A Probabilistic Model for Fatigue Crack Propagation Analysis

A simple probabilistic model for predicting crack growth behavior under random loading is pre-sented.In the model,the parameters c and m in the Paris-Erdogan Equation are taken as random variables,and their stochastic characteristic values are obtained through fatigue crack propagation tests on an offshorestructural steel under constant amplitude loading.Furthermore,by using the Monte Carlo simulation tech-nique,the fatigue crack propagation life to reach a given crack length is predicted.The tests are conducted toverify the applicability of the theoretical prediction of the fatigue crack propagation.     

低效用海评价指标体系构建研究——以浙江省普陀区填海用海为例

本文旨在针对当前海域节约集约利用的要求下,缺乏低效用海客观评价体系的现状。采用层次分析法和德尔菲专家打分法等技术,在DPSIR框架下,从指标选取、权重设立以及综合评价等方面构建低效用海评价指标体系,并在浙江省普陀区进行应用示范。结果显示,普陀区41个填海项目中,有17个项目评价等级为优,有4个评价等级为良好。等级为一般和较差的项目各10个,占评价项目48.7%。这表明普陀区填海项目中批而未填、填而未建或闲置用海情况较为明显。本研究在指标体系构建和实际应用方面具有创新性和先进性,对于低效用海的节约集约利用具有一定的实际意义和应用价值。     

Vibration of vertical rectangular plate in contact with water on one side

In this paper, the vibratory characteristics of a rectangular plate in contact with water on one side are studied. The elastic plate is considered to be a part of a vertical rectangular rigid wall in contact with water, the edges of which are elastically restrained and parallel to those of the rigid wall. The location and size of the plate on the rigid wall may vary arbitrarily. The water with a free surface is in a rectangular domain infinite in the length direction. The effects of free surface waves, compressibility of the water and the hydrostatic water pressure are neglected in the analysis. An analytical‐Ritz method is developed to analyse the interaction of the plate–water system. First of all, by using the method of separation of variables and the method of Fourier series expansion, the exact expression of the motion of water is derived in the form of integral equations including the dynamic deformation of the plate. Then the Rayleigh–Ritz approach is used to derive the eigenfrequency equation of the system via the variational principle of energy. By selecting beam vibrating functions as the admissible functions of the plate, the added virtual mass incremental (AVMI) matrices for plate vibration are obtained. The convergency studies are carried out. The effects of some parameters such as the depth and width of water, the support stiffnesses, location and aspect ratio of the plate and the plate–water size and density ratios on the eigenfrequencies of the plate–water system are investigated. Several numerical examples are given. The validity of AVMI factor approach is also confirmed by comparing the AVMI factor solutions with the analytical‐Ritz solutions. The results show that the approach presented here can also be used as excellent approximate solutions for rectangular plates in contact with water of infinite width and/or infinite depth. Copyright © 2000 John Wiley & Sons, Ltd.     

Effects of different spatial distributions of physical soil crusts on runoff and erosion on the Loess Plateau in China

The response of runoff and erosion to soil crusts has been extensively investigated in recent decades. However, there have been few attempts to look at the effects of spatial configuration of different soil crusts on erosion processes. Here we investigated the effects of different spatial distributions of physical soil crusts on runoff and erosion in the semi‐arid Loess Plateau region. Soil boxes (1.5 m long × 0.2 m wide) were set to a slope of 17.6% (10°) and simulated rainfall of 120 mm h^?1 (60 minutes). The runoff generation and erosion rates were determined for three crust area ratios (depositional crust for 20%, 33%, and 50% of the total slope) and five spatial distribution patterns (depositional crust on the lower, lower‐middle, middle, mid‐upper, and upper slope) of soil crusts. The reduction in sediment loss (‘sediment reduction’) was calculated to evaluate the effects of different spatial distributions of soil crusts on erosion. Sediment yield was influenced by the area ratio and spatial position of different soil crusts. The runoff rate reached a steady state after an initial trend of unsteadily increasing with increasing rainfall duration. Sediment yield was controlled by detachment limitation and then transport limitation under rainfall. The shifting time of erosion from a transport to detachment‐limiting regime decreased with increasing area of depositional crust. No significant differences were observed in the total runoff among treatments, while the total sediment yield varied under different spatial distributions. At the same area ratio, total sediment yield was the largest when the depositional crust was on the upper slope, and it was smallest when the crust was deposited on the lower slope. The sediment reduction of structural crust (42.5–66.5%) was greater than that of depositional crust (16.7–34.3%). These results provide a mechanistic understanding of how different spatial distributions of soil crusts affect runoff and sediment production. Copyright © 2017 John Wiley & Sons, Ltd.     

