A-10绝对重力仪残差谱分析

自由落体式绝对重力仪A-10的测量数据拟合残差呈现出明显的周期信号,对4个测站的残差进行FFT处理,并进行频谱分析,结果表明残差组平均的频谱更加稳定,主峰频率与测站无关,主峰幅值与测站明显相关,加周期项改正的绝对重力值偏小。     

基于小波变换的长周期桥梁选波方法研究

时程分析输入地震波的选取对长周期大跨度桥梁影响显著。本文基于规范目标谱,以MATLAB为依托,通过选取最优小波基并利用小波系数迭代法实现频域调整,使地震波反应谱不断逼近给定目标谱,最后结合相对误差和长周期拟合参数两个指标进行综合评价,选取适用于长周期大跨度桥梁的时程分析地震波,提出长周期桥梁全过程批量选波方法。将该方法应用于奉节长江大桥,与基于时域调整方法的Seismo Match选波软件对比选波效果,并将选波结果应用于背景桥梁的时程分析。结果表明,利用本文选波方法所得结构关键截面响应与软件选波所得响应在横桥向和竖桥向存在一定差异。本文方法可为长周期大跨度桥梁时程分析选波提供参考。     

长江黄河源区高寒草甸退化研究进展

长江黄河源区内高寒草甸退化是当前研究的热点问题之一。但多数研究中涉及的源区范围、高寒草甸的分类、高寒草甸的退化原因及恢复治理措施等方面,各学者的看法并不相同,难以实现各项研究结果的比较研究。从源区范围、高寒草甸的分类、高寒草甸的退化原因及恢复治理措施等方面阐述了各学者研究的差异,指出:长江黄河源区高寒草甸的进一步深入研究有必要对源区的范围进行界定;高寒草甸的分类常常因研究目的不同而有所差异,以退化程度进行的分类能够反映高寒草甸的动态变化过程,但需要定量指标对退化的不同程度进行界定;遥感影像解译的结果由于遥感影像本身的不确定性和主观因素的影响而难以统一;退化的原因目前主要集中于自然因素和人为因素两方面的研究,针对这些因素采取的控制措施在局部区域取得了一定效果,但并没有抑制高寒草甸在总体上的进一步退化,寻找一种综合的有效的治理措施还是今后的研究目标。     

CSAMT和MT在兰州新区地热勘查中的应用探讨

兰州新区地处秦王川盆地,盆地内具有地热形成的条件,地热成因兼有断裂构造控制型和沉积盆地型,具有较好的地热勘查前景。结合可控源音频大地电磁测深、大地电磁测深2种方法相互验证,查清了区内断裂构造,基底构造形态,为地热勘查提供了依据,避免了单一方法的片面性和盲目性。经钻孔验证勘查效果较好,为今后类似地区进行地热勘查提供了有价值的参考。     

烃源岩不同性质有机酸的分离及其检测方法

烃源岩中的有机酸来源于有机质,但有机质具有不同的赋存形式,有机酸具有不同性质,这将影响有机酸与不同赋存有机质的关系,进而影响分离和检测方法。文章在总结前人对有机质赋存形式和有机酸性质等特征的基础上,提出烃源岩中的有机酸并以非单一的形式存在,具有水溶性、脂溶性和难溶性有机酸三种类型,游离有机质中存在水溶性和脂溶性有机酸,而结合有机质中存在水溶性、脂溶性和难溶性有机酸。因此在检测方法上需采取分步分离的方法,且根据有机酸的性质选取合适的检测方法,即水溶性有机酸利用离子色谱检测,索氏抽提得到的脂溶性有机酸利用气相色谱—质谱检测,通过酸解抽提残渣得到的难溶性有机酸利用红外光谱检测,全面系统地认识烃源岩中有机酸含量和类型等特征。这对进一步探讨烃源岩各种类型有机酸特征和演化规律,深化烃源岩有机质生烃以及有机—无机相互作用等机理都具有重要意义。     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.     

