全站仪交汇法在高速公路路面沉降监测中的应用

文章介绍了全站仪交会法沉降监测,方便简洁地解决了测量人员不能进入的高速公路等特殊位置的测量问题,并通过对该方法的精度分析,论证了其可行性和有效性,对以后类似的测量工作提供经验和依据。     

二维动画地图表示方法的研究与应用

本文根据动画地图表示内容和常用动画技术的特点,对二维动画地图的表示方法进行了探讨。归纳了基于空间分布特征的表示方法、基于动画地图用途的表示方法和基于动画技术的表示方法及其分类,并讨论了影响选择表示方法的因素和几种表示方法相互配合的应用规律,对动画地图可视化的理论与技术的研究有一定参考。     

基于历史关系数据库的时空数据库实现研究

时空数据库是研究如何存储历史和当前的时空数据,从而跟踪分析某一区域的变化,最终实现时空模型化和模拟地学过程.采用历史关系数据库模式的时空数据库可以充分利用传统时态数据库时态查询功能和GIS空间分析处理功能这些方面成熟的研究成果和现有系统,降低时空数据库建立的费用和开销.分析了采用扩展关系型时空数据库的原因,介绍了历史关系数据库模式、时态关系代数和查询语言,研究了采用历史关系数据库模式在全关系化空间数据库中组织时态信息的方法,从而实现时空数据库.以麦地轮作为例说明了采用历史关系数据库模式建立时空数据库的可行性和有效性.     

变形监测信息管理系统的设计与实现

介绍了GIS数据管理与图形显示的优势、组件技术,设计了变形监测数据管理系统平台,实现了变形监测数据的智能化管理、分析与预测.     

Formation Dynamics and Quantitative Prediction of Hydrocarbons of the Superpressure System in the Dongying Sag

Based on the theory of formation dynamics of oil/gas pools, the Dongying sag can be divided into three dynamic systems regarding the accumulation of oil and gas： the superpressure closed system, the semi-closed system and the normal pressure open system. Based on the analysis of genesis of superpressure in the superpressure closed system and the rule of hydrocarbon expulsion, it is found that hydrocarbon generation is related to superpressure, which is the main driving factor of hydrocarbon migration. Micro fractures formed by superpressure are the main channels for hydrocarbon migration. There are three dynamic patterns for hydrocarbon expulsion： free water drainage, hydrocarbon accumulation and drainage through micro fissures. In the superpressure closed system, the oil-driving-water process and oil/gas accumulation were completed in lithologic traps by way of such two dynamic patterns as episodic evolution of superpressure systems and episodic pressure release of faults. The oil-bearing capacity of lithologic traps is intimately related to reservoir-forming dynamic force. Quantitative evaluation of dynamic conditions for pool formation can effectively predict the oil-bearing capability of traps.     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

基于ArcScene的建筑物日照分析模块的设计与实现

介绍了利用ArcObjects开发、基于ArcScene的建筑物日照分析模块的研制,对各个子模块作了介绍。特别对涉及到的日照分析技术、阴影动态显示、3维建筑设计等技术做了详细的说明。最后对该模块的应用做了简要演示。     

GM（1，1）动态模型在吴江市地下水水位预测中的应用

以吴江市地下水水位预测为例,详细阐述了地下水水位时间序列的GM（1,1）动态模型的原理和建立过程,并根据模型的预测值和实测值,对模型的精度进行了检验,结果表明,模型的预测精度达到了99．27％,等级属于Ⅰ级,具有实际的应用价值,为地下水资源的科学管理提供了依据。     

地铁隧道结构变形监测信息管理系统的开发

地铁隧道结构变形监测的特殊性、周期性和长期性,使其信息量非常庞大.信息管理是地铁隧道结构变形监测中一项重要的工作,现有的管理方式效率很低.为了高效、准确地管理监测信息,及时分析预报地铁隧道结构的稳定状况,本文结合南京地铁运营期隧道结构变形监测实例,开发了一套具有变形监测资料存储、预处理、管理分析、可视化分析、预测预报及限值预警等功能的信息管理系统,保证了准确及时快速的数据处理和信息反馈,具有良好的运用和推广前景.     

分布式光纤传感技术在滑坡监测中的应用

将分布式光纤传感技术引入滑坡监测,既可得到整个滑坡体的概要特征,又能提高监测效率。FBG与BOTDR是两种最具代表性的分布式光纤传感技术,FBG通过测量其反射光波长的变化获得应变或温度值。BOTDR通过测定后向布里渊散射光的频移实现分布式温度、应变测量。FBG传感器灵敏度高,但只能实现离散点的准分布式测量,BOTDR可实现分布式、长距离、不间断测量,但其空间分辨率不高。笔者提出FBG与BOTDR联合监测滑坡的方案。在巫山残联滑坡,在整个滑坡体上铺设监测光纤,利用BOTDR获得整个滑坡体的概要信息;在滑坡体变形的关键部位———变形缝安装FBG传感器,获得某些关键部位的应变信息,从而实现由点到线再到面的监测,获得滑坡体较完整的应变信息。