Formation Environment of the High-Pressure Metamorphic Rocks, Western Tianshan, Xinjiang, China

1.IntroductionFromexperimefltalphaseequilibrium,stableisotOPe,andthermo-barometricstudies,ProgradebineschistdineralparageneseshavebeenproducedexclusivelyatrelativelyhighPadratios(DeRoever,1956;Miyashiro,1961;DobretsovandSobolev,1984;Emst,1973,1988;Maruyamaetal.,1996).InthelastthreedeCades,withtheadvanceofplatetectonics,manygeologistssuggestedthatblueschists,representinghigh-Pressurelow-tCmperamre~rphism,areformedbysubductionofoceanicplate(Emst,1973).Blueschistshavealsobeenregardedasoneof…     

试论陆壳增生的两种基本模式及其对比

大陆地壳是地球形成演化的必然产物。大陆地壳由不同时代、不同类型、不同规模地体的拼贴而增生；同时已形成的大陆地壳沿着新的断裂分裂、离散而碱小。因此大陆地壳是地体拼贴增生与分裂离散的综合结果。太古代早期，原始陆壳形成后，主要通过环太平洋型与天山型两种基本模式达到陆壳的增生。环太平洋型陆壳增生模式出现于陆块的边缘，由古大陆向大洋方向单向增生，增生年代由老到新，增生地体一般都有较大距离的移置，其增生与板块的俯冲作用密切有关。天山型陆壳增生模式出现在陆块的内部，其形成与陆块的开台作用密切有关，可以但不一定伴随有俯冲作用。当古大陆沿一定方向断裂带分裂、离散。其间形成新的海槽接受碳酸盐岩和正常陆源碎屑沉积物与来自地壳深部或地幔的火山物质。由于壳下应力条件改变，两侧古陆相向运动，海槽中物质受两侧古陆碰撞挤压，形成褶皱造山带，并把两侧的古大陆“焊接”成新的、范围更大的大陆地壳。     

Giant ancient landslide in the Alma water gap (Crimean Mountains,Ukraine): notes to the predisposition,structure, and chronology

Large-scale ancient landslides of the area of more than 5 km² and volume exceeding 200 × 10⁶ m³ are characteristic features of the valleys incised in the northern periphery of the Crimean Mountains (Ukraine). The largely affected area is located in the outermost cuesta range of the Crimean Mountains which consists of rigid Sarmatian limestones overlying weak Middle Miocene and Upper Palaeogene deposits. A giant landslide arose in the Alma water gap as a reflection of several coincident preparatory factors such as suitable bedrock stratification, smectite-rich bedrock exposed to swelling activity, presence of faults parallel to the valley trend, and river capture event which preceded the landslide event. The occurrence of such ancient megaslides is particularly interesting in the area which is characterized by low precipitation (<500 mm/year) and weak contemporary seismicity. It probably reflects a more dynamic environment in humid phases of the Holocene; however, seismic triggering along the Mesozoic suture zone cannot be rejected. Compressional features such as gravitational folds in the central and distal parts of the landslide, which probably correlate with the whole landslide genesis or its significant reactivation, arose, according to the radiocarbon dating, during the Holocene climatic optimum in the Atlantic period. The slope deformation has been relatively quiescent since that time, except minor historic reactivization which took place in the frontal part of the landslide. We suppose that the studied landslide could be classified as a transitional type of slope deformation with some signs of spreading and translational block slides.     

Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

青藏高原西部蛇绿岩中玻安岩(boninite)及其地质意义

简要报道了在青藏高原西部班公湖蛇绿岩带和狮泉河蛇绿岩带之间的火山岩中识别出的玻安岩。玻安岩是俯冲岩浆作用的产物,在青藏高原东部及周边地区已有玻安岩或玻安岩系岩石存在的报道。结合西部出现的玻安岩说明青藏高原地区俯冲作用普遍存在。玻安岩的形成时代为J₂-K₁,埃达克岩的形成时代为K₁,由J₂-K₁,的玻安岩至K₁的埃达克岩反映冈底斯北部岛弧带由不成熟的洋内弧向成熟岛弧转变的过程,它们是中生代冈底斯北部大陆水平生长(侧向增生)的记录。     

东昆仑山南缘大型转换挤压构造带和斜向俯冲作用

东昆仑地体和巴颜喀拉－－松潘甘孜地体之间的会聚边界是一条位于东昆仑南缘的大型转换挤压构造带。研究表明该带的东段（阿尼玛卿段）和西段（东－西大滩段）构造特征不同,阿尼玛卿段的构造以印支期具往南西造山极性的逆冲叠覆岩片和新生代脆性左行走滑构造为特征,东－西大滩段是由220Ma形成的EW向韧性左行走滑剪切带及两则伴生的挤压褶皱断裂带组成,韧性变形持续至20Ma,之后表现为脆性左行走滑构造再活动。因此,东昆仑南缘大型会聚带是一条由东段的“收缩挤压”为主向西段的“转换挤压”逐渐过度的特殊复杂的构造带,它的形成与巴颜喀拉－－松潘甘孜地体往NE方向斜向俯冲于东昆仑地体之下有关。     

