约束高强度Q460钢柱抗火性能分析

为了研究高强度约束钢柱在火灾下的反应,根据高强度结构钢Q460在高温下的力学性能参数,建立了约束高强度钢柱受火分析模型,得到了高强度约束钢柱在火灾下的轴向位移、跨中挠度、最大应力以及临界温度。采用有限元分析对理论结果进行了验证,两者吻合很好。利用验证过的该文计算方法计算了2种荷栽比、长细比和约束刚度比条件下的高强钢柱的抗火性能;采用CECS200：2006的力学性能参数计算了约束普通钢柱的抗火性能。通过对高强钢和普通钢的抗火性能分析发现,轴向约束明显降低钢柱的临界温度,长细比、荷载比越大,临界温度越低;高强钢的抗火性能要优于普通钢。     

东南极拉斯曼丘陵石榴斜长角闪岩中角闪石的~(40)Ar-~(39)Ar年龄及其地质意义

本文对东南极拉斯曼丘陵出露的石榴斜长角闪岩中的角闪石进行了４０Ａｒ－３９Ａｒ年龄测定,分别得到角闪石视年龄１５８６Ｍａ、１０１１～１０８０Ｍａ、７６１Ｍａ和５２９～５８２Ｍａ,角闪石坪年龄１０３６Ｍａ和５５４Ｍａ,角闪石Ａｒ－Ａｒ等时线年龄１０１０Ｍａ,这些同位素年龄证据,首次完整地记录了该区所经历的几乎所有构造变质热事件,为近几年国内外地质学家关于该区构造变质热事件争论的焦点问题,即晚元古代的１０００Ｍａ格林维尔事件（Ｇｒｅｎｖｉｌｉａｎ）与早古生代的５００Ｍａ泛非事件（Ｐａｎ－Ａｆｒｉｃａｎ）孰轻孰重以及前者是否存在,提供了答案。角闪石的４０Ａｒ－３９Ａｒ年龄测定结果表明,拉斯曼丘陵地区经历了复杂的多期变质演化历史,其原岩可能形成于早－中元古代,占主导地位的应该是晚元古代的１０００Ｍａ格林维尔事件,而５００Ｍａ泛非事件则是晚期较强烈的变质热事件。     

沉积地层中成矿作用的碳同位素特征和含矿缺氧盆地成因新观点

沉积盆地内地层中碳的来源 ,根据其碳、氧同位素特征可归纳为 :海洋沉积碳酸盐碳、生物碳、热解非生物成因碳、大气淡水方解石碳和热卤水系统中的无机碳。热水成因的金矿及喷气 沉积矿床中的碳都具有深源成因的无机碳。深部含无机碳的热流体喷溢到海洋底部可以解释为扩张盆地底部形成的缺氧环境和含矿黑色页岩的主导原因     

基于数字摄影的钢结构变形监测系统研究

讨论了基于数字摄影的钢结构变形监测系统研究所解决的主要问题，提出了相应的解决方法，并论述了整个系统的流程。     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Highly Oxidized Magma and Fluid Evolution of Miocene Qulong Giant Porphyry Cu‐Mo Deposit,Southern Tibet,China

The Miocene Qulong porphyry Cu‐Mo deposit, which is located at the Gangdese orogenic belt of Southern Tibet, is the largest porphyry‐type deposit in China, with confirmed Cu ～10 Mt and Mo ～0.5 Mt. It is spatially and temporally associated with multiphase granitic intrusions, which is accompanied by large‐scale hydrothermal alteration and mineralization zones, including abundant hydrothermal anhydrite. In addition to hydrothermal anhydrite, magmatic anhydrite is present as inclusions in plagioclase, interstitial minerals between plagioclase and quartz, and phenocrysts in unaltered granodiorite porphyry, usually in association with clusters of sulfur‐rich apatite in the Qulong deposit. These observations indicate that the Qulong magma‐hydrothermal system was highly oxidized and sulfur‐rich. Three main types of fluid inclusions are observed in the quartz phenocrysts and veins in the porphyry: (i) liquid‐rich; (ii) polyphase high‐salinity; and (iii) vapor‐rich inclusions. Homogenization temperatures and salinities of all type inclusions decrease from the quartz phenocrysts in the porphyry to hydrothermal veins (A, B, D veins). Microthermometric study suggests copper‐bearing sulfides precipitated at about 320–400°C in A and B veins. Fluid boiling is assumed for the early stage of mineralization, and these fluids may have been trapped at about 35–60 Mpa at 460–510°C and 28–42 Mpa at 400–450°C, corresponding to trapping depths of 1.4–2.4 km and 1.1–1.7 km, respectively.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.