受火钢筋混凝土柱三维温度场的数值模拟

受火构件内部温度场随时间和空间的变化规律对结构和构件的高温响应和抗火性能是至关重要的。应用通用有限元分析程序ABAQUS,对火灾下钢筋混凝土柱的二维温度场和三维温度场进行了有限元分析计算。所得计算结果与相关试验数据吻合,证明了通过通用有限元软件对钢筋混凝土结构进行三维温度场分析的可行性,也为混凝土结构在高温下以及高温后的三维响应分析提供了理论依据。     

标准升温条件下PEC柱耐火极限理论分析及简化计算

基于ABAQUS软件建立了标准升温条件下局部填充混凝土（Partially Encaed Concrete,简称PEC）柱抗火性能分析的有限元模型,计算了火灾下PEC柱的变形曲线及耐火极限,计算结果得到了已有试验数据的验证。利用上述模型分析了截面几何参数、材料物理参数、荷载比及偏心率等因素对耐火极限的影响。在参数分析的基础上,建立了标准升温条件下PEC耐火极限简化计算方法。结果表明：无耐火保护PEC柱的耐火极限一般达不到现有抗火标准的要求;荷栽比、长细比和截面周长是影响PEC柱耐火极限的主要因素;该耐火极限简化计算方法可供工程设计参考。     

Performance of geosynthetic-reinforced granular piles in soft clays: Model tests and numerical analysis

The laboratory model tests and numerical analyses have been performed on reinforced granular piles installed in very soft clay. The granular piles were reinforced with geosynthetic in the form of vertical encasement, horizontal strips and combined vertical-horizontal reinforcement. The short term-displacement control model tests were carried out either only a granular pile loaded or with an entire area loaded. The laboratory results in the form of vertical load intensity-settlement behaviour were compared with that obtained from FEM software, PLAXIS 3D. The results indicated significant improvement in ultimate load intensity and stiffness of treated ground due to inclusion of geosynthetic.     

碳纤维布改善高强混凝土柱延性的试验研究

本文进行了8根高强混凝土柱在低周反复荷载作用下的试验，研究了使用碳纤维布横向包裹的高强混凝土柱来提高其延性这种加固方法的有效性。本文研究了碳纤维布横向包裹高强混凝土柱的受力特性，分析了加荷角度，碳纤维布拉伸强度以及碳纤维布的包裹层数等因素对构件抗震加效果的影响，并对碳纤维布加固高强混凝土柱使其延性提高的机理进行了探讨，试验结果表明，横向缠裹碳纤维布可显著提高高强混凝土柱的延性。     

钢管混凝土短柱支座隔震性能研究

本文提出一种钢管混凝土短柱隔震支座座，通过伪静力试验测定了短柱支座的恢复力特性，给出了有关恢复力的某些特征参数的表达式；对一座廿层砌体主房屋进行了非线性地震反应分析，考察了短柱支座的特性及其隔震效果；通过模型振动台试验，进一步验证了短柱支座的耳震效果和计算模型的准确性。     

Removal of lead minerals from copper industrial flotation concentrates by xanthate flotation in the presence of dextrin

Potato starch and dextrins resulting from thermolysis of potato starch in the absence of reagents and presence of -amino acids are promising depressants for separation of lead and copper minerals present in the Polish industrial copper concentrates. The polysaccharides were used for differential xanthate flotation of the final industrial concentrates produced by flotation with sulfhydryl collectors in the absence of depressants. The polysaccharides depressed galena and provided froth concentrate rich in chalcocite and other copper minerals as well as cell product containing lead minerals. The best results of separation were obtained in the presence of plain dextrin prepared by a thermal degradation of potato starch. The industrial concentrate containing 18.5% Cu and 5.5% Pb was divided into a froth product containing 38.1% Cu with 77% recovery of copper and a cell product assaying 7.3% Pb with 83% recovery of lead. It was accomplished using 2500 g/t of dextrin, 50g/t of potassium ethyl xanthate, and 50 g/t of frother (α-terpineol). The pH of flotation was 8.0–8.2.     

圆钢管混凝土截面延性系数

首先介绍了圆钢管混凝土中核心混凝土极限压应变的计算方法，通过参数分析，给出了核心混凝土极限压应变的限值。在此基础上，建立了截面极限曲率的计算公式，给出圆钢管混凝土截面延性系数的计算方法，并对有关影响因素进行分析，最后给出延性系数的建议值。研究进一步表明，圆钢管混凝土具有良好的抗震性能。     

钢筋混凝土异形柱框架结构楼层受剪承载力计算方法

在不考虑结构整体扭转的前提下，假定异形柱框架结构中的异形柱为单向偏心受压且为弯曲型破坏，给出了异形柱正截面受弯承载力和异形柱框架结构楼层受剪承载力计算方法。方法简便实用，与试验结果比较吻合。     

Analysis of tubular steel bridge piers

A one‐dimensional model is proposed for the static and dynamic analysis of tubular steel bridge piers subjected to strong ground motions. The present formulation does not require experimental results nor shell analysis to obtain the constitutive equation of the model, which shows strength deterioration. The material properties and dimensions of bridge piers are required for static and dynamic analysis of the present model. The present analysis consists of two steps. The first step is to obtain the stress and strain relationship of the base plastic‐hinge region, where local inelastic buckling is observed. The modified Shanley's model and fiber elements are used to establish the compressive skeleton curve. The strength deterioration is taken into account in the resulting constitutive model. The second step is to analyze static and dynamic responses of tubular steel bridge piers. For overall analysis, the base plastic‐hinge region is discretized in the circumferential direction by using fiber elements whose constitutive equation was obtained in the first step. The validity of the present model has been confirmed through comparisons with existing experimental results. Copyright © 2005 John Wiley & Sons, Ltd.     

改性木薯淀粉胶的研制

本文探讨了木薯氧化胶为制备方法及工艺条件，加入了聚乙烯醇，尿素，ＣＭＣ等助剂进行改性，使其在流动性，透明性和粘接性等方面有很大改善，并找到了最佳条件。