Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Efficiency analysis of open trench for impact pile driving through a single-variable method

Abstract

The ground vibrations during pile driving operation have a drastic potential to undermine the surrounding structures both in land and reclaimed land. Particularly, reclaimed land necessitates ample application of pile driving due to the weak land condition. To prevent the structural damage, attenuation of the ground vibrations to an allowable level through active isolation of circular open trench is the scope of this study. In this research, finite element simulations of continuous impact pile driving process from the ground surface was executed with particular attention to the pile-soil interaction, and thereby, the efficiency of open trench application in attenuation of the unsafe distance of different structures was surveyed using the vibration sensitivity degree. Regarding the crucial parameters of an open trench (depth, width, and location), it was concluded that a sufficient high depth can attenuate the unsafe distance up to 68%, the trench width variations are less effective, and an average pile-trench distance is the most efficient option. The excavation volume was also concluded as another crucial parameter in open trench design which takes all three parameters into account. The trench depth equal to the pile’s maximum critical depth of vibration was inferred for an optimum design.     

钢筋混凝土梁结构断裂损伤诊断方法

提出一种基于BP神经网络的结构破损诊断方法,该方法以结构破损前后柔度的变化作为破损诊断网络输入,为了解决由于系统响应样本数据空间分布不均匀对网络收敛速度及网络诊断影响问题,对网络训练样本采用广义空间格点进行了交换,模拟算例及应用实例均表明,本文方法能准确诊断结构破损位置与破坏程度,是一种有效的结构破损诊断方法.     

确定连续系统参数的时域方法

提出一种确定连续系统参数的时域方法。该方法利用方波输入和系统稳定性，离析出输出采样信号与结构参数的内在联系，推导出确定连续系统结构参数的算法．指出该算法与辨识方法相结合，可实现对含随机干扰的连续系统结构参数的估计．     

Nonlinear coupled dynamic response of offshore Spar platforms under regular sea waves

Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom.     

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.     

基于塑性极限分析理论和神经网络响应面的结构系统可靠性分析

根据多层神经网络映射存在定理，提出了基于神经网络响应面和塑性极限分析理论的结构系统可靠性分析的新方法。数值试验表明，该方法可以快速、高质量地求出结构系统可靠性指标，是一个具有发展前景的新方法。     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

青岛胶州湾3.2级地震构造背景与控震断裂

本文应用构造分析的方法 ,对青岛胶州湾 3.2级地震发生的地震地质背景和构造背景进行分析。结果表明 :胶州湾 3.2级地震主要受 NEE向郝官庄断裂和 NNW向大沽河断裂控制 ,并根据现代活动断裂的标志 ,对上述 2组断裂活动性特征作了阐述     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.