天然矿泉水特殊组分的地球化学初步研究

本文以ＧＢ８５３７－８７《饮用天然矿泉水国家标准》为依据，从理论上阐述了天然矿泉水特殊组分（锂、氡、锶、铁、锌、溴、氟、碘、钼、偏硅酸、偏硼酸、硒、二氧化碳）的物理化学性质，分布、岍存形式及迁移规律，以便对我国矿泉水勘察和开发能有所裨益。     

地震作用下的导管架海洋平台结构动力优化设计研究

把导管架海洋平台看作钢框架结构，并把优化方法用于结构的抗震设计中；以结构的总重量最小为优化目标，导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。通过渤海BZ28—1油田储油平台为例进行了计算，计算结果表明，此方法对海洋平台的设计具有一定的参考意义。     

Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

南海陆坡天然气水合物成藏的构造环境

南海是西太平洋最大的边缘海之一，其复杂的构造演化，形成了构造特征迥异的南海陆缘，有利于天然气水合物的发育，南海地区在中中新统以上发育了上中新统，上新统和第四系3套地层，3套地层所对应的地质时期的沉降速率在纵横向上的差别均较为悬殊，总体而言，南海第四纪整体沉降速率较大，为天然气水合物压力场环境的形成提供了有利条件，南海复杂的构造背景形成了丰富多彩的构造地质体，特定的构造地质体与水合物形成关系密切，这里讨论了滑塌体、泥底辟、增生楔等构造地质体在南海的分布情况，分析了上述构造体与气体水合物地震标志BSR之间的关系，以及特殊构造带在南海的展布规律，提出了特殊的造带中天然气水合物的成藏模式。     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

基于放样原理的特种罐内测法容量计量技术

特种罐在能源的储备和运输中具有重要意义,在研究特种罐现有容量计量技术的基础上,自主创新提出了基于放样原理和测量机器人实现特种罐容量快速和精密计量的原理和方法。将特种罐容量计量转化为点位放样问题,较好地克服了全站仪现有测量技术的缺点,并利用软件实现了特种罐容量计量的数据采集、数据计算、数据修正和报表输出的一体化。通过实际测量数据,分析了该方法的测量精度和测量效率。     

城市框架数据的更新模式及应用研究

分析了利用竣工测量数据、VRS技术及高分辨率影像更新城市框架数据三种模式的可行性,给出了适合青岛地区框架数据的更新方案.     

我国西部特殊景观区化探方法研究进展

西部特殊景观区的化探方法研究一直是中国化探界的一个研究热点和难点.在岩石出露、水系发育地区可以沿用传统的水系沉积物化探方法,但在覆盖景观区,常规化探方法效果并不理想.目前,谢学锦和王学求所提出的深穿透地球化学方法,经过一系列的实验研究,证明其能在覆盖区达到快速有效地圈定战略靶区的作用,具有广泛的应用前景.要做好西部特殊景观区的化探工作,化探科研人员必需采取新方法、新思路,继续系统地开展化探方法技术研究,通过不懈的努力最终找到一套适合中国西部特殊景观区特别是覆盖区的行之有效的化探方法.