Deformation and metamorphism in the Bard area of the Sesia Lanzo Zone, Western Alps, during subduction and uplift

The structure, microstructure and petrology of a small area close to the village of Bard in Val d'Aosta (Italy) has been studied in detail. The area lies across the contact between the Gneiss Minuti (GM) and the Eclogitic Micaschist (EMS) Complexes of the Lower element of the Sesia portion of the Sesia-Lanzo Zone (Western Alps). Both complexes have undergone high-pressure metamorphism, but the metamorphic assemblages indicate a sudden increase in pressure in going across the contact from the GM to the EMS. Therefore, we interpret the contact as a thrust dividing the lower element of the Sesia into two sub-elements. This interpretation is supported by structural evidence.
The early Alpine (90-70 Ma) metamorphic history is best preserved in the EMS and is one of increasing pressure associated with thrusting. The maximum P/T recorded in the EMS is >1500 MPa (>15kbar) and 550°C and in the GM is < 1500-1300 MPa (< 15-13 kbar) and 500-550°C. We suggest that the rocks were probably in an active Benioff zone during this time.
From then on the histories of the GM and EMS are the same. Deformation continued and the thrust and thrust slices were folded during decreasing pressure. We interpret the first postthrusting deformation in terms of uplift associated with continued shortening of the crust and underplating after the Benioff zone had become inactive and a new Benioff zone had developed further to the north-west.
A still later deformation and the Lepontine metamorphism (38 Ma) are related to continued uplift. Much of this deformation is characterized by structures indicative of vertical shortening and lateral spreading as the mountains rose above the general level of the surface.     

Special Issue Devoted to Petroleum Geology in Marginal Sea Deepwater Settings—Take the South China Sea as an Example Preface

High‐resolution tomographic images of the belt crossing the Japan Trench‐Changbai Mountains‐Dong Ujimqin Qi are represented in this paper, revealing the shape of a subducted slab in the western Pacific region and characteristics of the lithospheric structures under the Changbai Mountains and the Da Hinggan Mountains. Studies of the spatial distribution, subduction time and the time‐lag between the subduction and magmatism, combined with petrology and isotope geochemistry of the Late Mesozoic volcano‐plutonic rocks from the Da Hinggan Mountains‐Yanshan Mountains have further proved the independence of magmatic activities from the subduction of the Pacific plate. The Mesozoic tectono‐thermal evolutionary history and structural characteristics of the lithosphere in the Da Hinggan Mountains and North China suggest that the formation and evolution of magma have probably a close relationship with the delamination and thinning of the continental lithosphere and the underplating resulting from the consequent upwelling of the asthenosphere. On the other hand, the large‐scale strike‐slip fault system, resulting from sinistral shearing of the Pacific plate relative to the Asian continent in the Mesozoic, is responsible for the formation and emplacement of magma on the continental margin. It was the intense crust‐mantle interaction, together with structural deformation at the shallower levels that led to the large tectono‐magmatic belt in the East Asian continental margin.     

论博格达俯冲撕裂型裂谷的形成与演化

博格达裂谷带位于准噶尔与吐－哈两个前寒武纪地块之间,呈东－西走向,东端与克拉麦里－哈尔里克泥盆－石炭纪火山弧呈大角度相交。该 裂谷于早－中石炭世启动和沉降,在盆地中堆积了巨厚的陆源碎屑岩夹双峰式火山岩。裂谷的闭合发生于中石炭世末至晚石炭世。在裂谷闭合后区域构造由挤压向拉张的转折时期,发生了以辉绿岩为主的侵入活动,并伴有少量中－酸性分异产物。博格达裂谷东、西两段的演化特征有着显著差异。东段早石炭世就已开始裂离,裂离过程的火山岩以玄武岩为主,仅有少量流纹岩,裂谷盆地强烈沉降,形成深海－半深海环境,裂谷在中石炭世末至晚石炭世初即已闭合,裂谷岩系因强烈褶皱,与上覆二叠系呈明显角度不整合,显示了“突变”式闭合特征。与此不同的是,西段至中石炭世才开始明显裂离,裂离过程的火山岩以英安岩和流纹岩为主,玄武岩量较少,火山－沉积岩系均形成于浅海环境,裂谷至晚石炭世末才发生闭合,裂谷岩系因未发生强烈褶皱,故与上覆二叠系为平行不整合接触,显示了“渐变”式闭合特征。该裂谷的形成是古亚洲洋壳向先存的准－吐－哈陆块斜向俯冲,将其东南端撕裂的产物,因而可称为俯冲撕裂型裂谷。演化过程沿走向的明显不均一性是这类裂谷的重要特点。     

龙门山陆内俯冲带形成机制探讨

本文分析了龙门山陆内俯冲带两侧岩石圈的强度结构特征及在侧向力作用下所发生的变形过程。盆地岩石圈中高强度层厚而紧凑,显示了较好的整体高强度性;造山带岩石圈上地壳具高强度,其下为低强度层。在侧向挤压力的作用下,变形主要发生于造山带一侧,最可能的变形方式是其脆性上地壳出现倾向后陆的逆冲断层,盆地岩石圈沿此断层俯冲,挤压其下部的低强度层,使之发生韧性增厚变形。