畸形波作用下四立柱张力腿平台动力响应研究

介绍了畸形波生成的方法并对各种线性合成畸形波的效率进行了对比。选用改进的随机波加瞬态波的方法模拟强非线性波———"新年波"的波形。采用微元法对张力腿平台的立柱和浮筒进行离散,编制程序对张力腿平台在强非线性波作用下的耦合动力响应进行了数值模拟,重点比较分析了张力腿平台在随机波及畸形波中所受波浪力、平台动力响应、系泊系统张力特性及浪向角对平台运动的影响。研究表明:在"新年波"作用下,0°浪向时,平台在x和z方向所受波浪力较随机波增长了约1/4,纵荡、垂荡及纵摇响应值分别增加了33%,38%和12%,张力腿张力幅值增加约20%,位于平台四角的张力腿张力有所差异,相邻两根张力腿的张力差别不大,浪向角对平台运动响应、张力腿张力的影响畸形波大于随机波的作用。为今后考虑强非线性波浪影响时张力腿平台的设计提供了借鉴和参考。     

Stochastic evaluation of fluvial to marginal marine sealing facies

Hydrocarbon top seal analyses are particularly difficult in fluvial and marginal marine settings. Although these settings often contain beds comprised of a low-permeability, clay-rich lithology associated with high quality seals, their presence does not guarantee an effective seal because individual beds within the stratal unit may be laterally discontinuous. Lateral facies changes, truncation of fine-grained beds, or the presence of crevasse splays may provide cross-stratal migration pathways, reducing the effective sealing capacity to a magnitude less than the closure height.     

Modeling an atypical petroleum system: A case study of hydrocarbon generation,migration and accumulation related to igneous intrusions in the Neuquen Basin,Argentina

In the Altiplanicie del Payún area (Neuquen Basin, Argentina), immature source rock sections intruded by up to 600 m thick Tertiary laccoliths show full spectrum maturity aureoles over hundreds of meters from the contacts. Commercial oil accumulations (20–33°API) and oil shows are located along the entire column, both in sandstone/carbonate and fractured igneous reservoirs. A challenging numerical model that included the emplacement of the intrusive bodies, with extreme temperature ranges and unusually short calculation time steps, has been done with the aim to better understand hydrocarbon generation and migration processes related to these thermal anomalies.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

北部湾盆地涠西南凹陷C洼烃源岩热史及成熟史模拟

北部湾盆地涠西南凹陷C洼流沙港组烃源岩热史及成熟史研究,对C洼深水油气勘探具有指导意义。在恢复涠西南凹陷C洼地史和热史的基础上,利用EASY%Ro模型计算了流沙港组烃源岩的成熟度史。研究结果表明,在涠西南凹陷发展的裂陷阶段初始期热流值较高,最大值约为77mW/m2,其后热流值逐渐减小,现今热流值约为54mW/m2;涠西南凹陷C洼流沙港组烃源岩开始生烃(Ro=0.5%)时间为51MaBP,达到生烃高峰(Ro=1%)时间为42MaBP,达到高成熟演化阶段(Ro=1.3%)时间为17MaBP;对比涠1井流沙港组烃源岩演化特征,处于C洼深水勘探区的流沙港组烃源岩成熟度较高,生烃能力较强,拥有广阔的油气勘探前景。     

Numerical study of the meridional overturning circulation with “mixing hotspots” in the Pacific Ocean

Using an idealized ocean general circulation model, we examine the effect of “mixing hotspots” (localized regions of intense diapycnal mixing) predicted based on internal wave-wave interaction theory (Hibiya et al., 2006) on the meridional overturning circulation of the Pacific Ocean. Although the assumed diapycnal diffusivity in the mixing hotspots is a little larger than the predicted value, the upwelling in the mixing hotspots is not sufficient to balance the deep-water production; out of 17 Sv of the downwelled water along the southern boundary, only 9.2 Sv is found to upwell in the mixing hotspots. The imbalance as much as 7.8 Sv is compensated by entrainment into the surface mixed layer in the vicinity of the downwelling region. As a result, the northward transport of the deep water crossing the equator is limited to 5.5 Sv, much less than estimated from previous current meter moorings and hydrographic surveys. One plausible explanation for this is that the magnitude of the meridional overturning circulation of the Pacific Ocean has been overestimated by these observations. We raise doubts about the validity of the previous ocean general circulation models where diapycnal diffusivity is assigned ad hoc to attain the current magnitude suggested from current meter moorings and hydrographic surveys.     

