基于速度场模型的区域CGCS2000坐标实时转换

从WGS84到CGCS2000的坐标转换,涉及坐标框架转换和历元转换两个问题.如何提高大区域坐标转换精度,是一直以来的研究热点,针对大区域坐标转换精度较低的问题,考虑历元转换,提出融合速度场改正信息的坐标转换方法.该方法对建立速度场改正模型进行了研究,分析比较了各模型的精度和可靠性,在此基础上选择一种模型用于实现CGC...     

地球参考系的实现

本文简要讨论了组合不同空间技术建立全球最优协议地球参考架（ＣＴＲＦ）的理论和方法；重点分析了影响ＣＴＲＦ稳定的几种主要地球长期形变因素的性质和规律。首次考虑到地球质心运动对ＣＴＲＦ的影响，提出了协议地球质心的概念，给出了更为完整的四维地面点位模型。     

Planar rocking response and stability analysis of an array of free‐standing columns capped with a freely supported rigid beam

This paper investigates the planar rocking response of an array of free‐standing columns capped with a freely supported rigid beam in an effort to explain the appreciable seismic stability of ancient free‐standing columns that support heavy epistyles together with the even heavier frieze atop. Following a variational formulation, the paper concludes to the remarkable result that the dynamic rocking response of an array of free‐standing columns capped with a rigid beam is identical to the rocking response of a single free‐standing column with the same slenderness yet with larger size, that is a more stable configuration. Most importantly, the study shows that the heavier the freely supported cap beam is (epistyles with frieze atop), the more stable is the rocking frame regardless of the rise of the center of gravity of the cap beam, concluding that top‐heavy rocking frames are more stable than when they are top light. This ‘counter intuitive’ finding renders rocking isolation a most attractive alternative for the seismic protection of bridges with tall piers, whereas its potential implementation shall remove several of the concerns associated with the seismic connections of prefabricated bridges. Copyright © 2012 John Wiley & Sons, Ltd.     

国外测绘机构大地测量的新动向

本文概述国外测绘机构大地测量的动向 ,目的在于了解全球大地测量的发展趋势 ,作为借鉴。综观各国的大地测量动向可以看出 ,高精度国家大地控制网的建立 ,都是采用 GPS,无一例外 ,而且它们之间只是细节上的差异。从各国建立高精度大地控制网的目的来看 ,都是为多学科服务的。面对这样的总趋势 ,大地测量工作者必须拓宽知识面 ,迎接新的挑战。     

Pseudo‐dynamic seismic response of reinforced concrete frames infilled with non‐structural brick masonry

This paper presents pseudo‐dynamic test results on the in‐plane seismic behaviour of infilled frames. Thirteen single‐storey, single‐bay, half‐size‐scale, reinforced concrete‐frame specimens, most of which infilled with non‐structural masonry made of perforated bricks and cement mortar are tested. The infills are in contact with frames, without any connector; openings are not covered. The frames are different in their strength and details, reinforcement grade, and aspect ratio. Seismic input is the 1976 Tolmezzo (Friuli, Italy) ground acceleration, to which specimens are subjected two times: virgin and damaged by the previous test. The global seismic response of initially virgin infilled specimens considerably differs from that of bare specimens. This follows a dramatic change of properties: compared to a bare frame, the initial stiffness increases by one order of magnitude, and the peak strength more than doubles. The peak drift lessens; however, the displacement ductility demand does not. The energy demand is greater. Nevertheless, the influence of infill decreases as damage proceeds. Displacement time histories of damaged specimens are quite similar. At the local level, infill causes asymmetry and concentration of the frame deformation. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of Overpressure on Rock Frame and Its Implications for Overpressure Evolution

Overpressure is a hot topic in the study of sedimentary basins. It is important in generation,maturation migration,and accumulation of hydrocarbon,but the effects of overpressure on rock frame have not been investigated. In this study,experiments were carried out to study the effects of overpressure on rock frame structures using five core samples from the Junggar basin,Northwest China. The deformations and velocities for the samples were measured at different effective pressures related to non-equilibrium compaction and fluid expansion overpressure mechanisms. The results show that the effect of overpressure on rock frames gradually increases when the effective pressure drops down to a certain value (called critical pressure). Moreover,non-equilibrium compaction mechanism has more effects on rock frames than fluid expansion mechanism under the same effective pressure. Furthermore to study rock frame structural changes,we use Kuster and Toks?z's expressions to simulate the effective aspect ratios of inclusions α (penny shapes) for different effective pressures. The results show that the α decreases dramatically when the effective pressure decreases from the critical pressure. Changes of α can be interpreted as responses to the rock frame changes when grains conform one another by rotating and self-adjusting. However,different mechanisms of overpressure have different effects on rock frames. The rock frame can be affected more easily by overpressure in shallow regions generated by non-equilibrium compaction mechanism. Once this kind of rock frames are preserved after overpressure releases to a normal hydrostatic pressure,they can be identified by their specific rock frame characters. This method provides a new way to study overpressure release and fluid migration and accumulation.     