珠江三角洲海相沉积软土压缩和剪切变形特性试验研究

为了研究近代海相沉积软土的变形特征,本文对珠江三角洲河口地区的全新世海相沉积的软土进行了室内单轴压缩与不同围压下作用下的三轴固结不排水(CU)、不固结不排水(UU)的剪切试验。试验结果表明:原状土和重塑土样的孔隙比随压力的增大而下降,且与加压方式有密切关系,加压幅度越小,土的扰动破坏越小;原状土样固结系数随着压力增加而递减,整体近似符合指数函数分布,重塑土样固结系数随着压力增加逐渐增大,整体近似符合线性函数分布。在相同的固结压力下,原状土样的强度低于重塑土样的强度。土样的应力应变曲线为应变硬化型,且围压对重塑土的影响小于原状土。     

建筑用玻化微珠保温混凝土剪力墙抗震结构设计

传统方法主要通过导热系数低的材料和增加墙体厚度来达到抗震效果。该方法不仅浪费能源而且抗震性能较差,因此对建筑用玻化微珠保温混凝土剪力墙抗震结构进行设计,构建玻化微珠保温混凝土本构模型,获得与抗震结构相关的理论数据。根据所获取的数据,选择板壳单元SHELL63作为玻化微珠保温混凝土剪力墙抗震结构单元。依据抗震结构材料参数以及抗震结构单元,采用ANSYS软件模拟构建玻化微珠保温混凝土剪力墙抗震结构。分析实验结果可知,所设计建筑节能抗震结构的抗震性能较好,实际运用价值高。     

An approach for shake table performance evaluation during repair and retrofit actions

Large‐scale, servo‐hydraulic shake tables are a central fixture of many earthquake engineering and structural dynamics laboratories. Wear and component failure from frequent use may lead to control problems resulting in reduced motion fidelity, necessitating repairs and replacement of major components. This paper presents a methodology to evaluate shake table performance pre‐ and post‐repair, including the definition of important performance metrics. The strategy suggested is presented in the context of the rebuilding of a 4.9 × 3.1 m, 350‐kN‐capacity uniaxial shake table. In this case, the rebuild consisted of characterization of wear to table components, replacement of worn bearing surfaces, and replacement of hydraulic accumulators. To assess the effectiveness of the repair actions, sinusoidal and triangular waves, white noise, and earthquake histories were run on the table before and after the rebuild. The repair actions were successful in reducing the position and velocity dependence of friction, improving the ability of control algorithms to accurately reproduce earthquake motions. The maximum and average response spectral misfits in the period range of 0.1–2 seconds were reduced from approximately 50% to 15%, and from 5% to less than 2.5%, respectively.     

Assessment of soil erosion in a monsoon-dominated mountain river basin in India using RUSLE-SDR and AHP

The long-term average annual soil loss (A) and sediment yield (SY) in a tropical monsoon-dominated river basin in the southern Western Ghats, India (Muthirapuzha River Basin, MRB; area: 271.75 km²), were predicted by coupling the Revised Universal Soil Loss Equation (RUSLE) and sediment delivery ratio (SDR) models. Moreover, the study also delineated soil erosion risk zones based on the soil erosion potential index (SEPI) using the analytic hierarchy process (AHP) technique. Mean A of the basin is 14.36 t ha^?1 year^?1, while mean SY is only 3.65 t ha^?1 year^?1. Although the land use/land cover types with human interference show relatively lower A compared to natural vegetation, their higher SDR values reflect the significance of anthropogenic activities in accelerated soil erosion. The soil erosion risk in the MRB is strongly controlled by slope, land use/land cover and relative relief, compared to geomorphology, drainage density, stream frequency and lineament frequency.     

考虑支座摩擦滑移及结构碰撞的非规则人字形桥梁地震响应分析

针对非规则人字形桥梁在地震作用下灾变严重的问题,以一座非规则人字形桥梁为研究对象,建立其空间分析模型,研究综合考虑支座摩擦滑移、结构碰撞对非规则人字形桥梁地震响应的影响。结果表明:邻梁间的碰撞作用可使得桥梁墩顶位移及内力相比不考虑时有所减小,但同时也使梁体产生了较大的加速度脉冲效应;当考虑支座摩擦滑移和结构碰撞时,固定墩墩顶位移和邻梁相对位移峰值有一定程度增大,然而对梁体加速度脉冲效应结果影响并无统一规律;纵向地震波作用下,非规则人字形桥梁不仅存在顺桥向的碰撞,横桥向的碰撞响应也不容忽视。非规则人字形桥梁进行抗震设计计算时应选取符合实际情况的计算模型,考虑支座摩擦滑移及结构间的碰撞。     

计算结构可靠度的RBF神经网络响应面法

对功能函数不能明确表达的问题进行可靠度分析,常采用响应面法。其中二次多项式响应面法应用较为广泛,采用与此方法相同的思路,提出了RBF神经网络响应面法,并通过算例与常用的BP神经网络响应面法进行了对比分析,该方法在学习速度、迭代次数等方面均优于BP神经网络响应面法。该方法用于大型复杂结构的可靠性分析,可相应提高工作效率和解题质量,具有一定实际应用价值。