,并通过资料收集初步建立起水库诱发地震数据库,它包含了全世界水库诱发地震震例1 31个、中国大Ⅰ型水库110座、中国大Ⅱ型水库200座和坝高达100m的水库70座,并具有快速查询、统计、图示等简单功能。在汶川M_S8.0地震发生后的第2天,应地震主管部门的要求及时给出了四川省及附近区域已建大型水库的基本信息及分布。可见,水库诱发地震数据库是有助于政府部门进行地震快速对策的一种有效工具     

中国大陆科学钻探先导孔零偏VSP资料解释

用六级三分量检波器在中国大陆科学钻探先导孔中实施了零偏VSP测量.数据处理结果表明,中国大陆科学钻探孔区超高压变质岩石的地震波速度主要介于4500～7000m/s之间,显著高于一般的沉积岩地区,而且随深度变化不明显.声波测井速度系统地稍低于VSP层速度,可能是由于井壁处岩石的完整性受到破坏而造成的.地震波速度与岩石密度和岩性存在明确的对应关系,榴辉岩的密度和地震波速度均显著高于片麻岩类岩石;由榴辉岩退变生成的斜长角闪岩类岩石,其密度和地震波速度均呈现出较大的变化,主要与其退变质程度有关;超基性岩中的裂隙系统导致其密度和地震波速度大幅度下降.由于榴辉岩与其他岩石类型之间存在较大的波阻抗差异,因此用零偏VSP资料标定该区地震波的地质层位是有效的.关于地震波反射的原因,通过综合研究地震波(包括反射纵波、上行转换横波、井筒波)的特征、岩石速度和密度分布以及井径变化,认为主要是岩性分界面、韧性剪切带和断裂(带),但还有一些因素尚待进一步研究.     

佘山地震台防雷技术研究与应用

在详细分析雷电灾害特征的基础上,阐述了防雷工作的主要技术手段。并针对地震台站的构成特点,研究了台站综合防雷系统的设计方法和技术措施。同时,以余山地震台为例,具体说明了防雷措施的应用方法及应用效果。     

新疆测震台网地震编目工作改进

针对新疆地震多、地域广、台站数量多的特点,结合新疆地震台网地震编目现状和JOPENS6.0系统的远程波形调用功能,提出以有人值守台为核心均衡考虑工作量、便于运行维护和明确编目职责的原则划分子台网进行编目工作,并研究其可行性。结果表明,有人值守台站进行编目工作时,在带宽越宽的行业网内,操作流程越流畅;按照制定的子台网编目原则,编目效率得到提高。该模式在一定程度上可应用到大震应急时地震序列处理工作。