A nonlinear macroelement model for the seismic analysis of masonry buildings

The macroelement technique for modelling the nonlinear response of masonry panels is particularly efficient and suitable for the analysis of the seismic behaviour of complex walls and buildings. The paper presents a macroelement model specifically developed for simulating the cyclic in‐plane response of masonry walls, with possible applications in nonlinear static and dynamic analysis of masonry structures. The model, starting from a previously developed macroelement model, has been refined in the representation of flexural–rocking and shear damage modes, and it is capable of fairly simulating the experimental response of cyclic tests performed on masonry piers. By means of two internal degrees of freedom, the two‐node macroelement permits to represent the coupling of axial and flexural response as well as the interaction of shear and flexural damage. Copyright © 2013 John Wiley & Sons, Ltd.     

洛阳热电厂汽机主厂房2、3号机房爆破拆除技术

绍了采用控制爆破拆除大跨度工业厂房的施工方法，主要论述了在要求振动较小情况下，怎样控制爆破参数。     

行政边界对城市群城市用地空间扩张的影响——基于京津冀城市群的实证研究

作为静态的抽象地理要素,行政边界如何影响城市用地的空间扩张过程?以城市群为研究对象,从理论的角度出发,构造符合中国城市群发展历程的行政边界效应阶段模型,并根据城市群发育过程中行政边界对城市用地空间扩张的影响,将其分为四个阶段：隐形阶段、异化阶段、疏导阶段和消融阶段,分析不同阶段城市群城市用地扩张的空间特征和动力机制。研究以京津冀城市群为实证案例,采用趋同分析和β回归方程测度不同类型行政边界对城市用地扩张的边界效应。研究表明：行政级别跨度越大,边界效应越大,城市间城市用地扩张规模的差距也越大;行政边界对城市用地空间扩张的影响具有长期性和累积性的特点,时间越长,边界对城市用地扩张的影响效应越显著。为突破行政边界制约、合理划定城市开发边界、实现城市群城市用地理性扩张提供理论支撑和政策建议。     

城镇防沙的理论框架与技术模式

城镇防沙是在国家需求推动下产生的新领域,在没有形成自身理论体系的情况下,只能以风沙物理学、治沙工程学、恢复生态学,以及沙漠化防治和可持续发展等相关理论与技术为基础,通过工程实践和理论研究逐步建立城镇防沙理论体系。初步总结出的城镇防沙理论体系包括风沙灾害成因与区域风沙流场特征、城镇周边土地利用空间格局优化、防沙工程体系优化配置、防沙工程效率评估与预测4个分支领域,14项主要研究内容和9个支撑学科;技术体系包括8个分支技术领域和一个总目标（即:城镇防沙技术优化模式）。除青藏高原外的城镇防沙技术模式具有圈层结构特征,第一圈层都是以市（镇）区为核心的绿化景观带。对于地处半湿润风沙区外缘的城镇,第二圈层为高效农牧业生产区,第三圈层为生态涵养圈,第四圈层为封禁保护圈。对于半湿润风沙区内部的城镇,第二圈层为农牧业生产与沙丘封禁区,第三圈层为封禁保护圈。对于半干旱风沙区城镇,第二圈层为沙丘（地）封禁与农牧业生产区,分为近郊设施农业圈、远郊沙丘（地）封禁与农牧户独立生产圈两个次级圈层,第三圈层为沙丘（地）封禁保护圈。对于干旱风沙区城镇,第二圈层为节水灌溉农业区,第三圈层为外围防护带,第四圈层为封禁保护带。对于地处青藏高原山间盆地的城镇,防沙工程一般采取近郊“防护林带+人工草地+灌溉系统”,外层为“沙障+防护林带+人工草地+灌溉系统”,再外层为“防护林带+草地改良+封禁保护”的布局模式。对于地处青藏高原河流宽谷的城镇,防沙工程技术模式在宏观上根据河道走向布局,局部充分考虑防沙治沙与河道整治、水土流失和地质灾害治理有机结合,细节上依据沙尘源地类型和分布地貌位置选择防沙技术。