Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

水对断层摩擦滑动稳定性的影响

在不同含水条件下研究了光面、含脆性物质夹层和含延性物质夹层 3类断层的摩擦滑动行为 ,认为水对断层滑动稳定性和摩擦滑动的速度依赖性有重要影响。建立了含有岩性、围压 (深度 )和含水量 3因素的断层活动稳定性的模式 ,认为脆性断层更多地表现为速度弱化 ,少量水的存在易于出现黏滑 ,高孔隙压时会表现为稳滑 ;半脆性或半延性的断层在少量水或较低孔隙压的情况下会表现出速度弱化 ,也就可能出现黏滑 ,但孔隙压较高后 ,会表现出速度强化 ,滑动也就会是稳定的 ;延性断层多为速度强化 ,不出现黏滑。提出水的进入降低了系统的稳定性 ,水的存在增加了系统的稳定性。这是考虑水或一般流体对岩体或断层活动稳定性影响时需要考虑的两个方面     

Investigating Landslides Caused by Earthquakes – A Historical Review

Post-earthquake field investigations of landslide occurrence have provided a basis for understanding, evaluating, and mapping the hazard and risk associated withearthquake-induced landslides. This paper traces thehistorical development of knowledge derived from these investigations. Before 1783, historical accounts of the occurrence of landslides in earthquakes are typically so incomplete and vague that conclusions based on these accounts are of limited usefulness. For example, the number of landslides triggered by a given event is almost always greatly underestimated. The first formal, scientific post-earthquake investigation that included systematic documentation of the landslides was undertaken in the Calabria region of Italy after the 1783 earthquake swarm. From then until the mid-twentieth century, the best information on earthquake-induced landslides came from a succession ofpost-earthquake investigations largely carried out by formal commissions that undertook extensive ground-based field studies. Beginning in the mid-twentieth century, when the use of aerial photography became widespread, comprehensive inventories of landslide occurrence have been made for several earthquakes in the United States, Peru, Guatemala, Italy, El Salvador, Japan, and Taiwan. Techniques have also been developed for performing ``retrospective' analyses years or decades after an earthquake that attempt to reconstruct the distribution of landslides triggered by the event. The additional use of Geographic Information System (GIS) processing and digital mapping since about 1989 has greatly facilitated the level of analysis that can applied to mapped distributions of landslides. Beginning in 1984, syntheses of worldwide and national data on earthquake-induced landslides have defined their general characteristics and relations between their occurrence and various geologic and seismic parameters. However, the number of comprehensive post-earthquake studies of landslides is still relatively small, and one of the most pressing needs in this area of research is for the complete documentation of landslides triggered by many more earthquakes in a wider variety of environments.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

河南郑州台数字化DSQ水管倾斜仪观测精度的评定

选取了河南郑州台数字化 DSQ型水管倾斜仪观测资料较好的 2 0 0 1年 10月 1日至 12月 31日的数据进行了分析处理 ,对该仪器的观测精度进行了评定。经计算 ,其北南向和东西向日飘移分别为 0 .0 0 0 7s和 0 .0 0 2 6 s,M2 的振幅因子为 0 .714 9和 0 .6 4 14 ,振幅因子中误差为 0 .0 0 5 5和0 .0 0 4 4。     

GIS支持下的山东省土壤侵蚀空间特征分析

利用遥感（RS）技术提取土壤侵蚀信息，在地理信息系统（GIS）支持下，借助数据库管理系统（DBMS），建立空间数据库和属性数据库；以县级行政区域为综合分析单元，计算土壤侵蚀强度综合评价指数并进行分级处理，对山东省土壤侵蚀空间特征进行分析。     

疏勒河流域昌马灌区泉水量预测分析

疏勒河流域农业灌溉主要采用地表水灌溉 ,泉水为该区农业灌溉的主要水源之一 ,该文利用 2 0世纪 90年代的测流资料 ,采用有限差分方法对疏勒河中游泉水量的变化趋势进行预测分析 ,结果显示 ,随着时间的延长 ,泉流量呈逐渐减小的趋势 ,但下降梯度逐渐变小 ,最终趋于稳定     

河北省粮食生产灰色关联动态分析

根据 194 9～ 1998年各县 (市 )的统计资料 ,分析了河北省近 5 0年粮食生产的变化历程和空间差异 ,运用灰色系统理论对影响河北省粮食生产的诸因素进行关联动态分析 ,量化了粮食总产量与诸因子的关联程度 ,指出粮食单产、有效灌溉面积和粮食播种面积是影响河北省粮食生产的最重要因素 ,并提出了实现河北省粮食生产可持续发展的基本途径 ,为今后河北省农业可持续发展提供了参考依据     

大连市城市内部居住环境评价的空间结构——基于面源模型的分析

以大连市为例 ,首先利用ARC/INFO软件将研究地区划分成 162个元胞作为评价的基本空间单元 ,建立了居住环境评价的面源模型。其次利用MDS方法确定了评价因子、列联表法验证了居民属性与居住环境评价之间的相互独立程度、因子分析方法探讨了居住环境评价结构的平行性。最后应用GIS对居住环境评价空间分异现象进行了分析。