压裂微震数据初至拾取的时频谱熵法

在油气田开发过程中,微震监测是获得水力压裂引起裂缝分布的一种较为有效的方法。微震的定位成像与裂缝解释需要利用有效微震信号位置,而微震信号具有低信噪比的特点,传统信号拾取方法无法有效实现较低信噪比条件下初至时刻的准确拾取。本文提出一种基于时频谱熵的初至拾取新方法,该方法首先通过S变换获取含噪信号的时频谱;然后对谱内各个采样点沿频率方向进行分帧操作,并计算每帧频段内的近似负熵值,以最小近似负熵值作为该谱点的负熵值;最后沿时间方向比较各谱点的负熵值,最小值对应的时刻即为初至时刻。本文利用不同信噪比的合成地震数据对该方法进行效果验证,并与长短时窗能量比（STA/LTA）法进行拾取结果对比,结果表明：信噪比在-5 dB时,两种方法拾取效果都很好;信噪比在-10 dB时,时频谱熵法拾取效果更好。时频谱熵法更适合低信噪比情况下的信号初至拾取。     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

GPM和TRMM卫星日降水数据在黄河源区的适用性分析

通过评估GPM计划三种日降水产品（IMERG-E、 IMERG-L和IMERG-F）和TRMM卫星、 两种日降水产品（TMPA 3B42和TMPA 3B42RT）在黄河源及其周边区域38个台站的适用性, 探究了五种产品探测精度和海拔高度及雨强的相关关系, 结果表明： 在与实测资料的一致性和偏差方面, GPM卫星产品要全面优于TMPA产品。在TRMM卫星产品中, 3B42产品明显优于3B42RT。五种产品的相关系数均表现出明显的从东南到西北递减的趋势, 均方根误差北部普遍低于南部。IMERG产品的探测率（POD）和探测成功率（CSI）都要普遍高于TMPA产品, 而误报率（FAR）则是TMPA 产品更低, 表现更好。五种产品均在个别台站出现了严重误报的情况, 这些台站主要分布在研究区的西北部。IMERG三种产品对于海拔高度的依赖程度具有很强的一致性, 而3B42RT产品对海拔高度几乎没有依赖。除3B42RT产品外, 其余四种产品的偏差均随雨强的增加而增大。在探测率方面, IMERG产品对小雨、 中雨和大雨的探测能力均优于TMPA产品。     

高分异花岗岩浆可能是华南花岗岩型铀矿床主要铀源——来自诸广山南体花岗岩锆石铀含量的证据

锆石的U-Pb测年、Hf和O同位素及稀土、微量元素的研究与应用已获得诸多进展,但锆石中铀含量所蕴藏的地质意义却较少被关注。华南花岗岩型铀矿床的铀源一直存在争议,不同观点认为其分别来自早期已固结地质体、分异岩浆、地幔柱或热点以及U、Th、K富集圈。为尝试利用锆石中的铀含量来追索铀源,本文通过搜集诸广山南体花岗岩锆石U-Pb同位素测年文献,掌握了该花岗岩中14个岩体、37件样品、3种岩性,共467个锆石定年数据。通过数据分析发现印支期(253Ma、244Ma)和燕山期(139Ma、124Ma)具高分异特征的4件酸性岩脉(小岩体)样品中锆石的铀含量明显高于同期岩体。依据铀矿床中高分异酸性岩脉(小岩体)侵位期、基性岩脉侵位期、铀成矿早期(140~90Ma)三者的良好对应关系,结合这一锆石铀含量指示,初步认为华南花岗岩型铀矿床中铀可能主要来自高分异花岗岩浆;推测花岗岩型铀成矿可能属壳幔混合作用结果,即铀源来自地壳分异岩浆,成矿流体和矿化剂主要来自地幔,而成矿空间受断裂系统控制。岩体锆石铀含量或可在铀源丰度、矿床品位判别等方面发挥积极作用。