Kinetic energy–rainfall intensity relationship for Central Cebu, Philippines for soil erosion studies

In the study of soil erosion, specifically on detachment of soil particles by raindrop impact, kinetic energy is a commonly suggested indicator of the raindrop's ability to detach soil particles from the soil mass. Since direct measurement of kinetic energy requires sophisticated and costly instruments, the alternative approach is to estimate it from rainfall intensity. The present study aims at establishing a relationship between rainfall intensity and kinetic energy for rainfalls in Central Cebu, Philippines as a preface of a wider regional investigation.

Drop size distributions of rainfalls were measured using the disdrometer RD-80. There are two forms of kinetic energy considered here. One is kinetic energy per unit area per unit time (KE_R, J m⁻² h⁻¹) and the other is kinetic energy per unit area per unit depth (KE, J m⁻² mm⁻¹). Relationships between kinetic energy per unit area per unit time (KE_R) and rainfall intensity (I) were obtained using linear and power relations. The exponential model and the logarithmic model were fitted to the KE–I data to obtain corresponding relationships between kinetic energy per unit area per unit depth of rainfall (KE) and rainfall intensity (I). The equation obtained from the exponential model produced smaller standard error of estimates than the logarithmic model.     

Macroseismic Intensity Modelling of Earthquakes in Southern Spain: Attenuation and Tectonic Implications

A modelling of the observed macroseismic intensity of historical and instrumental earthquakes in southern Spain is proposed, with the aim of determining the macroseismic parameters for seismic hazard evaluation in a region in which the characterization of intensity distribution of seismic events shows different levels of difficulty referable to the complex faults system of the area in study. The adopted procedure allows an analytical determination of epicenters and principal attenuation directions of earthquakes with a double level of verification with reference to the maximum shaking area and structural lineaments of the region, respectively. The analyses, carried out on a suitable number of events, highlight, therefore, some elements for a preliminary characterization of a seismic zonation on the basis of the consistency between seismic intensity distribution of earthquakes and corresponding structural framework.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.     

华蓥山隧道岩溶发育强度垂直分带

论述了华蓥山隧道的岩溶发育特征,根据岩溶发育强度的划分依据和划分标准,结合岩溶发育的历史,采用类比判别法、主因素判别法和综合判别法对岩溶发育强度作了垂直分带,据此预测的溶洞规模与实际情况吻合。     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

强台风海鸥登陆期间近地层风特性分析

利用位于海南文昌市的90 m测风塔观测的强台风海鸥多层测风数据,分析了台风海鸥登陆期间近地层风场时空特征、湍流强度、垂直风切变及阵风因子等风场特性,分析结果表明:台风海鸥登陆期间,近地层各高度风速呈现"M"型双峰特征,最大风速出现在台风后风圈;台风过境前后,风向旋转了180°;近地层风速随高度升高而增大,各高度风速垂直切变符合对数和指数规律;粗糙度长度、风廓线幂指数、湍流强度、阵风系数等风场特性与风速呈负相关关系,随着风速的增加而降低;从台风外围至台风眼,粗糙度长度随风速呈现"增大-减小-增大"特征;台风眼内部风速垂直切变剧烈,前后风圈的风速垂直切变较弱;强风区湍流强度较弱,弱风区湍流强度较强;台风风圈的湍流强度随高度增加而减小,台风眼内湍流强度随高度先减小再增加;台风影响各阶段阵风系数随高度升高而减小,各高度层阵风系数遵循指数定律;阵风系数随风速的增大而减小,当风速达到一定强度时,阵风系数随风速变化不明显。     

IEC的风机选型参数估算方法在中国的适用性研究

国际电工委员会编制的《风力发电机组设计要求》(IEC 61400-1)推荐了针对风电机组安全等级评估的极端风速和湍流强度特征值估算方法,因其简单便捷,在风电领域被广泛采用。利用全国风能资源专业观测网的193座测风塔观测数据,对IEC推荐的极端风速计算方法与我国规范推荐的基于极值I型概率分布方法进行比较,发现两种方法计算的193座塔70 m高度层50年一遇10 min平均最大风速,仅有7座测风塔较为一致,差异在±1%;IEC推荐方法的计算结果多数偏小,其中偏小10%以上的测风塔有121座,偏小30%以上的有44座测风塔,而偏大10%以上的只有9座测风塔;IEC方法计算的极值风速大幅度偏小的测风塔主要分布在台风影响的东南沿海地区,偏差较小的测风塔主要分布在西北和华北地形平缓区域,但同时偏大10%以上的测风塔也多分布在这一地区。以目前行业领域普遍采用的以15 m·s~(-1)风速的平均湍流强度作为风电机组选型指标,与严格按照规范,以15 m·s~(-1)风速段所有样本湍流强度的90%分位数处的值作为指标进行风电机组等级确定作对比,发现193座塔中有46座塔的选型是不安全的,甚至相差两个等级。     

1951—2015年乌鲁木齐市升温过程频数及强度气候特征

利用乌鲁木齐市气象站1951年1月1日至2015年12月31日的逐日气温资料,以日最高气温及其升温幅度为指标,整理出乌鲁木齐市近65年升温过程数据库,将升温过程分为Ⅰ级(弱)、Ⅱ级(中等强度)、Ⅲ级(较强)、Ⅳ级(强)以及Ⅴ级(极强)5个等级,分析了乌鲁木齐市各级升温过程发生频数、持续日数、过程不同时段升温幅度、过程最高气温、过程最高气温距平偏高幅度等要素气候特征。结果如下：(1)1951—2015年,乌鲁木齐市出现升温过程5677次,平均每年87.3次,其中Ⅰ级(弱)升温过程占67.8 %。升温过程发生频数的季节分布较均匀,但在春季相对较多。近65年来,年平均升温过程发生频数在7个年代际中差异不大,没有明显的线性变化趋势。(2)1951—2015年,乌鲁木齐市5677次升温过程的平均持续日数为2.14?d,其中持续1 d的过程占43.0 %。随升温过程等级由Ⅰ级到Ⅴ级提高,过程持续日数最高出现频率也从1?d过渡到3?d。升温过程持续日数在春季4、5月份最长。(3)1951—2015年,乌鲁木齐市过程升温幅度平均为5.76℃,在春季最大、秋季最小。Ⅳ级(强)以及Ⅴ级(极强)的过程升温幅度最大的月份分别是5月和3月。65年来,乌鲁木齐市升温过程的最大24h、48h和72h升温幅度平均值分别为3.72℃、6.12℃和8.23℃,最大24 h升温幅度在冬季最大、夏季最小,最大48 h和72 h升温幅度都是在春季最大、秋季最小。(4)1951—2015年,乌鲁木齐市升温过程的最高气温平均值为14.52℃,在夏季7、8月最高,在冬季各月最低,带有显著的季节背景特征。过程最大日气温距平的平均值为2.93℃。Ⅳ级(强)和Ⅴ级(极强)升温过程的日气温距平偏高幅度最大月份分别出现在1月(11.73℃)和12月(19.10℃)。     

南海海岛自动气象站防护应用技术探索

立足海南及南海的自然条件,结合海岛自动气象站在南海高温、高湿、高盐雾、强辐射、强风等恶劣气候环境下使用情况,通过对历年来海岛自动气象站故障及失效模式的统计和分析,总结分析故障原因。根据设备维护人员多年气象设备保障工作积累总结的经验,从海岛自动气象站结构和防护要求出发,集成应用市场上优质材料、先进工艺和多种成熟、关键设备防护技术,形成一些气象设备防护的有效方法措施,以提高海岛自动气象站对海洋环境的适应性和性能,延长设备使用寿命。