Crustal Stress Measurement for Significant Project Construction and Its Application in Design

The hydrofracturing technique has developed into a reliable and practical method for determining the original three-dimensional crustal stress state of underground caverns,the load-bearing capacity of a high pressure cavern itself,and the high pressure hydraulic permeability of rock masses,and has also been extensively used in disposal of nuclear waste,long and deeply-buried traffic channels and high-pressure cavern engineering for hydraulic power plants.The practice shows that the comprehensive measurement of the physical parameters of the rock mass and taking full use of the wall rock load-bearing capacity to optimize the engineering design hold are very useful in ensuring the engineering safety and improving the design level.     

Effect of surface stress on magneto-elastic surface waves in finitely conducting media

This paper deals with the investigation of the effect of surface stress and conductivity on the propagation of surface wave in isotropic, homogeneous, elastic media under the action of a primary magnetic field. Formulation of the general surface wave propagation problem has been made, and the corresponding frequency equation has been derived. Frequency equations for Rayleigh wave, surface shear wave and Stoneley wave have been deduced from that of general surface wave as special cases. The effects of surface stress and magnetic field on the wave velocities and attenuation factors of Rayleigh wave and surface shear wave are shown by numerical calculations and graphs. Some important wave velocity equations, as obtained by other authors, have been deduced as special cases from the wave velocity equation for Stoneley wave. It is found that the combined effect of surface stress and magnetic field modulates the wave velocity ratios and attenuation factors of Rayleigh wave and surface shear wave to a considerable extent.     

Sandstone response to salt weathering following simulated fire damage: a comparison of the effects of furnace heating and fire

Fire has long been recognized as an agent of rock weathering. Our understanding of the impact of fire on stone comes either from early anecdotal evidence, or from more recent laboratory simulation studies, using furnaces to simulate the effects of fire. This paper suggests that knowledge derived from simulated heating experiments is based on the pre‐conceptions of the experiment designer – when using a furnace to simulate fire, the operator decides on the maximum temperature and the duration of the experiment. These are key factors in determining the response of the stone to fire, and if these are removed from real‐world observations then knowledge based on these simulations must be questioned. To explore the differences between heating sandstone in a furnace and a real fire, sample blocks of Peakmoor Sandstone were subjected to different stress histories in combination (lime rendering and removal, furnace heating or fire, frost and salt weathering). Block response to furnace heating and fire is discussed, with emphasis placed on the non‐uniformity of the fire and of block response to fire in contrast to the uniform response to surface heating in a furnace. Subsequent response to salt weathering (by a 10% solution of sodium chloride and magnesium sulphate) was then monitored by weight loss. Blocks that had experienced fire showed a more unpredictable response to salt weathering than those that had undergone furnace heating – spalling of corners and rapid catastrophic weight loss were evidenced in blocks that had been subjected to fire, after periods of relative quiescence. An important physical side‐effect of the fire was soot accumulation, which created a waxy, relatively impermeable layer on some blocks. This layer repelled water and hindered salt ingress, but eventually detached when salt, able to enter the substrate through more permeable areas, concentrated and crystallized behind it, resulting in rapid weight loss and accelerated decay. Copyright © 2007 John Wiley & Sons, Ltd.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Numerical experiments on the generation of long ocean waves in coastal waters of the Buenos Aires province,Argentina

A numerical model (two horizontal dimensions, vertically integrated) is used to investigate the generation of long ocean waves, ranging from 20 min to almost 2 h, at Buenos Aires continental shelf. The domain includes the Río de la Plata estuary and the continental shelf together and extends from 33.5° to 40.5°S latitude, and from 51° to 63°W longitude. Sea-level oscillations are modeled by forcing with passage of atmospheric cold fronts and atmospheric gravity waves. Both forcing mechanisms, which have been present during high activity lapses of long ocean waves, are mathematically implemented. After several numerical simulations, it is concluded that the pressure and wind fields associated to cold fronts do not generate long ocean waves in the area, though they do produce disturbances with periods longer than the tidal ones. On the other hand, it is so concluded that atmospheric gravity waves are an effective mechanism to force long ocean waves. Results obtained show that generation of long ocean waves is highly sensitive depending on the propagation direction and the phase speed of the atmospheric gravity waves. The long ocean wave event detected during the large-amplitude gravity-wave event of 13 October 1985 is successfully simulated. Finally, all our results suggest that atmospheric gravity waves are a highly effective mechanism forcing for the generation of long ocean waves in Buenos Aires coastal waters.     

内力线定性描绘应力场方法及其在地质构造研究中的应用

为了简化地质构造力学分析，本文探讨了用内力线来描绘应力场的方法，仿照用磁力线描绘磁场的做法，约定以从外力作用点，支承点等处发出的一族主应力迹线为代表内力传递路径的“内力线”，根据弹性理论绘制了部分简单应力场的内力线图，阐述了以简单应力场内力线图为基础绘制复杂应力场内力线图并对之进行分析的方法，同时，文中还对这一方法在山字型构造体系和断裂等板内构造应力场分析，隐伏或未知构及地质的推测，地震预报等方面的应用做了尝试。     

重磁遗传算法三维反演中动态数组优化方法

将地下场源划分成很多规划小单元，并且反演这些单元的物性变化是重磁反演，特别是三维反演的重要方向。在应用遗传算法进行该类反演过程中，隐含着数据量大时高维动态数据内存管理问题。为此，作者在本文中提出了简单、有效的动态内存优化方法。     

断层带爆炸裂隙区范围及裂纹扩展长度的研究

常用求算岩石内爆炸裂隙区半径的计算公式中忽略了冲击波的作用、粉碎区的存在以及爆生气体的准静态作用。醉对该公式进行修正后并引和断层带应力波衰减指数α，并对尖力波损伤后的裂隙区的扩展长度进行分析计算，从而得出：考虑“预报伤”作用的爆炸裂纹长度大于不考虑“预损伤”情况下的裂纹长度。     

川南区域构造变形及应力场遥感图像定量解析

采用区域构造变形及应力场遥感图像分层解析法，利用遥感TM图像对研究区宏观构造及有关的横张大节理系统进行详细解译，结合物探资料并应用力学方法对区域构造变形场和应力场进行了计算与分析，建立了该区构造变形场和应力场的三维彩色定量解析模式图，通过综合分析研究，对该区构造组合的空间格局及其控矿（油气）规律进行了探讨。     

根据构造环境剪应力值水平区分地震和核爆炸

根据地震破裂的断裂力学模式，导出了震源参数与地震发生处的构造环境剪应力值t0之间的函数关系．据此，可以大量计算震源处的构造环境剪应力值或背景应力值．若把核爆炸当作地震来计算，发现核爆炸的t0值平均在20MPa左右，明显地高于同震级地震的t0值．其结果可以作为区分地震与核爆炸的依据．