Ocean current estimation using a Multi-Model Ensemble Kalman Filter during the Grand Lagrangian Deployment experiment (GLAD)

In the summer and fall of 2012, during the GLAD experiment in the Gulf of Mexico, the Consortium for Advanced Research on Transport of Hydrocarbon in the Environment (CARTHE) used several ocean models to assist the deployment of more than 300 surface drifters. The Navy Coastal Ocean Model (NCOM) at 1 km and 3 km resolutions, the US Navy operational NCOM at 3 km resolution (AMSEAS), and two versions of the Hybrid Coordinates Ocean Model (HYCOM) set at 4 km were running daily and delivering 72-h range forecasts. They all assimilated remote sensing and local profile data but they were not assimilating the drifter’s observations. This work presents a non-intrusive methodology named Multi-Model Ensemble Kalman Filter that allows assimilating the local drifter data into such a set of models, to produce improved ocean currents forecasts. The filter is to be used when several modeling systems or ensembles are available and/or observations are not entirely handled by the operational data assimilation process. It allows using generic in situ measurements over short time windows to improve the predictability of local ocean dynamics and associated high-resolution parameters of interest for which a forward model exists (e.g. oil spill plumes). Results can be used for operational applications or to derive enhanced background fields for other data assimilation systems, thus providing an expedite method to non-intrusively assimilate local observations of variables with complex operators. Results for the GLAD experiment show the method can improve water velocity predictions along the observed drifter trajectories, hence enhancing the skills of the models to predict individual trajectories.     

Investigation of drag crisis phenomenon using CFD methods

When fluid flow passes a cylinder, the drag crisis phenomenon occurs between the sub-critical and the super-critical Reynolds numbers. The focus of the present studies was on the numerical prediction of the drag crisis based on CFD methods. In this work, block structured meshes with refined grids near the cylinder surface and in the downstream were employed. Both 2D and 3D simulations were performed using various turbulence models, including the SST k − ω model, the k − ϵ model, the SST with LCTM, the DES model, and the LES model. In the convergence studies, the effects of the grid size, the time step, the first grid size and the aspect ratio (for 3D simulations) on the solutions were examined. The errors due to spatial and time discretizations were quantified according to a V&V procedure. Validation studies were carried out for various Reynolds numbers between Re = 6.31 × 10⁴ and 7.57 × 10⁵. The averaged drag force, the RMS of lift force and the Strouhal number were compared with experimental data. The studies indicated that standard 2D and 3D RANS methods were inadequate to capture the drag crisis phenomenon. The LES method however has the potential to address the problem.     

Numerical investigation of the uplift performance of prestressed fiber-reinforced polymer floating piles

Finite element analyses of prestressed fiber-reinforced polymer floating piles subjected to uplift force have been conducted in this paper. First, parameters of the modified BPE model (bond–slip model at the fiber-reinforced polymer–concrete interface) were calibrated using existing pullout testing data on fiber-reinforced polymer rebars embedded in concrete. Nonlinear spring elements were used in numerical modeling to characterize the bond–slip behavior at the fiber-reinforced polymer–concrete interface. A parametric study was performed to assess the influence of rebar diameter, fiber-reinforced polymer material, embedment length, and concrete strength on the mobilized bond stress. Upon the successful modeling of the pullout performance of fiber-reinforced polymer rebars in concrete, numerical models were developed to investigate the dependence of the uplift performance of floating piles on the prestress level, uplift force, fiber-reinforced polymer type, and compressive strength of concrete.