对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

高耸塔架结构节点损伤基于神经网络的两步诊断法

本文针对高耸钢塔架结构的损伤特点，建立了具有节点损伤的有限元模型，提出了一种分层神经网络两步诊断法：第一步，由基于区域残余力理论的第一层神经网络进行结构损伤区域的初诊；第二步，由基于应变模态理论的第二层神经网络进行损伤区域内的具体损伤节点位置和程度的诊断。对一平面塔架结构的数值仿真分析表明：本文提出的损伤诊断方法的结果是令人满意的。     

论环境流场切应变率对台风移动的作用

利用浅水波正压环境流场切应变率对台风移动的影响，得到的结果是：在环境流场切应变率空间不均匀条件下，正切应变率引起的台风偏差路径比负切应变率引起的偏差路径要长，特别在正切应变率的区域，正切应变率要比相对涡度梯度对台风移动有更大的影响。     

桩端沉降测量对试桩成果分析的意义

桩端沉降测量和试桩资料的分析结果表明,桩在传递上部荷载与地基土之间产生的应力应变过程,表现为桩的弹性杆件和地基土的弹—塑性变形特征。从而对受荷桩,尤其是长柱和超长桩的应力应变特征有了更切合实际的认识。     

应变软化在甘肃红柳河辉长质糜棱岩形成中的作用

本文论述的辉长质糜棱岩发现于甘肃北山红柳河蛇绿岩套中。在简单说明了糜棱岩的地质背景及特征、描述了变形岩石的显微构造特征之后，重点对糜棱岩形成过程中的应变软化机制作了论述。探讨了软化岩的存在、组构调整、粒度缩小，长石的动态重结晶，水以及主导变形机制的不断调整与转化等应变软化机制，在应力作用下使岩石逐步软化过程中所起的作用，得出这种糜棱岩是在拆离剪切作用下，应力在蛇绿岩中的软化岩石辉长岩中集中，从而形     

Influence of gas production induced volumetric strain on permeability of coal

Summary The gas permeability of a coalbed, unlike that of conventional gas reservoirs, is influenced during gas production not only by the simultaneous changes in effective stress and gas slippage, but also by the volumetric strain of the coal matrix that is associated with gas desorption. A technique for conducting laboratory experiments to separate these effects and estimate their individual contribution is presented in this paper. The results show that for a pressure decrease from 6.2 to 0.7 MPa, the total permeability of the coal sample increased by more than 17 times. A factor of 12 is due to the volumetric strain effect, and a factor of 5 due to the gas slippage effect. Changes in permeability and porosity with gas depletion were also estimated using the measured volumetric strain and the matchstick reservoir model geometry for flow of gas in coalbeds. The resulting variations were compared with results obtained experimentally. Furthermore, the results show that when gas pressure is above 1.7 MPa, the effect of volumetric strain due to matrix shrinkage dominates. As gas pressure falls below 1.7 MPa, both the gas slippage and matrix shrinkage effects play important roles in influencing the permeability. Finally, the change in permeability associated with matrix shrinkage was found to be linearly proportional to the volumetric strain. Since volumetric strain is linearly proportional to the amount of gas desorbed, the change in permeability is a linear function of the amount of desorbing gas.     

观测应变阶在地震应力触发研究中的应用

对中国钻孔应变台网观测到的昆仑山口西MS8.1大地震的应变阶资料的研究结果表明:① 很多观测值与静力位错理论计算值不符合；② 北方地震较活跃地区的很多台站观测到异常大的应变阶，而南方构造运动较不活跃地区的台站虽然也观测到地震波动，但是应变阶不明显. 由此推断，地震的触发（可能是动态触发）作用对远场的实际地震应变变化具有重要影响. 也就是说，远场的构造活动（可能是断层活动）是否曾被地震触发，可能决定当地的应变场变化的主要特征. 进一步对昌平台1999年3月11日张北地震与1999年11月1日大同地震的观测资料对比分析表明:断裂带的分布情况对实际地震应变变化有直接影响. 这证明观测到的异常大的地震应变阶可能是地震触发了当地的断层活动的表现.      

3-D rheologic model of earthquake preparation (II): Strain field and its applications

Introduction Based on the elastic theory of the hard inclusion (Dobrovolskii, 1991), we developed an inclusion theory of rheologic medium, and applied the results of bulk-strain field of a rheologic inclusion model to explain the spatial-temporal evolution process of earthquake precursors (SONG, et al, 2000). In the former paper (SONG, et al, 2003), we derived the viscoelastic displacement field of the rheologic inclusion model on the basis of the analytic expression of displacement field o…     

Developments of borehole strain observa- tion outside China

Introduction The Earth′s crust deforms in the regional tectonic stress field. Borehole strain observation isone important means for studies on the crustal deformation and the stress field. QIU and ZHANG(2002) have introduced the current situation of borehole strain observation in China. OutsideChina, early in September of 1968, Sacks of Carnegie Institution of Washington and Evertson ofUniversity of Texas firstly invented a borehole dilatometer in the world (Sacks, Evertson, 197…     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.