新疆喀拉通克铜镍硫化矿区二、三号矿床特征及成因

喀拉通克铜镍硫化矿区二、三号矿床的两个岩体为隐伏的中－基性岩体，受北西向断裂的控制，侵位于石炭统南明水组上段之下部地层中，为岩浆熔离型铜镍硫化矿床。矿物成分以磁黄铁矿、镍黄铁矿、黄铜矿为主。有用元素除铜、镍外，尚伴生有金、银、铂、色、钴、硫可综合利用。它国内外同类型矿床相比，具有成岩、成矿时代新，岩体基性程度低、铜大于镍等特点，因而又具有新的地质找矿意义。     

被动椭圆形标志物应变分析的计算机模拟

本文采用计算机数学模拟的方法更深入地探讨了椭圆形标志物应变分析技术(R_f/Φ去应变法、Shimamoto等提出的代数法、调和平均值法和算术平均值法)的适用条件。一共形成了十一组有代表性的应变前数组,四种变形路径:纯剪、单剪、纯剪加单剪和体变。当应变前数组在(-90°,90°)内均匀分布或随机分布时,无论变形路径是哪一种(共轴的还是非共轴的),上述的所有方法都是适用有,且以代数法最佳。当应变前数组具有优选方位(单峰分布)且变形路径为共轴递进变形时,在一定条件下,R_f/Φ法能用来估计应变。经分析发现当应变足够大时,调和平均值法是一种简单快速的应变计算法。     

Interaction among fractures and stress field computation of fracture systems

ＩｎｔｅｒａｃｔｉｏｎａｍｏｎｇｆｒａｃｔｕｒｅｓａｎｄｓｔｒｅｓｓｆｉｅｌｄｃｏｍｐｕｔａｔｉｏｎｏｆｆｒａｃｔｕｒｅｓｙｓｔｅｍｓＺｈｉ－ＬｉＺＨＡＮＧ（张之立）（ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐｈｙｓｉｃｓ，ＳｔａｔｅＳｅｉｓｍｏｌｏｇｉｃａｌＢ...     

Fault dimensions,displacements and growth

Maximum total displacement (D) is plotted against fault or thrust width(W) for 65 faults, thrusts, and groups of faults from a variety of geological environments. Displacements range from 0.4 m to 40 km and widths from 150 m to 630 km, and there is a near linear relationship betweenD andW ². The required compatibility strains (e _s) in rocks adjacent to these faults increases linearly withW and with and ranges frome _s=2×10^–4 toe _s=3×10^–1. These are permanent ductile strains, which compare with values ofe _s=2×10^–5 for the elastic strains imposed during single slip earthquake events, which are characterised by a linear relationship between slip (u) andW.The data are consisten with a simple growth model for faults and thrusts, in which the slip in successive events increases by increments of constant size, and which predicts a relationship between displacement and width of the formD=cW ². Incorporation of constant ductile strain rate into the model shows that the repreat time for slip events remains constant throughout the life of a fault, while the displacement rate increases with time. An internally consistent model withe _s=2×10^–5, giving repeat times of 160 years and instantaneous displacement rates of 0.02 cm/yr, 0.2 cm/yr, and 2.0 cm/yr when total displacement is 1 m, 100 m, and 10 km, and slip increasing by 0.5 mm with each event, gives a good approximation of the data. The model is also applicable to stable sliding, the slip rate varying with ductile strain rate and withW ².     

塔里木盆地北部油气运移二维二相数值模拟分析

油气运移和聚集过程实际上是油（气）水饱和度知疏导层的变化过程，盆地中油（气）二相流动问题的研究就是对这一过程的定量描述，本项研究是在前人工作基础上，考察压实作用造成骨架变形来推导新的二维二相流动方程，它容描述异常压力演化与二相流动于一式，在模拟方法上采用有限分析的数值方法，这应用于新疆塔里木盆地北部地区，展示了该区异常压力、含水饱和度弥散状扩散效应以及流速场在地质历史时期动态模拟演化特征；指出了该     

鲜水河地区现今形变及地球动力学特征

本文根据非线性理论的新方法，稳健估计技术和多核函数等，对鲜水河地区垂直和水平形变监测资料进行了分析处理，获得了鲜水河地区的现今地壳动态信息，从而分析获得鲜水河断裂的现今活动与地震的关系，鲜水河断裂的现今活动模型及其应力状态。     

主应变比异常理论在青海祁连地震预报中的应用

本文利用主应变比异常理论分析了祁连建站以来地应变观测资料，认为肃南──祁连断裂段上及附近发生的地震是由于构造应力场的变化，在引张应力状态下，正断层或走滑断层易于活动而导致的。     

Characteristics of horizontal crustal deformation in Japan as deduced from frequency distribution of maximum shear strain rate

In order to study characteristics of horizontal crustal strains, we divide the Japanese Islands into 14 tectonic provinces consistent with the suggestion given byMatsuda (1990). We calculate frequency distribution of strain rates using the results of the Precise Control Survey initiated by the Geographical Survey Institute in 1973. This survey is a revision of old first- and second-order triangulation networks by trilateration. The principal axes and principal strains inside all the geodetic triangles are deduced from the comparison of the old triangulation and the new trilateration networks. The maximum shear strain rates are calculated by dividing the accumulated strains with the time intervals. The frequency distribution of strain rates is counted for each tectonic province and for the entire Japanese Islands. It is proved that the maximum shear strain rate with highest frequency ranges from 0.10–0.15 microstrain/a for 4409 data in the Japanese Islands. The mean value of the strain rates throughout the Japanese Islands is deduced to be 0.18 microstrain/a. We also calculated a mean value of strain rates for each tectonic province. Comparison is made between mean geodetic strain rates in the provinces and Quaternary strain rates estimated by geomorphic data. It is found that 0.3–0.4 microstrain/a of the highest order strain rate is now prevailing in the Izu province, the south Fossa-Magna collision zone, and some special provinces along the eastern part of the Japan Sea coast.     

鲜水河断裂带的构造大地测量

利用短边GPS点阵、短基线标石阵和精密激光测距 ,在与鲜水河断裂带的断层破裂带垂直的剖面上和构造盆地内进行构造大地测量 ,获得了断层软弱带和断层蠕变带上的最佳形变分布。综合利用相关地学成果和理论 ,揭示了构造形变所隐含的动力学信息 ,识别了断层应变带、塑性流变带和主断面在地面的分布范围。用外围GPS远场联测成果探讨了该断裂带的驱动力机制 ,匡正了其“左旋”运动和现今活动速度的含义。最后 ,评估了该断裂的地震活动趋势